Results 21 to 30 of about 723,361 (153)

LiNiO2薄膜的电化学技术制备研究

open access: yes四川大学学报. 自然科学版, 2005
采用恒电流电化学技术,在95℃左右的条件下,于Li OH溶液中,直接在镍片上制备了结晶良好的Li Ni O2薄膜.通过XRD,SEM和XPS技术对制备的Li Ni O2薄膜进行了表征;测试结果表明制备的Li Ni O2薄膜表面致密、均匀,为六方层状结构.通过研究,作者得到了适宜的电化学制备Li Ni O2薄膜的工艺条件.
何见超   +7 more
doaj  

Liquid/Solid EGaIn@Ag Heterostructure Catalyst Enabling CO2 Electroreduction to CO in a Three‐Membrane Electrolyzer With Co‐Production of K2CO3 and Cl2

open access: yesRare Metals, Volume 45, Issue 9, September 2026.
ABSTRACT Electrochemical carbon dioxide reduction reaction (CO2RR) powered by renewable electricity offers a sustainable route for producing value‐added carbonaceous chemicals. Herein, a three‐membrane electrolyzer was employed to directly co‐generate carbon monoxide (CO), chlorine (Cl2), and potassium carbonate (K2CO3) from the electrolysis of CO2 and
Shuai Wu   +10 more
wiley   +1 more source

电化学方法制备Ba1-x-ySrxCayWO4晶态薄膜的相关机制分析

open access: yes四川大学学报. 自然科学版, 2005
基于本组采用恒电流技术、直接在金属钨片上以电化学方法制备具有白钨矿结构的钡、锶、钙(包括其复合体系)钨酸盐(Ba1-x-ySrxCayWO4)薄膜的实验研究,分析了利用电化学方法制备功能薄膜中的成膜机制,讨论了晶态薄膜电化学制备过程中的电流密度、电解液酸度、沉积温度和溶液浓度等工艺条件对薄膜形成的影响.该研究结果对利用电化学方法制备相关薄膜也具有重要参考价值.
杨祖念   +6 more
doaj  

Multilayer Architecture of PVD/HVOF Coatings Enables Transition in Wear Mechanism and Enhanced Tribological Performance

open access: yesRare Metals, Volume 45, Issue 9, September 2026.
ABSTRACT TiN films deposited by physical vapor deposition (PVD) are widely used as protective films due to their high hardness and wear resistance. However, their application under high‐load conditions is limited by poor load‐bearing capacity and susceptibility to spalling on soft substrates.
Ziyu Wang   +6 more
wiley   +1 more source

纳滤膜分离技术及其进展

open access: yesGongye shui chuli, 2004
纳滤技术是一种介于超滤和反渗透之间的新型分离技术.作者介绍了纳滤膜的特性及其独特的分离特点,高分子纳滤膜的几种主要制备方法的制备原理、制备要点,国内外纳滤膜在生产研究方面的进展,以及当前已商品化的几种主要的纳滤膜的材质.最后简单介绍了纳滤膜在水处理、食品、生化、医药、染料和化工等领域的应用进展,指出今后的发展将着重于传质机理、新的膜材料及集成工艺开发等方面.
王薇, 杜启云
doaj   +2 more sources

Ultrathin Magnetic–Conductive Heterostructures for Absorption‐Dominant Electromagnetic Interference Shielding

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT Ultrathin, lightweight, and mechanically compliant electromagnetic interference (EMI) shields are increasingly required for high‐frequency electronic devices. However, conventional metallic shields predominantly rely on conductivity‐driven reflection mechanisms, which become ineffective at reduced thickness and may cause severe secondary ...
Zida Zhang   +7 more
wiley   +1 more source

Flexible, Robust Transparent Conductive Films With Excellent Electromagnetic Shielding Properties

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT Transparent conductive films (TCFs) are indispensable components for next‐generation wearable electronics, intelligent robots, and electromagnetic interference (EMI) shielding devices. However, the fabrication of conventional random metallic mesh suffers from an inherent trade‐off between “randomness and controllability”.
Shanghao Lu   +5 more
wiley   +1 more source

Doping‐Engineered Modulation of Oxygen Vacancy Formation Energy in Gallium Oxide for High‐Performance Solar‐Blind UV Photodetectors

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT Solar‐blind ultraviolet (UV) photodetectors (SBPDs) play a critical role in applications including UV communication and fire warning systems. Gallium oxide (Ga2O3) has emerged as a promising material due to its wide bandgap and low cost, but suffers from high dark current and slow response speed caused by oxygen vacancy (VO) defects. This work
Yuhao Lin   +14 more
wiley   +1 more source

一种SOL-GEL制备钛酸锶钡(BST)薄膜新路线的工艺研究

open access: yes四川大学学报. 自然科学版, 2005
研究利用钡、锶的碳酸盐代替醋酸盐,采用sol-gel技术制备Ba1-xSrxTi O3(BST)铁电薄膜的工艺过程.以碳酸钡、碳酸锶和钛酸四丁酯作原料,采用sol-gel工艺制备BST薄膜,对比研究了用两种混合溶剂制胶和制膜的工艺.通过XRD分析了薄膜的结构,用AFM测定表面形貌,结果表明,采用碳酸盐作为钡、锶的原料,用冰醋酸和乙二醇甲醚混合液作溶剂,可配制出澄清透明、能长时间放置的溶胶,并制备出膜厚均匀、表面光洁致密、没有裂纹的全钙钛矿相的BST薄膜.
李桂英, 余萍, 肖定全, 王欢
doaj  

Spatiotemporally Adaptive Bilayer Silk Fibroin–Polyvinyl Alcohol–Metformin Composite Coating on Biodegradable Zinc for Orthopedic Applications

open access: yesRare Metals, Volume 45, Issue 7, July 2026.
ABSTRACT Biodegradable zinc (Zn)‐based materials are considered promising candidates for orthopedic applications because of their favorable mechanical properties, controllable biodegradability, and good biosafety profiles. However, their clinical translation is limited by early‐stage corrosion‐induced cytotoxicity and inflammation, as well as ...
Jinlong Mao   +9 more
wiley   +1 more source

Home - About - Disclaimer - Privacy