Results 71 to 80 of about 7,846 (217)
Acrylonitrile–butadiene rubber/reclaimed rubber—nylon fiber composite
Advances in Polymer Technology, 2001 AbstractThe effect of diphenylmethane diisocyanate (MDI)–polyethyleneglycol (PEG) resin on the cure characteristics and mechanical properties of nitrile rubber/whole tyre reclaim—short nylon fiber composite—was studied. At a constant loading of 5 phr, the resin composition was varied.
T. D. Sreeja, S. K. N. Kutty
openaire +1 more source
Polymer International, EarlyView.Fullerene particles were incorporated with CF‐reinforced acrylonitrile–butadiene–styrene terpolymer (ABS) matrix at three different compositions by a melt‐compounding process. These insights are crucial for the optimization of conductive hybrid composites for various applications.
Alinda Öyku Akar +4 more
wiley +1 more source
Preparação, caracterização, propriedades mecânicas e térmicas de sistemas EPDM/CAULIM e EPDM/NANOCAULIM [PDF]
, 2013 Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Ciência e Engenharia de Materiais, Florianópolis, 2013Borrachas representam uma das principais matérias primas disponíveis no mercado, sendo que ...
Cercená, Rodrigo
core
, 2013 Acrylonitrile-butadiene rubber elastomers are widely used in seal and tire industries. Physiochemical, surface and tribological properties of acrylonitrile-butadiene rubber exposed to a lubricant in a sealed mechanical contact may gradually change, in ...
Prakash, B. +7 more
core +1 more source
Electrospun conducting polymers: recent trends and the transition towards a sustainable future
Polymer International, EarlyView.This review discusses the electrospinning of conducting polymers, detailing procedures, fibrous morphologies, improved properties, applications in electronics, and challenges, while outlining future directions for nanofibre‐based devices in various fields.
Xenofon Karagiorgis +3 more
wiley +1 more source
The effect of gamma radiation on the ageing of sulfur cured nr/csm and nbr/csm rubber blends reinforced by carbon black [PDF]
Chemical Industry and Chemical Engineering Quarterly, 2009 In this work the effect of the γ-radiation dose on ageing of carbon black reinforced elastomeric materials was studied. The compounds based on natural rubber/chlorosulfonated rubber blend (NR/CSM) and butadiene acrylonitrile rubber/chlorosulfonated ...
Gordana Marković +4 more
doaj
Quantification by FT-IR (UATR/NIRA) of NBR/SBR blends
Polímeros, 2018 Rubber blends are important materials in automotive industry, as well as in other sectors. However, there are implications when suitable use of a polymer in an artifact is not made. In the automotive area, for example, the use of an elastomer without the
Joyce Baracho Azevedo +5 more
doaj +1 more source
Polymer International, EarlyView.The 100% recycling of optimal polycarbonate/acrylonitrile–butadiene–styrene/poly(methyl methacrylate) (PC/ABS/PMMA) blends, identified through the mixture design, over multiple successive cycles provides valuable insights into their life cycle. Subsequently, chemical, rheological, thermal and mechanical characterizations will be carried out to evaluate
Rahma Ezzeddine +3 more
wiley +1 more source
Reinforcement of Acrylonitrile—Butadiene Rubber by Silica Generated in situ
, 1998 In situ silica reinforcement was applied to the acrylonitrile—butadiene rubber (NBR) vulcanizates. The amount of in situ silica introduced in the NBR vulcanizates was limited due to the high polarity of NBR.
S. Osanai +5 more
core +1 more source
Natural rubber to replace acrylonitrile butadiene styrene in polycarbonate blends and composites
Engineering and Applied Science Research, 2021 In the challenging prospect of developing “green” materials, the present research studied the possibility to replace acrylonitrile butadiene styrene (ABS) which is a petroleum based, synthetic rubber in polycarbonate (PC) blends with ...
Patiparn Boonruam +4 more
doaj