Machine‐Learning‐Enabled Wood with Nanopump Functionalization for Solar Interfacial Evaporation
This study employed machine learning to design an iron‐cobalt‐carbon‐wood photothermal material, achieving high‐efficiency evaporation at 2.807 kg m−2 h−1 and excellent salt resistance. The integrated system increased the daily water production efficiency of solar distillation by 1.5 times, providing an innovative solution for sustainable seawater ...
Chaohai Wang +10 more
wiley +1 more source
The effect of different carbon reductants on the production of ferrosilicon 75% on an industrial scale in an electric arc furnace. [PDF]
Etemadi A, Koohestani H, Tajally M.
europepmc +1 more source
Charring Behaviour of Mass Timber: A Comparison of Thin Intumescent Coatings and Plasterboard
ABSTRACT This study compares the charring behaviour of mass timber under varied heating conditions when protected by either different thin intumescent coating types or fire‐rated plasterboard layers. Bench‐scale fire experiments were conducted using the Heat‐Transfer Rate Inducing System (H‐TRIS).
Stavros Spyridakis +4 more
wiley +1 more source
Multi-Parameter Characteristics of Electric Arc Furnace Melting. [PDF]
Moskal M, Migas P, Karbowniczek M.
europepmc +1 more source
Bend transition temperature of arc-cast molybdenum and molybdenum - 0.5-percent- titanium sheet in worked, recrystallized, and welded conditions [PDF]
Bend transition temperature of arc-cast worked, recrystallized, and welded molybdenum and molybdenum-titanium alloy ...
Sinclair, J. H.
core +1 more source
Effect of HBr on Explosion Limits of Stoichiometric Hydrogen‐oxygen Mixture
ABSTRACT This work, based on numerical simulations, discusses the effect of HBr as an inhibitor on the explosion limit of stoichiometric hydrogen‐oxygen gas mixture in a closed spherical vessel. The numerical simulation solves the complete governing equations for mass, momentum, species and energy.
Chunkan Yu, Peter Glarborg
wiley +1 more source
An energy optimization study of the electric arc furnace from the steelmaking process with hot metal charging. [PDF]
Irawan A +6 more
europepmc +1 more source
The effect of addition of 3 at.% of either Re or W on the oxidation performance of equimolar Ta–Mo–Cr–Ti–Al is investigated and found to be beneficial, at least temporarily. Additionally, the oxide (Ti,Ta)O2 has been identified and characterised as a main part of the oxide scale. ABSTRACT Presuming that doping of protective (Cr,Ta,Ti)O2 with cations of
Björn Schäfer +7 more
wiley +1 more source
Design and Performance Evaluation of Integrating the Waste Heat Recovery System (WHRS) for a Silicon Arc Furnace with Plasma Gasification for Medical Waste. [PDF]
Dong Y, Wei L, Wang S, Pan P, Chen H.
europepmc +1 more source
Arc Furnace Loads Voltage Stability
The use of the arc furnace and its influence on the power system is being studied. A set of models that allows for the evaluation of the electrical behavior during steady state is presented in this paper. The results are presented and used to validate them.
openaire +1 more source

