Results 131 to 140 of about 2,820,689 (381)

Profilometry‐Based Indentation Plastometry Testing of Tungsten at High Temperature

Advanced Engineering Materials, EarlyView.
Profilometry‐based indentation plastometry (PIP) allows extraction of stress‐strain curves from indent profiles. Tungsten is of industrial interest but is brittle at room temperature. It does plastically deform at higher temperatures. Excellent agreement is obtained between the two techniques in this regime, but PIP also gives plasticity ...
James Rees Miller, Philip John McKeown, Hillary Qiu, Trevor William Clyne   +3 more
wiley   +1 more source

Thermokinetic Modeling Approach for Aluminide Diffusion Coatings on Molybdenum Substrates

Advanced Engineering Materials, EarlyView.
The advancement of innovative materials for protective coatings in high‐temperature environments relies on a detailed understanding of diffusion processes within these systems. This article presents findings from modeling approaches, supporting the development and optimization of coating materials by focusing on the prediction of diffusion‐driven ...
Jurica Filipovic, Katharina Beck, Christian Kontermann, Mathias Galetz, Matthias Oechsner   +4 more
wiley   +1 more source

Influence of a Standard Heat Treatment on the Microstructure and Properties of Inconel X‐750 Produced by Laser Powder Bed Fusion

Advanced Engineering Materials, EarlyView.
Ni‐base superalloys produced using additive manufacturing (AM) have a different response to heat treatments when compared to their conventional counterparts. Due to such unpredictability, various alloys with industrial interest are currently overlooked in most prior AM research.
Guilherme Maziero Volpato, Adriano de Souza Pinto Pereira, Steffen Neumeier, Dachamir Hotza, Mathias Göken, Ulrich Tetzlaff, Márcio Celso Fredel   +6 more
wiley   +1 more source

The Performance of Mangrove (Rhizophora apiculata) Leaf Extract to Treat Vibriosis (Vibrio harveyi) in Mud Crab (Scylla serrata) [PDF]

, 2017
Mud crabs (Scylla serrata) is one of the most economic crabs in Central Java. However, mortality was reached 80% during fattening due to bacterial infection.
A Mega, Putri, Sarjito, Sarjito, Slamet Budi, Prayitno   +2 more
core  

A Simulative Approach for the Prediction of Mesoscale Residual Stress Fields in Solution‐Strengthened Ferritic Ductile Iron

Advanced Engineering Materials, EarlyView.
This study presents a 3D representative volume element‐based simulation approach to predict mesoscopic residual stress and strain fields in silicon solid solution‐strengthened ductile cast iron. By modeling phase transformation kinetics with an enhanced Johnson–Mehl–Avrami–Kolmogorov model, the effects of varying cooling rates on residual stresses are ...
Lutz Horbach, Oliver Schenk, Valérian Iss, Ali Rajaei, Jiali Zhang, Felix Weber, Christoph Broeckmann   +6 more
wiley   +1 more source

Mechanical Behavior and Microstructural Changes Associated with Tensile Deformation above the Martensite Start Temperature during Quenching and Subsequent Partitioning of a Low‐Alloy 37SiB6 Steel

Advanced Engineering Materials, EarlyView.
A new experimental setup, incorporating digital image correlation and infrared thermography in combination with inductive‐conductive heating for precise temperature control, is used to analyze the mechanical behavior and microstructural changes of sheet metal under complex thermomechanical test conditions that represent quench and partitioning ...
Christian Illgen, Benjamin Bohne, Sven Winter, Marcus Böhme, Martin F.-X. Wagner   +4 more
wiley   +1 more source

Control of interface reactions in SIC/TI composites [PDF]

The reaction between a 0.5 to 1.0 Al film and a thick Ti substrate to form TiAl3 occurs very rapidly on heating to 635 C and causes the Al to be confined to the surface region.
Houska, C. R., Rao, V.
core   +1 more source

Residual Stress States in Microstructurally Graded PBF–LB/M Austenitic Steel Components

Advanced Engineering Materials, EarlyView.
This study examines microstructurally graded 316L rectangular tube profiles fabricated via PBF–LB/M using a dual‐laser system. A 1 kW top‐hat and a 400 W Gaussian laser create distinct grain sizes and crystallographic texture. Mechanical properties are linked to microstructural evolution driven by processing conditions.
Nico Möller, Florian Loebich, Thomas Wegener, Julia Richter, Jens Gibmeier, Thomas Niendorf   +5 more
wiley   +1 more source

Self-lubricating plasma-sprayed composites for sliding contact bearings to 900 C [PDF]

Plasma-sprayed composites which have good oxidation-resistance and self-lubricating characteristics to 900 C were developed. The composites are a Nichrome matrix containing dispersed glass for oxidation protection and calcium fluoride for lubrication ...
Sliney, H. E.
core   +1 more source

CALPHAD‐Guided Prediction and Interpretation of Phase Formation in Ta–Mo–Cr–Ti–Al Refractory High‐Entropy Alloys

Advanced Engineering Materials, EarlyView.
This study designs Ta–Mo–Cr–Ti–Al refractory high‐entropy alloys with a disordered body‐centered‐cubic A2 crystal structure aiming for improved ductility, lower density, and oxidation resistance. Four alloy compositions are identified by thermodynamic calculations.
Kateryna Khanchych, Chongchong Tang, Carsten Schroer, Björn Schäfer, Judith Jung, Michael Dürrschnabel, Ute Jäntsch, Bronislava Gorr   +7 more
wiley   +1 more source