Results 21 to 30 of about 2,096 (127)

Comparing the Applicability of State‐Of‐The‐Art Photopolymer Injection Molds Printed by Multi‐Material Jetting and High‐Performance Digital Light Processing

Polymer Engineering &Science, EarlyView.
The workflow of comparing state‐of‐the‐art photopolymers in rapid tooling. ABSTRACT Additive manufacturing (AM) introduced the concept of layer‐by‐layer manufacturing, which allows the fast and direct production of parts. Additive technologies are also hybridized with conventional polymer processing technologies.
Szabolcs Krizsma, András Suplicz
wiley   +1 more source

Reinforcement and Rheology of Epoxy‐Mediated Lignin Integration in Carboxylated Nitrile Rubber

Polymer Engineering &Science, EarlyView.
The interaction of lignin‐epoxy resin‐XNBR and the effect of lignin on the nonlinear rheological behavior of epoxy‐cured XNBR/lignin composites. ABSTRACT Lignin has attracted increasing interest as a renewable filler for rubber composites; however, it shows weaker reinforcing efficiency than conventional fillers such as carbon black and silica ...
Onur Nuri Arslan, Chaoying Wan
wiley   +1 more source

Performance improvement of carbon fiber‐reinforced ABS composites by introducing fullerene nanoparticles

Polymer International, EarlyView.
Fullerene particles were incorporated with CF‐reinforced acrylonitrile–butadiene–styrene terpolymer (ABS) matrix at three different compositions by a melt‐compounding process. These insights are crucial for the optimization of conductive hybrid composites for various applications.
Alinda Öyku Akar, Ümit Hakan Yıldız, Seha Tirkeş, Ümit Tayfun, Ferda Hacivelioglu   +4 more
wiley   +1 more source

Electrospun conducting polymers: recent trends and the transition towards a sustainable future

Polymer International, EarlyView.
This review discusses the electrospinning of conducting polymers, detailing procedures, fibrous morphologies, improved properties, applications in electronics, and challenges, while outlining future directions for nanofibre‐based devices in various fields.
Xenofon Karagiorgis, Sofia Sandhu, Peter J. Skabara, Ravinder Dahiya   +3 more
wiley   +1 more source

Effect of recycling on mechanical and physical properties of polycarbonate/acrylonitrile–butadiene–styrene/poly(methyl methacrylate) (PC/ABS/PMMA) blends

Polymer International, EarlyView.
The 100% recycling of optimal polycarbonate/acrylonitrile–butadiene–styrene/poly(methyl methacrylate) (PC/ABS/PMMA) blends, identified through the mixture design, over multiple successive cycles provides valuable insights into their life cycle. Subsequently, chemical, rheological, thermal and mechanical characterizations will be carried out to evaluate
Rahma Ezzeddine, Karama Elfehri, Ángel Marcos‐Fernández, Basma Samet   +3 more
wiley   +1 more source

Actuation Strategies for Underwater Jet‐Propelled Soft Robots

Journal of Field Robotics, EarlyView.
ABSTRACT This review article examines jet‐propulsion mechanisms in underwater soft robotic systems, focusing exclusively on physically fabricated and experimentally validated robots. Covering research published from 2013 to 2025, this study classifies and evaluates jet‐propulsion robots based on their actuation mechanisms.
Angel Kitone, Mohammed Anteet, Pawandeep S. Matharu, Yara Almubarak   +3 more
wiley   +1 more source

Study of the Thermal and Hydrothermal Aging Effects on the Properties of 3D‐Printed Thermoplastic Polyurethane

Journal of Vinyl and Additive Technology, EarlyView.
Effect of post‐aging conditions on mechanical and thermal properties of FDM‐printed parts. ABSTRACT In this study, the thermal and hydrothermal aging of TPU produced with the FDM technique was simulated and subjected to a series of tests. The alterations in the internal structures of the samples that had been subjected to tensile, hardness, adhesive ...
Busra Eyri, Okan Gul, N. Gamze Karsli, Taner Yilmaz   +3 more
wiley   +1 more source

Clinical application of additive manufacturing in maxillofacial prosthetics: A scoping review

Journal of Prosthodontics, EarlyView.
Abstract Purpose Digital workflows provide significant advances in prosthodontics, especially in terms of accuracy, reduced treatment duration, and quality of life. Moreover, additive manufacturing (AM) is particularly adapted for the fabrication of personalized complex prototypes required for the prosthetic rehabilitation of maxillofacial defects ...
Hélène Magro, Adrien Laran, Adrien Naveau   +2 more
wiley   +1 more source

Selective Oxidation of Primary Amines to Nitriles Catalyzed by the Ru‐Doped Hexagonal Perovskite SrMnO3

Advanced Synthesis &Catalysis, Volume 368, Issue 11, 3 June 2026.
The selective oxidation of primary amines to generate nitriles provides a cost‐effective and atom‐economical synthetic approach that avoids the formation of harmful byproducts. However, achieving high yields under mild conditions remains challenging, due to the difficulty in efficiently activating the α‐CH bonds of amines and the multiple competing ...
Tsukino Ishizaki, Keiju Wachi, Keigo Kamata   +2 more
wiley   +1 more source

Effect of a Natural Processing Aid on the Properties of Acrylonitrile-Butadiene Rubber: Study on Soybean Oil Fatty Acid from Seed Crop. [PDF]

Polymers (Basel), 2021
Nun-Anan P, Hayichelaeh C, Boonkerd K.
europepmc   +1 more source