Results 61 to 70 of about 395 (100)
Grain Refinement Mechanism of 00Cr19Ni10 Austenite by Hot Equal Channel Angular Pressing
Teshugang, 2007 150~350 nm super finc grain structure of φ8 mm round stainless steel 00Cr19Ni10-0.025C,18.75Cr, 10.96Ni has been obtained by 8 pass equal channel angular pressing(ECAP)with extrusion speed 9 mm/s at 700 ℃.The structure evolution of steel in ECAP was ...
王昌 +4 more
doaj
Teshugang, 2014 The test steel 1Cr17Mn6Ni5N (/% ： 0. 09 ~ 0.11C, 0.19 ~ 0.29Si, 7.33~7.42Mn, 0.011 -0.015P, 0. 004 ~ 0. 007S, 16. 87 ~ 17. 24Cr, 5. 06 ~5.19Ni, 0. 21 ~0.
杨吉春, 高福彬, 李艳峰
doaj
Analysis of the seawater FGD process and characteristics in Songyu Thermal Power Plant [PDF]
, 2007 介绍了厦门嵩屿电厂4×300MW燃煤机组烟气海水脱硫系统所选用的工艺,分析了海水FGD系统的主要技术特点,为日益增多的同类型脱硫装置的工艺设计与设备选型提供一定的借鉴。The technical process applied on the flue gas seawater desulfurization project in 4×300MW units in Songyu Power Plant was introduced.Its main technical characteristics ...
陈进生
core
Teshugang, 2013 The steel 316LN for test (/% : 0.015C, 0. 65Si, 0. 90Mn, 17.3Cr, 12.8Ni, 2. 6Mo, 0. 018 ~ 0. 200N) is melted by a 50 kg vacuum induction furnace, adding chromium nitride in atmosphere after vacuum refining.
陈海涛, 罗毅军
doaj
Investigation of Electrochemical Modification and Preparation of Bioactive Composite Coating on Titanium Surface [PDF]
, 2006 钛及钛合金作为植入体材料具有优良的机械性能和生物相容性，但本身不具备生物活性，需要通过表面修饰改性使之具备诱导骨组织长入并与植入部位实现骨性结合的能力。目前已采用各种表面处理方法在钛及钛合金表面改性和制备生物活性陶瓷涂层。本文首先通过电化学阳极氧化工艺，在钛表面形成了具有多孔结构的陶瓷氧化膜，并结合XRD、SEM以及电化学交流阻抗等方法对其形貌、成分和结构进行了表征。在SBF中诱导沉积HAp，以期得到具有生物活性、可促进细胞的粘附和生长的表面形貌和结构。结果表明 ...
黄龙门
core
Study of Thermal Deformation Behavior of Uranium-molybdenum Alloys by Compression Experiments [PDF]
In order to study the thermal deformation behavior of uranium-molybdenum alloy, and to provide theoretical support for the design of uranium-molybdenum alloy press working, Gleeble3800 thermo-mechanical simulator was utilized to perform single-pass ...
HU Bingkun1, 2, LI Mingyang1, 2, HE Yabin1, 2, DU Yanhua1, 2
core +1 more source
Teshugang, 2017 According to double film theory the kinetics model of blowing nitrogen alloying in steel liquid during stainless steel refining is established. By using silicon-molybdenum bar furnace the effect of nitrogen blowing time (0~70 min), nitrogen partial ...
时彦林, 张士宪
doaj
Preparation and biological property of Chitosan/Hydroxyapitate composite for internal fixation of bone fracture [PDF]
, 2010 虽然传统的金属骨折内固定材料在骨折内固定中一直占据主导地位，但是也存在着应力遮挡作用、腐蚀引起的慢性炎症和诱发不良反应、需二次手术取出等不可避免的缺点。因此，从20世纪60年代开始，国内外许多学者开始投入可吸收骨折内固定材料的研究，并取得一定成绩。壳聚糖/羟基磷灰石复合材料由于其良好的生物相容性、骨传导性和骨诱导性在骨修复材料的研究中占据重要地位。但是，目前壳聚糖/羟基磷灰石复合材料存在力学性能不佳及随羟基磷灰石含量增加力学性能下降的问题，限制了其在骨折内固定材料方面的应用。 本文在原位沉析法的基础上 ...
孙珍珍
core
Teshugang, 2016 By finite element software Ansys the simulation on temperature and heat transfer of tool and die in hot extrusion process of TP304 austenite stainless steel tube to get the distribution of temperature and heat flux of die steel X38CrMoV5-3 extruding ...
王伯文 +5 more
doaj
, 1997 通过在不锈钢钝化处理液中分别添加Cl---、fE--（3+）等常见化学杂质,对18-8不锈钢进行钝化处理,应用电化学方法测量点腐蚀临界电位等腐蚀参数,考察钝化液中化学杂质对不锈钢表面耐蚀处理效果的影响 ...
杜荣归, 林昌健
core