Results 21 to 30 of about 1,619,324 (134)

Laser‐Directed Energy Deposition of Ti2AlNb Alloy: As‐Deposited Ultrahigh Strength and Heat‐Treated Strength–Ductility Balance

open access: yesRare Metals, Volume 45, Issue 9, September 2026.
ABSTRACT An ultra‐high as‐deposited tensile strength of 1408 MPa—the highest reported value for laser‐directed energy deposition (L‐DED) fabricated Ti2AlNb alloy—is achieved in this study. The as‐deposited microstructure consists of coarse B2 grains with a high density of fine acicular O phase precipitates within the grains, along with a brittle α2 ...
Ximiao He   +7 more
wiley   +1 more source

Synergistic Effect of Hydrophilic Surface and Nano‐Ag2O in TiO2‐Based Composites Coating on Antibacterial and Osteogenic Properties of Low Modulus Ti‐Mo‐Ag Alloy

open access: yesRare Metals, Volume 45, Issue 9, September 2026.
ABSTRACT Ti‐15Mo‐2.5Ag alloy exhibited a low modulus and strong antibacterial ability but poor bioactivity. To resolve this problem, sandblasting and anodization were used to create a hydrophilic and nano‐Ag2O‐containing TiO2 coating. Subsequently, the microstructure and physicochemical properties were investigated by scanning electron microscopy, X ...
Yanchun Xie   +11 more
wiley   +1 more source

人工湿地-氧化塘工艺组合对氮和磷去除效果研究

open access: yes, 2004
本文在小试规模上,研究了下行流湿地、推流床湿地、氧化塘和兼性塘四种处理单元的四种工艺组合对氮、磷的去除效果,研究结果表明:下行流湿地+氧化塘工艺组合具有较好的充氧效果,推流床湿地后置也可以提高出水的溶解氧。四种工艺组合对离子和TP、IP的去除无显著差异。人工湿地中硝化作用的发生有利于NH+4 N的去除,增加氧化塘可以提高系统的硝化能力,但同时也会增加出水中的NO-3 ...
陈德强,吴振斌,成水平,付贵萍,贺锋
core   +1 more source

Achieving High Strength in Metastable β‐Ti Alloys via ω‐Reinforced Heterostructures With Ultrafine Hierarchical Nano‐Martensites

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT Precipitation of isothermal ω phase is an effective way to strengthen the metastable β‐Ti alloys but generally severely embrittles the materials by suppressing stress‐induced martensitic transformation and deformation twinning. Here, we architect heterogeneous structures with tailored ω phase in a metastable β‐Ti‐20Zr‐12Nb‐2Sn alloy via ...
Yang Liu   +6 more
wiley   +1 more source

Microstructure Tailoring of Laser Powder Bed Fused Nb521 Alloy Toward Strength‐Ductility Synergy

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT Niobium‐based refractory alloys are promising candidates for high‐temperature aerospace structures, yet their limited ambient‐temperature ductility and poor processability remain major barriers to broader implementation. Here, Nb521 alloy was fabricated by laser powder bed fusion (LPBF), and the effects of processing conditions and subsequent ...
Lele Qin   +7 more
wiley   +1 more source

In Situ Preparation of Ti2Ni/NiTi Dual‐Phase Alloy With High Wear Resistance and Damping Performance by Additive Manufacturing

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT Many metallic components are frequently subjected to coupled environments of friction and vibration, stemming from interfacial contact and relative motion between mating parts or external stimuli. Consequently, it is imperative for these components to exhibit a synergy of high wear resistance and superior damping properties.
Ze Pu   +12 more
wiley   +1 more source

Thermite‐Synthesized Fe–Ti–Al–Mg High‐Entropy Intermetallic Compound for Efficient Azo Dye Degradation

open access: yesRare Metals, Volume 45, Issue 7, July 2026.
ABSTRACT Most high‐entropy alloys (HEAs) tailored for contaminant degradation suffer from complex fabrication processes and high‐cost alloy design. Furthermore, low‐cost active elements such as Fe and Mg cannot be readily alloyed into HEAs via conventional routes.
Jiajia Si   +5 more
wiley   +1 more source

In Situ Investigation on the Roles of Microstructural Characteristics in Fatigue Anisotropy and Crack Propagation of LPBF–IN718 Alloy

open access: yesRare Metals, Volume 45, Issue 7, July 2026.
ABSTRACT Laser powder bed fusion (LPBF) of Inconel 718 alloy inevitably introduces pronounced microstructural anisotropy, typified by columnar grains and robust crystallographic texture. This results in direction‐dependent fatigue behavior, raising critical reliability concerns for high‐stakes aerospace applications.
Zhifang Shi   +9 more
wiley   +1 more source

Exceptional Multifunctional Performance Enabled by a Network Architecture in Additively Manufactured NiFe‐Based Soft Magnetic Alloys

open access: yesRare Metals, Volume 45, Issue 7, July 2026.
ABSTRACT The mechanical properties and corrosion resistance of traditionally as‐cast soft magnetic Ni‐50Fe alloys often fail to meet current application requirements. To address this limitation, this study employed direct energy deposition (DED) to fabricate two kinds of soft magnetic alloys: Ni‐50Fe and Ni‐48.5Fe‐1.5Cu‐1.5Ti.
Hui Xue   +10 more
wiley   +1 more source

Heterointerfaces and Sulfur Vacancies in MXene/MoS2@C for Boosted Ultra‐Broadband Electromagnetic Wave Absorption and Infrared Stealth Response

open access: yesRare Metals, Volume 45, Issue 7, July 2026.
ABSTRACT Ti3C2Tx MXene shows significant potential in the field of electromagnetic wave absorption; however, the wave absorption performance was hindered due to the impedance mismatch, which was caused by its inherent high dielectric constant. In this work, Ti3C2Tx MXene co‐assembled with molybdenum disulfide nanosheets and carbon coating layers (MXene/
Hualong Yu   +11 more
wiley   +1 more source

Home - About - Disclaimer - Privacy