Results 31 to 40 of about 23,098 (190)
Novel Non‐Equimolar High‐Entropy Zirconates With Superior Thermophysical Properties
Rare Metals, EarlyView.ABSTRACT Rare‐earth zirconates (RE2Zr2O7) are promising candidates for topcoat materials in thermal barrier coatings (TBCs). However, their practical application in TBCs is limited by poor fracture toughness and low thermal expansion coefficient (TEC).
Taoyi Lu +7 more
wiley +1 more source
Gaoya dianqi, 2013 故障选相是高压输电线路继电保护正确运行的重要环节,也是精确测距的重要前提。传统的故障选相方法仅适用于简单故障,灵敏度较低,容易受系统运行方式、故障接地电阻等的影响。笔者在输电线路各相电流故障分量分析的基础上,借鉴信号能量的概念,给出了故障分量能量的定义,提出一种利用故障分量能量系数实现故障选相的新方法。该方法直接利用故障电流,提取故障分量并计算故障分量前2个周期的信号能量,得到故障状态下各相电流故障分量能量占电流故障分量总能量的比例系数,构造故障相识别特征向量,建立故障选相概率神经网络进行选相 ...
吴浩, 郭辉, 蔡亮
doaj
, 2018 为减少电力系统中断路器投切开关的分闸燃弧和合闸涌流,设计了一种永磁机构断路器的选相分合闸控制系统.系统通过真空继电器的二级驱动方式保证了机械动作时间可控且离散性小,解决了单级接触器驱动方式的机械动作时间离散性大和单级晶闸管驱动方式的驱动电路复杂性的问题.系统以STM32单片机为控制核心,通过电流突变捕捉时刻算法准确捕捉到分合闸动作完成时刻,进而计算出上一次的分合闸机械动作过程时间,预测出下一次的分合闸机械动作时刻,实现了控制系统根据设定的分合闸相角对断路器准确地进行分相投切控制的功能 ...
李钷 +4 more
core
Rare Metals, EarlyView.ABSTRACT This study introduces novel nonequiatomic TiZrCoCrMoCux (x = 0, 5, 10; at%) medium‐entropy alloys (MEAx) tailored for orthopedic implants, synergistically combining the biocompatibility of Ti‐based alloys, the wear resistance of CoCrMo alloys, and the antibacterial/osteogenic attributes of Cu. The alloy's microstructure, mechanical properties,
Hang Yu +9 more
wiley +1 more source
Gaoya dianqi, 2014 选相控制技术在抑制电力系统暂态冲击方面,较传统的安装合闸电阻、增设避雷器等方法更具经济性和先进性。随着智能变电站技术的应用和推广,智能化对选相控制技术提出了新的要求。笔者阐述了智能化选相控制设备的过程层接口实现、过程层数据通讯及设备安装方式,根据智能组件功能集成程度提出了智能选相控制设备两种不同的实现模式,并讨论了该设备的IEC 61850建模及信息交互方式,最后对选相误差控制技术及高级应用进行了总结和展望。
须雷 +5 more
doaj
Dianci bileiqi, 2021 为突破谐振接地系统选线瓶颈,提出一种动态电阻选线方式,运用理论分析和ATP-EMTP仿真试验,确定了选线程序启动方式与动态电阻阻值选取办法。其次通过分析电路模型,得到动态切换为电阻接地方式后的阻性注入电流表达式。最后在国网配电智能化应用及关键设备联合实验室进行现场试验,验证了在谐振接地系统发生永久性单相接地故障时,动态电阻选线方式能准确识别故障发生,判断故障性质,通过阻性电流注入准确选出故障线路,过渡电阻识别能力达到3 500Ω,为谐振接地系统单相接地选线难题提供了一种有效可行的实际解决办法。
孙益辉 +5 more
doaj
Analysis Based on the Simplified Sequence Component Method [PDF]
, 2013 分析了对称分量存在不足,结合平衡线路的模变换数学特性,得出简化序分量法在输电线路的故障分析原理。提出了简化序分量法在短路和断线故障分析及选相原理,解决了距离保护作为yd变压器远后备保护存在的问题。On the basis of an analysis of the disadvantages of symmetrical component,under consideration of mathematical characteristics of the modular transformation ...
谢珍贵, 黄兴平
core
Effect of Ultrasound on Graphite Flotation of Different Stages of Luobei [PDF]
This is an article in the field of mineral processing engineering. In order to explore the influence of ultrasonic pretreatment on the graphite flotation process of different stages, tests on the effects of different ultrasonic time on the roughing and ...
Baocheng ZHANG, Wanli LU, Wenze KANG
core +1 more source
Rare Metals, EarlyView.ABSTRACT Cost‐effective and efficient non‐noble‐metal catalysts for selective lignin hydrogenolysis remain elusive, representing a significant challenge in biorefinery. Here, we prepared a nitrogen‐doped carbon supported CoNi bimetallic catalyst, which was successfully derived from zeolitic imidazolate framework (ZIF) via high‐temperature pyrolysis ...
Xingwei Luo +3 more
wiley +1 more source
Dianci bileiqi, 2022 谐振接地系统单相接地故障的快速就近隔离是配网稳定安全运行的基础，短时改变中性点接地方式产生脉冲电流进行选线成为近年来研究的热点。本研究采用matlab&simulink搭建具有脉冲信号发生装置的谐振接地系统(架空线系统、电缆线系统、缆线混合系统)。在3种系统下，设置任意线路在不同条件下发生单相接地故障，提取各线路脉冲电流进行傅里叶分解，观察故障线路与非故障线路脉冲电流在频域分布上的差异，提出利用脉冲电流在频域分解的直流分量与基波分量之和作为选线依据；通过设置典型的故障点位置、故障相合闸相角 ...
李景丽 +5 more
doaj