Results 11 to 20 of about 771 (231)
Additive Friction Stir Deposition of a Tantalum–Tungsten Refractory Alloy
Journal of Manufacturing and Materials ProcessingAdditive friction stir deposition (AFSD) is a solid-state metal additive manufacturing technique, which utilizes frictional heating and plastic deformation to create large deposits and parts.
R. Joey Griffiths +5 more
doaj +3 more sources
Materials & DesignFriction stir-based solid-state layer deposition techniques show considerable potential as additive manufacturing approach but also for repair applications.
Zina Kallien +7 more
doaj +5 more sources
The Applicability of Die Cast A356 Alloy to Additive Friction Stir Deposition at Various Feeding Speeds [PDF]
Materials, 2021 In the current investigation, additive friction stir-deposition (AFS-D) of as-cast hypoeutectic A356 Al alloy was conducted. The effect of feeding speeds of 3, 4, and 5 mm/min at a constant rotational speed of 1200 rpm on the macrostructure ...
Bandar Alzahrani +2 more
exaly +3 more sources
Additive Manufacturing LettersAdditive manufacturing (AM) using additive friction stir deposition (AFSD) offers unique advantages over traditional liquid-solid state transitions, notably the ability to plasticise materials through frictional and deformation heat and build a bulk ...
Lu Jiang +5 more
doaj +4 more sources
Microstructure Evolution of Al6061 Alloy Made by Additive Friction Stir Deposition. [PDF]
Materials (Basel), 2022 In this paper, the phase structure, composition distribution, grain morphology, and hardness of Al6061 alloy samples made with additive friction stir deposition (AFS-D) were examined. A nearly symmetrical layer-by-layer structure was observed in the cross section (vertical with respect to the fabrication-tool traversing direction) of the as-deposited ...
Zeng C +6 more
europepmc +4 more sources
Research progress of metal solid phase additive manufacturing based on friction stir
Cailiao gongcheng, 2022 Solid phase additive manufacturing based on friction stir is a new technology for manufacturing of large lightweight alloy components, which has become one of the hot research topics in advanced manufacturing field at home and abroad.The research status ...
SHI Lei +4 more
doaj +2 more sources
Research progress in additive friction stir deposition
Cailiao gongcheng, 2023 The additive friction stir deposition (AFSD) technology is a new solid-state additive manufacturing technology. The metal bars, powders, and wires are used as feedstock.
CHEN Gang +5 more
doaj +2 more sources
Towards underwater additive manufacturing via additive friction stir deposition
Materials & Design, 2022 Given the challenges in feed material supply and quality control, metal additive manufacturing has rarely been implemented in austere environments, especially underwater.
R. Joey Griffiths +4 more
doaj +2 more sources
Optical image and Vickers hardness dataset for repair of 1080 steel using additive friction stir deposition of Aermet 100 [PDF]
Data in Brief, 2022 This article presents optical images, measurements of heat affected zone depths, and peak Vickers hardness values from the heat affected zone regions of a 1080 steel plate substrate with a machined groove “flaw” repaired using additive friction stir ...
Kathleen Chou +4 more
doaj +2 more sources
Applied Sciences, 2019 The repair of high strength, high performance 7075 aluminum alloy is essential for a broad range of aerospace and defense applications. However, it is challenging to implement it using traditional fusion welding-based approaches, owing to hot cracking ...
R. Joey Griffiths +3 more
doaj +2 more sources