Results 51 to 60 of about 4,166,395 (197)

Punching strength of actual two-way slabs

open access: yes, 2014
Many building codes rely on empirical formulations with respect to the punching shear design provisions. Such empirical equations are typically calibrated on the basis of laboratory tests performed on simplified geometries (usually isolated specimens) with usually statically-determined loading conditions.
Muttoni, Aurelio   +2 more
openaire   +1 more source

Predicting Actual Strength of Shear Reinforcement Using Effective Stirrup Concept [PDF]

open access: yesJournal of the Korea Concrete Institute, 2008
This paper presents the prediction of the actual strength of shear reinforcement on the basis of the concept of effective stirrups. The prediction method incorporating the shear cracking angle was proposed with the estimation by the Modified Compression Field Theory (MCFT).
openaire   +1 more source

Experimental Study of the Effect of High Temperature on the Mechanical Properties of Coarse Sandstone

open access: yesApplied Sciences, 2019
In order to study the effect of high temperature on the mechanical properties of rock, two groups of coarse sandstone samples were subjected to the uniaxial compression and triaxial compression test at room temperature of 25 °C and high temperatures
Sijiang Wei   +4 more
doaj   +1 more source

Corrosion Morphology Simplification Effect on Residual Strength of Completion String

open access: yesShiyou jixie, 2016
Consideration the serious corrosion of well completion string in "three ultra" gas wells in west China, aiming at pitting string, three simplified pitting models of ellipsoid, sweep and actual have been established.Numerical simulations have been ...
Fan Heng   +4 more
doaj  

Assessment Method for Early Fatigue Failure of Crankshaft Based on Dispersion of Impact Energy

open access: yesShanghai Jiaotong Daxue xuebao
Considering scattering behaviors of strength and fatigue life characteristics of actual materials, a method for evaluating the early fatigue failure of crankshafts has been proposed. The micro-mechanism of the scatter of strength and life characteristics
LI Xiangzhe, LIANG Gang, ZHENG Xiaomei, XU Congcong, XU Jinquan
doaj   +1 more source

Strengths Enhancement Training: Self-Concept And Self-Actualization

open access: yes, 1976
The strengths enhancement training program was developed and evaluated in order to determine empirically if a group method designed specific ally to assist subjects in the identification of personal strengths, resources, and potentials, would be effective in broadening their perceptions of themselves in a positive direction.
openaire   +2 more sources

Productive Practice of Hot-Rolled Φ6 ~ 40 mm HRB500E  Reinforcing Steel

open access: yesTeshugang, 2019
According to GB/T 1499. 2-2018 standard, the internal controlled composition of Φ36 - 40 mm HRB500E rebar is designed as (% ) 0.22 ~0.25C,0.60 ~0.70Si, 1.50 ~ 1.60Mn, 0.11 ~0.13V,P≤ 0.045 ,S≤ 0.045 in shuigang.
王琳松   +5 more
doaj  

Strength studies of concrete on an actual job and of the corresponding control cubes

open access: yes, 1968
The present studies of control cubes for a comparatively large concrete construction, and of corresponding sample cores, were carried out in order to determine the difference in the magnitude and scatter of the compressive strength.
Henzel, J.   +2 more
openaire   +1 more source

Ópera actual: Ópera actual - Año XI Número 59 - 2003 abril (01/04/2003)

open access: yes, 2003
Copia digital. España : Ministerio de Cultura y Deporte.

core   +1 more source

Home - About - Disclaimer - Privacy