Results 1 to 10 of about 59,964 (127)
Graphic Abstract Abstract Electrochemical tests and surface analysis were applied to study the corrosion behavior and passive film characteristics of three‐dimensional‐printed NiTi shape memory alloys fabricated by laser‐powder bed fusion (L‐PBF) in artificial saliva at 37 °C. The passivity of L‐PBF NiTi shows to be influenced by the process parameters
Ming Liu +5 more
wiley +1 more source
针对中央空调冷却水循环系统中的腐蚀问题,进行了单独投加臭氧、单独投加缓蚀剂、臭氧及缓蚀剂联合使用三种情况下对空调冷却水的缓蚀试验研究。结果表明,臭氧单独作用时,腐蚀速率为0.14~0.26 mm/a,缓蚀率为25%~55%。臭氧与钼酸钠共同作用时,碳钢的腐蚀速率小于0.16 mm/a,缓蚀率大幅度提高,两者有很好的协同作用。
李梅, 刘燕菊
doaj +2 more sources
阐述了低压锅炉运行中氧腐蚀的特征、机理、影响因素以及危害,表明低压锅炉运行中的腐蚀主要是氧腐蚀,介绍了TGS-A新型除氧剂的除氧机理和现场应用,表明TGS-A除氧剂除氧效果明显,能够有效地控制锅炉的氧腐蚀,延长锅炉使用寿命,保证锅炉安全运行。最后阐述了锅炉除氧对锅炉安全经济运行的意义。
张玉忠, 彭晓敏, 康利君
doaj +2 more sources
ABSTRACT To meet the escalating demand for high‐performance LiCoO2 (LCO) cathodes, elevating the charging cut‐off voltage becomes highly imperative to achieve markedly enhanced specific capacities. However, high‐voltage operation is always accompanied by structural instability, notably deleterious bulk phase transitions and severe interfacial ...
Jiawei Mu +7 more
wiley +1 more source
ABSTRACT This study developed a metal–modified fluoroethylene vinyl ether (FEVE) organic coating on 6061 aluminum alloy, supported by a micro‐arc oxidation (MAO) pretreatment layer, to enhance corrosion resistance and antifouling performance in marine environments.
Chang Liu +5 more
wiley +1 more source
ABSTRACT Mechanical dynamic sealing components are usually subjected to the erosion of a hydrothermal environment; thus, the selected service materials must meet stringent requirements for superior self‐lubrication, corrosion resistance, and thermal stability.
Yanchun Zhao +8 more
wiley +1 more source
ABSTRACT The intricate corrosion environment necessitates the polymeric coating's adaptability to the surroundings. In this work, the integration of rare‐earth Ce(III) ions and ethylene diamine tetramethylene phosphonic acid (EDTMP) in a layered double hydroxide (LDH) material is developed to enhance the corrosion protection and anti‐wear properties of
Yangu Liu +9 more
wiley +1 more source
ABSTRACT Interface polarization enhancement and impedance matching optimization are the keys to improving the comprehensive performance of microwave absorbing materials (MAMs). Herein, a green synthesis strategy integrating sacrificial template self‐etching, hydrothermal reaction, and annealing treatment is proposed to successfully fabricate urchin ...
Zhenzhen Tian +8 more
wiley +1 more source
将臭氧应用在中水回用于工业循环冷却水系统的处理中,研究在不同臭氧投加量下模拟循环冷却水系统中的腐蚀情况,并对中水主要存在的COD、NH3-N较高问题加以研究。结果表明:当臭氧投加质量浓度为3.5mg/L时,臭氧缓蚀能力最佳,碳钢挂片腐蚀率最低为0.303 5 mm/a,缓蚀率为51.67%,臭氧与DJNP01共同作用时腐蚀率为0.189 3 mm/a,具有较好协同作用。CODCr和NH3-N的去除率分别为70.2%、65%,达到工业水补水水质要求。
李雪, 陈康, 焦莉莉, 冯长春
doaj +2 more sources
ABSTRACT By adding CuO, the worm‐like amorphous phase and atomic clusters were simultaneously introduced, enabling the (Ni40Ti40Cu20)99.9O0.1 alloy micron columns to exhibit a uniform flow strain of over 40% and a strength of over 2.5 GPa during compression.
Huwen Ma +13 more
wiley +1 more source

