Results 121 to 130 of about 95,714 (324)
Advanced Engineering Materials, EarlyView.This study designs Ta–Mo–Cr–Ti–Al refractory high‐entropy alloys with a disordered body‐centered‐cubic A2 crystal structure aiming for improved ductility, lower density, and oxidation resistance. Four alloy compositions are identified by thermodynamic calculations.
Kateryna Khanchych +7 more
wiley +1 more source
Volt-ampere characteristics of cylindrical and spherical Langmuir probes for various potential models Scientific report [PDF]
Volt-ampere characteristics of cylindrical and spherical Langmuir probes for various potential ...
Dow, W. G., Fontheim, E. G., Kanal, M.
core +1 more source
Advanced Engineering Materials, EarlyView.This work reveals the phase composition and quantitative morphology analysis of precipitation‐hardened Fe32Cu12Ni11Ti16Al29 complex‐concentrated alloy. The precipitates are shown to have a high coherency. Morphology transition between sphere, cuboidal, and elongated morphology is observed. Finally, the overaging behavior is captured using microhardness.
Rostyslav Nizinkovskyi +4 more
wiley +1 more source
High VoltageMetal oxide varistors (MOVs) are extensively employed in DC circuit breakers (DCCBs) to suppress overvoltage, dissipate energy and build up voltage after interruption.
Chen Long +5 more
doaj +1 more source
Evaluation program for secondary spacecraft cells - General performance test of General Electric 6.0 ampere-hour nickel cadmium secondary spacecraft cells [PDF]
Environmental and performance tests of 6.0 ampere- hour sealed nickel cadmium secondary spacecraft ...
core +1 more source
Advanced Engineering Materials, EarlyView.A laboratory‐scale procedure is developed to evaluate the efficiency of melt‐cleaning and drossing fluxes during aluminium alloy recycling, studying their effects on melt cleanliness and tensile properties of secondary foundry alloys. This work provides a practical tool for foundries and aluminium refiners to assess the efficiency of salt fluxes in ...
Veronica Milani, Giulio Timelli
wiley +1 more source
Wing-slope techniques for the analysis of Langmuir probe characteristics [PDF]
Wing-slope positive ion temperature measurement technique for Langmuir probe volt-ampere characteristic ...
Bettinger, R. T.
core +1 more source
Magnetoactive Metamaterials: A State‐of‐the‐Art Review
Advanced Engineering Materials, EarlyView.Magnetoactive metamaterials combine magnetoactive composites with architected metastructures to enable contactless, tunable control of mechanical, acoustic, and elastic properties. This review highlights recent advances in their design, fabrication, and applications in soft robotics, biomedical devices, and adaptive structures and outlines future ...
Seyyedmohammad Aghamiri, Ramin Sedaghati
wiley +1 more source
Sensors and Actuators ReportsIn recent years, sweat, as a biological fluid, has become a reliable proxy for blood analyte concentration, and thanks to wearable devices, in vitro biochemical monitoring has been revolutionized to achieve minimally invasive or even non-invasive ...
Ruiyu Luo +3 more
doaj +1 more source
Voltammetric screening of electrodes in fused salt electrolytes [PDF]
Measuring conductivity, freezing point, and volt-ampere characteristics of halide melts for battery ...
Mc Collum, W. A., Jr. +2 more
core +1 more source