Results 1 to 10 of about 40,868 (277)

Investigation of the effects of the magnetic field on the anodic dissolution of alloy 690 in SO42− + SCN− solution using digital holography [PDF]

open access: yesHeliyon, 2023
Digital holography has been employed for in situ observation of dynamic processes occurring at the electrode|electrolyte interface during the anodic dissolution of Alloy 690 in solutions containing SO42− + SCN− with or without magnetic field (MF). It was
Dongling Xu   +3 more
doaj   +2 more sources

Investigation of anodic dissolution and surface passivation of high-grade nickel matte in sulfuric acid solution

open access: yesJCIS Open, 2021
The anodic dissolution of the high-grade nickel matte in the sulfuric acid solution was investigated at the dynamic potential and potentiostatic polarizations, and the solid products on the surface of the matte at various polarized potentials were ...
Chuncheng Zhu   +6 more
doaj   +1 more source

Effect of Copper Ion and Water on Anodic Dissolution of Metallic Copper in a Deep Eutectic Solvent (DES)

open access: yesElectrochemistry, 2021
This report presents influence of water and copper salt on the anodic dissolution of metallic copper in a eutectic solvent of choline chloride and ethylene glycol (DES) in a 1 : 2 molar ratio.
Wrya O. KARIM   +5 more
doaj   +1 more source

The anodically polarized Mg surface products and accelerated hydrogen evolution

open access: yesJournal of Magnesium and Alloys, 2023
To clarify the anodic dissolution mechanism of Mg, the hydrogen evolution from pure Mg in acidic solutions under galvanostatic conditions were systematically measured. With increasing anodic current density, the cathodic hydrogen evolution rate decreased,
Jufeng Huang   +4 more
doaj   +1 more source

Kinetics of the zinc anodic dissolution reaction in near neutral EDTA solutions [PDF]

open access: yesJournal of the Serbian Chemical Society, 2003
Polarization curves of the anodic dissolution reaction of zinc were determined in EDTA solutions of different total molar concentrations (0.05 0.10, 0.15 and 0.20 mol dm-3), the pH values of which were systematically varied (pH 3.0 – 10.0).
Stanković Slavka   +3 more
doaj   +3 more sources

Stress corrosion cracking behavior of X80 steel under the combined effects of sulfide and cathodic potential

open access: yesJournal of Materials Research and Technology, 2023
Electrochemical corrosion and stress corrosion cracking (SCC) behavior of X80 steel in the sulfurated marine environment at open circuit potential and −850 mVSCE are investigated.
Xinyi Liu   +6 more
doaj   +1 more source

Hydrogen evolution, efficiency and exacerbated galvanic corrosion damage of magnesium alloy anode

open access: yesCailiao gongcheng, 2021
To address the galvanic corrosion issue that is critically limiting the practical application of Mg alloys, the negative difference effect (NDE), anodic dissolution efficiency, and anodic hydrogen evolution were investigated by means of the hydrogen ...
HUANG Ju-feng, SONG Guang-ling
doaj   +1 more source

Application of in situ digital holography to the study of the effect of a magnetic field on the anodic dissolution of iron in thichloroacetic acid [PDF]

open access: yesJournal of the Serbian Chemical Society, 2006
The effect of a magnetic field on the anodic dissolution of iron in 1.0 mol dm-3 trichloroacetic acid solution was studied by the potentiodynamic polarization method and in situ digital holography.
Yang Xuegeng   +3 more
doaj   +3 more sources

Mechano-Chemical Anodic Dissolution [PDF]

open access: yesNature, 1958
Hoar and Hines1–5 have studied the transgranular stress-corrosion cracking of 18–8 type stainless steels in aerated aqueous magnesium chloride solution (42 wt.-per cent of magnesium chloride) at temperatures of 120–154° C., using thin wires directly stressed in tension.
T. P. HOAR, J. M. WEST
openaire   +1 more source

High Rate Anodic Dissolution of Copper [PDF]

open access: yesJournal of The Electrochemical Society, 1969
The anodic dissolution of copper at current densities of 10–150 A/cm2 has been studied in neutral and solutions. An experimental flow system has been built which allows electrochemical measurements of the dissolution process to be performed under denned hydrodynamic conditions typical for the technical electrochemical machining operation.
Landolt, Dieter   +2 more
openaire   +2 more sources

Home - About - Disclaimer - Privacy