Results 11 to 20 of about 108,193,042 (300)

Biocompatibility of 17-4 PH stainless steel foam for implant applications

Bio-Medical Materials and Engineering, 2011
In this study, biocompatibility of 17-4 PH stainless steel foam for biomedical implant applications was investigated. 17-4 PH stainless steel foams having porosities in the range of 40–82% with an average pore size of around 600 μm were produced by space holder-sintering technique.
Mutlu, Ilven, Oktay, Enver
openaire   +4 more sources

Physical and mechanical properties of cast 17-4 PH stainless steel [PDF]

, 1981
The physical and mechanical properties of an overaged 17-4 PH stainless steel casting have been examined. The tensile and compressive properties of cast 17-4 PH are only influenced to a slight degree by changing test temperature and strain rate. However, both the Charpy impact energy and dynamic fracture toughness exhibit a tough-to-brittle transition ...
Rack, H. J.
openaire   +4 more sources

Interfacial reaction and mechanical properties of diffusion bonded titanium/17-4 PH stainless steel dissimilar joint using a silver interlayer

Materials Research Express, 2020
Diffusion bonding of titanium (Ti) to 17-4 PH high strength stainless steel is challenging owing to the formation of brittle Ti-Fe intermetallic compounds (IMCs) at joint interface.
Bo Feng, Yongqiang Deng, Xiaowei Feng, Juan Wang, Kaihong Zheng   +4 more
doaj   +2 more sources

Characterization of Microstructural and Mechanical Properties of 17-4 PH Stainless Steel by Cold Rolled and Machining vs. DMLS Additive Manufacturing [PDF]

Journal of Manufacturing and Materials Processing
The 17-4 PH stainless steel is widely used in the aerospace, petrochemical, chemical, food, and general metallurgical industries. The present study was conducted to analyze the mechanical properties of two types of 17-4 PH stainless steel—commercial cold-
Pablo Moreno-Garibaldi, Melvyn Alvarez-Vera, Juan Alfonso Beltrán-Fernández, Rafael Carrera-Espinoza, Héctor Manuel Hdz-García, J. C. Díaz-Guillen, Rita Muñoz-Arroyo, Javier A. Ortega, Paul Molenda   +8 more
doaj   +2 more sources

Compaction behaviours of 17-4 PH, 316L, and 1.4551 stainless-steel powders during cold pressing

Results in Engineering
Despite numerous recent technological developments, conventional powder metallurgy (CPM) remains the most commonly applied technique for fabricating stainless-steel products.
Mohammed Qasim Kareem, Tamás Mikó, Gréta Gergely, Zoltán Gácsi   +3 more
doaj   +2 more sources

Influence of double solution treatment on hardness in 17-4 pH steel [PDF]

Zaštita Materijala, 2015
The investigated material is a corrosion-resistant, Cu precipitation hardened steel 17-4PH, which undergoes a macroscopic contraction, as a result of applying the following heat treatment: double solution treatment at 1028°C for 1 h (condition A), ageing
Roman Sowa, Wojtan Magdalena Parlinska, Sebastian Arabasz, Andrzej Dziedzic, Irena Dul   +4 more
doaj   +2 more sources

Processing and properties of highly porous 17-4 PH stainless steel

Powder Metallurgy and Metal Ceramics, 2011
Highly porous 17-4 PH stainless steel having porosities in the range of 39–82% with an average pore size of around 700 μm was successfully fabricated using space holder technique in powder metallurgy. Irregular carbamide particles were used as a space holder material. The final porosity was directly related to the added fraction of carbamide.
Mutlu, Ilven, Oktay, Enver
openaire   +2 more sources

3D printing of magnetostrictive property in 17/4 ph stainless steel

Journal of Magnetism and Magnetic Materials, 2023
Additive manufacturing (AM) of metallic alloys significantly advances diverse areas of science/engineering with a prosperous future trend. Although this technology is also very attractive for smart materials development, the creation of a pre-programmed “
Ahmed, N., Deffley, R., Kundys, B., Morley, N.A.   +3 more
openaire   +3 more sources

Additively manufactured 17–4 PH stainless steels for fracture management devices

Virtual and Physical Prototyping
Stainless steel 316L (SS316L) is widely used in fracture management devices. However, SS316L does not offer any bacterial infection resistance and can cause metal-ion sensitivity due to Ni-ions’ presence.
Aruntapan Dash, Susmita Bose, Amit Bandyopadhyay   +2 more
doaj   +4 more sources

Production and aging of highly porous 17-4 PH stainless steel

Journal of Porous Materials, 2011
This study describes production of highly porous 17-4 PH stainless steel for biomedical implant applications by space holder-sintering technique. 17-4 PH stainless steel powders were mixed with space holder and then compacted. For designing pore properties, both spherical and irregular shaped carbamide with different particle size ranges were used as ...
Mutlu, Ilven, Oktay, Enver
openaire   +2 more sources