Results 41 to 50 of about 3,795,160 (345)
Results in Surfaces and InterfacesThis study investigates the influence of electrolyte temperature on the anodic oxidation products of nickel plates in potassium hydroxide (KOH) melts, specifically in sub-molten KOH electrolytes at 250 °C, 300 °C, and 350 °C, and in a molten KOH ...
Gökçe Evren +2 more
doaj +1 more source
MetalsThe anodic oxidation technique was used for surface modification, resulting in the creation of a titanium-based nanotube oxide layer on a coarse-grained and ultrafine-grained Ti-13Nb-13Zr alloy. The modified surface morphology was analyzed using scanning
Dragana R. Mihajlović +3 more
doaj +1 more source
Corrosion and Passivity of Copper in Basic Solutions of Acetate Ions
Chemical Engineering Transactions, 2014 The anodic oxidation of copper in sodium acetate aqueous solutions is studied in relation to the anodic films formed, in order to elucidate the role of acetates to the corrosion of copper. At open circuit conditions a cuprous oxide layer is formed having
A. Karantonis +3 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin +2 more
wiley +1 more source
, 2010 Plasma electrolytic oxidation, or PEO, is a surface modification process for the production of ceramic oxide coatings upon substrates of metals such as aluminium, magnesium and titanium.
core +1 more source
Influence of an Argon/Silane Atmosphere on the Temperature of a Thermal Plasma
Advanced Engineering Materials, EarlyView.The influence of a silane‐doped argon atmosphere on the chemical composition and temperature of a thermal nontransferring argon plasma is investigated using optical emission spectroscopy. As a result of the high amount of free electrons resulting from the stepwise ionization and dissociation of the silane molecule, even a silane addition of 0.01 vol ...
Lena Kreie +4 more
wiley +1 more source
Corrosion potential of 304 stainless steel in sulfuric acid [PDF]
Journal of the Serbian Chemical Society, 2006 The potentiodynamic study of the electrochemical behavior of austenitic 304 stainless steel in deaerated aqueous sulfuric acid of pH 1 revealed that the steel achieved a stable corrosion potential of ca.
Jegdić Bore +2 more
doaj +3 more sources
Effect of Oxygen Content on Surface and Subsurface Integrity During Turning of Ti–6Al–4V
Advanced Engineering Materials, EarlyView.This study examines how oxygen content in the ambient atmosphere affects the surface and subsurface properties of Ti–6Al–4V during turning. Results show that oxygen does not influence surface roughness. However, machining in an extremely high vacuum‐adequate atmosphere increases surface hardness by up to 7.8% and induces compressive residual stresses ...
Benjamin Bergmann +3 more
wiley +1 more source
Development Of Si02 Thin Film On singlecrystal Sic By anodic oxidation technique. [PDF]
, 2008 Anodic silicon dioxide (Si02) thin film is growth on p- and n-type silicon (Si) and p-type 4H-silicon carbide (SiC) substrate with the thickness ranging from 50-130 nm.
Cheong, Kuan Yew +2 more
core
Advanced Engineering Materials, EarlyView.A hierarchical porous copper current collector is fabricated via three‐dimensional printing combined with pressureless sintering to stabilize lithium metal anodes. The interconnected architecture lowers local current density, guides uniform Li deposition within pores, and suppresses dendrite growth.
Alok Kumar Mishra, Mukul Shukla
wiley +1 more source