Results 101 to 110 of about 1,620,370 (293)
Gain Enchancement of Microstrip Leaky-Wave 1x3 Antenna with V-Slot
This study aims to improve the performance of a microstrip leaky-wave antenna by adding a 1x3 array configuration and a V-slot structure for WLAN applications in the 5.925 − 6.425 GHz, using an FR-4 substrate with a dielectric constant of 4.6 ...
MUHAMAD WAHYU IQBAL +2 more
doaj +1 more source
A Cavity-Backed Shorted Annular Patch (SAP) Array for Mid-Range V-Band Backhauling Applications
This paper presents a new improved gain array configuration well suited for mid-range V-band backhauling applications. The proposed solution is based on a cavity-backed shorted annular patch (SAP) antenna loaded with a parasitic patch element for gain ...
Emilio Arnieri +2 more
doaj +1 more source
Flexible XL-MIMO via Array Configuration Codebook: Codebook Design and Array Configuration Training
XL-MIMO emerges as a promising technology to achieve unprecedented enhancements in spectral efficiency and spatial resolution, via orders-of-magnitude increase in the antenna array size. However, the practical issues of high hardware cost and power consumption pose great challenges towards the cost-effective implementation of XL-MIMO.
Haiquan Lu +3 more
openaire +3 more sources
Recent Results from the Telescope Array Experiment
The Telescope Array Experiment (TA) is the northern hemisphere's largest detector of ultra-high-energy cosmic rays (UHECRs). Built to measure the UHECR chemical composition, arrival-direction anisotropy, and energy spectrum for $E > 1$~EeV, TA's ...
Telescope Array Collaboration +1 more
core +1 more source
Design of a Multistable Finger Prosthesis with Programmable Metamaterials
This research article shows the development of a multistable programmble metamaterial for the use as a finger prosthesis. The material was designed on different hierarchical levels where the influence of geometrical parameters and combination of mechanical elements was explored.
Franziska Wenz +5 more
wiley +1 more source
Fabrication Routes for Ionic Conducting Fiber Strain Sensors
Ionic conducting fiber strain sensors (ICFSs) offer compliant, textile‐integrable sensing. Thus far, the commercialization of ICFSs has been constrained by fiber fabrication routes. This review provides a fabrication‐centric analysis of ICFSs correlating processing strategies with material properties and scalability.
Leo John Kershaw +3 more
wiley +1 more source
Aerodynamic Performance and Coupling Gain Effect of Archimedes Spiral Wind Turbine Array
The Archimedes spiral wind turbine (ASWT), as a novel type of horizontal-axis wind turbine, is well suited for remote islands. To explore the aerodynamic performance and coupling gain effect of ASWT array, a three-dimensional numerical simulation was ...
Ke Song +3 more
doaj +1 more source
Investigating the Low‐Temperature Phase Stability of the Binary Ta–W System
Atomistic simulations show that the binary Ta–W system forms ordered intermetallic phases, B2‐TaW and D03‐TaW3, as 0 K ground states. Configurational entropy, however, lowers the free energy of the disordered bcc solid solution, which becomes the stable phase above about 400 K.
Klemens Lechner +7 more
wiley +1 more source
To address the ineffectiveness of single-base radar in suppressing adjoint main-lobe interference, an equivalent large-aperture array can be designed by deploying sparse auxiliary arrays to separate main-lobe interference from targets in the spatial ...
Kaifa ZHAO +3 more
doaj +1 more source
Effects of Mg on Microstructure and Solidification of a Hypereutectic Zn–8 wt.%Al Alloy
An appreciable set of results involving thermal data, microstructure, chemical composition, and microstructural growth laws is reported for ZnAlMg alloys. Such results demonstrate that ZnAlMg alloys have high potential for applications in automotive self‐lubricating components, batteries, and electrical systems.
Raí B. de Sousa +6 more
wiley +1 more source

