Results 191 to 200 of about 116,502 (248)
Some of the next articles are maybe not open access.
Liquid Phase Sintering of AISI 316L Stainless Steel
Powder Metallurgy, 1989The sintering behaviour of AISI 316L powders alloyed with 20%Cu has been studied as a function of various sintering parameters. Copper additions are known to improve compressibility, sinterability, and dimensional control of the final component, as well as improving the corrosion resistance of the sintered material.
TIZIANI A +4 more
openaire +2 more sources
Investigation of Liquid Metal Embrittlement of AISI 316L Steels
Volume 5: Student Paper Competition, 2016To support the feasibility and the deployment of LFRs one of the main issues to be solved is the reliability of structural materials to be exposed to liquid metal coolant. Particularly the Liquid Metal Embrittlement (LME) of steels is of interest for nuclear reactors and spallation sources projects because structural materials for these ...
Stefanini, L. +2 more
openaire +2 more sources
Nano- and Micromechanical Parameters of AISI 316L Steel
Surface Engineering and Applied Electrochemistry, 2020The nano- and micro-indentation mechanical parameters of the AISI 316L stainless steel, such as nanohardness (НNI), microhardness (HMI), the Young modulus (E), the indices of plasticity (H/E) and resistance (H3/E2), and relaxation parameters hs, hres, he-p and their dependences on the value of P load applied to an indenter were studied.
D. Grabco +8 more
openaire +1 more source
, 2021
In this paper, significant results about the evaluation of the influence of wear test factors such as load, distance, and sliding speed are analyzed to determine the statistical behavior of the specific wear rate, depth, and friction coefficient as ...
R. A. García-León +6 more
semanticscholar +1 more source
In this paper, significant results about the evaluation of the influence of wear test factors such as load, distance, and sliding speed are analyzed to determine the statistical behavior of the specific wear rate, depth, and friction coefficient as ...
R. A. García-León +6 more
semanticscholar +1 more source
Materialia, 2021
Alloys manufactured by laser powder-bed fusion have intrinsic and hierarchical microstructural features inherited from the fast solidification (up to 104 K/s) and subsequent thermal cycles.
L. S. Aota +6 more
semanticscholar +1 more source
Alloys manufactured by laser powder-bed fusion have intrinsic and hierarchical microstructural features inherited from the fast solidification (up to 104 K/s) and subsequent thermal cycles.
L. S. Aota +6 more
semanticscholar +1 more source
Surface and Coatings Technology, 1993
Abstract High load Vickers indentation, scratch testing under constant and progressive loading as well as pin-on-disc wear testing were used to assess the overall strength of coated specimens. In scratch testing, the major damage mechanism was found to be brittle, by thickness cracking of the coating with growth defects the dominant crack intiators ...
A. Darbeïda +3 more
openaire +1 more source
Abstract High load Vickers indentation, scratch testing under constant and progressive loading as well as pin-on-disc wear testing were used to assess the overall strength of coated specimens. In scratch testing, the major damage mechanism was found to be brittle, by thickness cracking of the coating with growth defects the dominant crack intiators ...
A. Darbeïda +3 more
openaire +1 more source
Microstructural Fractal Dimension of AISI 316L Steel
MRS Proceedings, 1994AbstractFractal dimension of the microstructure of AISI 316L steel (17 Cr, 12.7 Ni, 2.1 Mo, 1. 5 Mn, 0.01 C) with different degrees of strain were obtained from Richardson plots of grain boundary perimeter against magnification. Grain boundaries were revealed using conventional metallographic techniques and measurements were taken with the aid of an ...
M. Hinojosa, R. Rodréguez, U. Ortiz
openaire +1 more source
Wear maps of borided AISI 316L steel under ball-on-flat dry sliding conditions
, 2021New results on wear maps of borided AISI 316L steel, obtained by powder-pack boriding process, are presented to provide a general visualization of its wear performance under different dry sliding conditions.
R. A. García-León +4 more
semanticscholar +1 more source
Metallography, Microstructure, and Analysis, 2021
The mechanical properties and microstructures of dissimilar arc stud weldments of AISI 316L/AISI 1020 and AISI 304/AISI 1020 were investigated. Welding currents of 400, 600 and 800A and welding times of 0.2, 0.25, 0.3, 0.35, 0.4 and 0.45 second were employed.
Mohammed H. Abass +4 more
openaire +1 more source
The mechanical properties and microstructures of dissimilar arc stud weldments of AISI 316L/AISI 1020 and AISI 304/AISI 1020 were investigated. Welding currents of 400, 600 and 800A and welding times of 0.2, 0.25, 0.3, 0.35, 0.4 and 0.45 second were employed.
Mohammed H. Abass +4 more
openaire +1 more source
Strength of AISI 316L in torsion at high temperature
Materials Science and Engineering: A, 2008Hot torsion flow behaviour of 30 mu m grained AISI 316L stainless steel was investigated in the range of temperatures 850-1100 degrees C with equivalent strain rates 0.0001-0.006s(-1). For temperatures higher than 900 degrees C the material presented an unusual linear relationship at low strains between equivalent stress, sigma(Eq), and equivalent ...
GANGELLA, BPWYNNE, WMRAINFORTH, JHBEYNON
openaire +2 more sources