Results 91 to 100 of about 3,068,204 (197)
Infrared Brazing of Ti-6Al-4V and 17-4PH Stainless Steel coated by Cr/Ni thin film.
, 2007 本研究分別使用銀基填料BAg-8、Ag-Cu-1.75Ti，和鈦基填料Ti-20Zr-20Cu-20Ni，對Ti-6Al-4V合金及具有不同表面鍍層之17-4PH不鏽鋼進行紅外線硬銲接合，期望藉由鍍層做為擴散阻隔層，阻擋填料與基材間的交互擴散以避免硬脆之介金屬相形成，得到最佳的剪力強度。實驗結果顯示，使用BAg-8填料與表面鍍鉻及鍍鎳之17-4PH不鏽鋼之接點可得到最佳的剪力強度；而使用Ag-Cu-1.75Ti填料與表面鍍鉻者剪力強度較前者低，但仍不錯。比較其顯微組織，發現均破斷於具脆性之Ti ...
吳居郇, Wu, Chu-Hsun
core
Plasma electrolyte produce 17-4PH powder for use in 3D MicroPrint technology [PDF]
, 2018 © Published under licence by IOP Publishing Ltd. The work is devoted to the investigation of the processes of obtaining fine powders from steel 17-4PH, for the purpose of their further application in 3D MicroPrint technology. This technology is a type of
Kashapov R., Kashapov N., Kashapov L.
core
Effect of ECAP on the Microstructure and Mechanical Properties of 17-4PH Stainless Steel
, 2010 Experiments were conducted to evaluate the influence of equal-channel angular pressing (ECAP) on the microstructure and mechanical properties of 17-4PH steel.
Gang Yang, Feng Shi Yin
core +1 more source
Effect of homogenization on precipitation behavior and strengthening of 17-4PH stainless steel fabricated using laser powder bed fusion [PDF]
, 2021 Effective post-heat treatment is critical to achieve desired microstructure for high-performance in additively manufactured (AM) components. In this work, the influence of homogenization on microstructure-property relationship in 17-4PH steels has been ...
Li, Kun +3 more
core
Gazi Üniversitesi Fen Bilimleri DergisiThe study focused on the production of bimetallic material from 17-4 stainless steel and D2 tool steel using the Markforged brand Metal X device. In particular, despite the different physical and mechanical properties of the materials used, studies were ...
Ufuk Taşcı
doaj +1 more source
, 2017 The valve stem used in the main steam system of nuclear power plant is usually 17-4PH martensitic stainless steel. When it served in 300 C° for a long time, the thermal aging embrittlement of valve stem will be significant, with the performance of the ...
Changyi Zhang +4 more
core +1 more source
Applied SciencesAn experimental campaign based on multiaxial tests is carried out to characterize the ductile behavior of 17-4PH steel and a Ti6Al4V titanium alloy, and to calibrate numerical ductile damage models, accordingly. This study aimed to identify a minimal set
Gabriele Cortis, Luca Cortese
doaj +1 more source
Comparative Study of Conventional And Minimum Quantity Lubrication During Machining 17-4PH Stainless Steel [PDF]
, 2015 Machining of different material with the conventional water soluble cutting oils have some challenges because of poor machinability characteristics. Many technology have been developed but minimum quantity lubrication (MQL) is the most frequent as it has
Hati, Dinesh Prasad
core
Scientific Reports17-4PH stainless steel is widely used in hydraulic components exposed to cavitation, yet its cavitation erosion resistance (CER) depends strongly on both the manufacturing route and the applied post-processing.
Aleksander Świetlicki +3 more
doaj +1 more source
Coupled Heat Transfer Analysis of Hypersonic Wide-Speed-Range Cruise Aircraft
AerospaceHypersonic aircraft represent a cutting-edge technology in aerospace engineering. Coupled heat transfer is a critical physical phenomenon in such aircraft. However, existing studies face challenges in predicting aerothermal behavior.
Shuailong Gao +4 more
doaj +1 more source