Results 1 to 10 of about 3,024 (160)
Characterization of Sulphoaluminate Cement-Asphalt Emulsion Mortar for Cement and Asphalt Mortar Repair [PDF]
Frontiers in Materials, 2020 A sulpho cement-asphalt emulsion mortar was developed for the repair of damaged cement asphalt emulsion mortar. Various sulfoaluminate/Portland cement and asphalt emulsion/cement mass ratios, as well as emulsion types, were studied with respect to the ...
Chao Yang +4 more
doaj +2 more sources
Asphalt-Cement Concretes with Reclaimed Asphalt Pavement and Rubber Powder from Recycled Tire. [PDF]
Materials (Basel), 2021 The goal of the work was to describe properties of asphalt-cement concrete (ACC) with reclaimed asphalt pavement (RAP), Portland cement, sand, and rubber powder (RP), as a material to base courses of road pavements. The mixtures were designed with the RAP in the amount of 75, 80, and 85% (m/m) and chosen cement-sand-rubber (CSR) mortar.
Kukiełka J, Bańkowski W, Mirski K.
europepmc +4 more sources
Assessment of Modified - Asphalt Cement Properties
Journal of Engineering, 2023 The Asphalt cement is produced as a by-product from the oil industry; the asphalt must practice further processing to control the percentage of its different ingredients so that it will be suitable for paving process.
Saad Issa Sarsam +1 more
doaj +2 more sources
Investigation of Cement-Emulsified Asphalt in Plastic Concrete
Advances in Materials Science and Engineering, 2018 The mechanical, mesodamage, and the microproperties of cement-emulsified asphalt concrete have been investigated by computed tomography (CT), scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TG) in this work ...
Xiaohu Yan +3 more
doaj +2 more sources
Effect of Hot Glue Additive on the Rheological Properties of Asphalt Cement and Mixtures Performance
ARO-The Scientific Journal of Koya University, 2023 In general, the physical and rheological properties of asphalt binder are directly affecting the resistance of asphalt mix to the permanent deformation (rutting), water damage, and thermal cracking.
Sheelan A. Ahmed
doaj +1 more source
Case Studies in Construction Materials, 2022 Semi-flexible pavement (SFP) mixture is a relatively new pavement material that combines the characteristics of the flexibility of asphalt mixtures and the rigidity of cement concrete.
Dayong Jiang +4 more
doaj +1 more source
Surface Free Energy for the Evaluation of Asphalt Binder Stripping
Journal of Engineering, 2023 Stripping is one of the major distresses within asphalt concrete pavements caused due to penetration of water within the interface of asphalt-aggregate matrix.
Saad Issa Sarsam +1 more
doaj +1 more source
Surface Cement Concrete with Reclaimed Asphalt
Materials, 2023 This research concerns the possibility of using reclaimed asphalt pavement as a substitute for conventional aggregate in cement concrete mixtures for roads and airfield applications. The advantages of using reclaimed asphalt pavement as a replacement for natural aggregates are presented.
Małgorzata Linek +2 more
openaire +2 more sources
Mechanical properties of asphalt concrete modified with carbon nanotubes (CNTs)
Case Studies in Construction Materials, 2022 Three different percentages of carbon nanotubes (CNTs) (0.1%, 0.5%, and 1% by mass of asphalt cement) were used to modify conventional asphalt cement (60/70) in this study.
Mohamed Samir Eisa +4 more
doaj +1 more source
INFLUENCE OF CEMENT AND ASPHALT EMULSION RATIOS ON CEMENT-ASPHALT EMULSION MORTAR
International Journal of GEOMATE, 2019 It is known that cement has been used as a stabilizing agent for the road pavement stabilization. However, it could cause an adverse effect of premature cracking on the road. Moreover, asphalt emulsion has been a famous agent for pavement stabilizing as well, even though it has revealed low deformation resistance.
G Li, Y Zhao, S.-S Pang, W Huang
+6 more sources