Results 201 to 210 of about 15,465 (246)
Some of the next articles are maybe not open access.
Construction Technologies and Architecture
Indonesia is a tropical country with high rainfall, which necessitates pavement with higher void content and good drainage conditions. The quality of road pavement depends on the materials used. One type of asphalt mixture with high void content and permeability but low stability is porous asphalt.
Meidia Refiyanni +4 more
openaire +1 more source
Indonesia is a tropical country with high rainfall, which necessitates pavement with higher void content and good drainage conditions. The quality of road pavement depends on the materials used. One type of asphalt mixture with high void content and permeability but low stability is porous asphalt.
Meidia Refiyanni +4 more
openaire +1 more source
Asphalt Content by Neutron Moderation
1969The neutron moderation method of asphalt content determination is investigated by evaluating the effects of temperature of the mix, mass specific gravity of the sample, asphalt source, penetration grade of the asphalt, aggregate composition and gradation, and asphalt content of the mixture on the response of an experimental asphalt content gauge ...
J. H. Steele, C. P. Fisher
openaire +1 more source
Influence of foaming water content on foam asphalt mixtures
Construction and Building Materials, 2015 Warm mix asphalt technology using foamed bitumen is being used widely despite the fact that high air void content and poor coating of large aggregate remain major drawbacks require enhancement.
Manfred N Partl
exaly +2 more sources
Mitigation Strategy Selection for Asphalt Mixtures with High Reclaimed Asphalt Pavement Content
Transportation Research Record: Journal of the Transportation Research Board, 2023Economics and sustainability goals have driven higher use of recycled asphalt materials (RAMs), such as reclaimed asphalt pavement (RAP) and recycled asphalt shingles, in the pavement industry. Owing to the brittle nature of aged binders found in RAMs, a mitigation strategy is usually needed to ensure adequate cracking performance.
Aaron Leavitt +2 more
openaire +1 more source
Performance Evaluation of Asphalt Mixtures with High Recycled Asphalt Pavement Content
Transportation Research Record: Journal of the Transportation Research Board, 2011This study extensively evaluated the resistance to moisture damage and thermal cracking of hot-mix asphalt (HMA) mixtures with high recycled asphalt pavement (RAP) content (up to 50%) from field sections on provincial Highway 8 between Gimli and Hnausa in Manitoba, Canada.
Luis Loria +5 more
openaire +1 more source
Estimation of elastic modulus of cement asphalt binder with high content of asphalt
Construction and Building Materials, 2017Abstract In this paper, the effects of asphalt-to-cement ratio (A/C) and water-to-cement ratio (W/C) on the elastic modulus E c of cement asphalt (CA) binder were studied through measuring the stress-strain curves and phase volume fractions of various CA binder specimens. The results illustrate that the CA binder with high asphalt content (A/C ⩾ 0.
Qing Tian +5 more
openaire +1 more source
Rheological properties of high-asphalt-content emulsified asphalt
Construction and Building Materials, 2023Pinhui Zhao +10 more
openaire +1 more source
Evaluation of Warm Mix Asphalts with High Reclaimed Asphalt Content
The present chapter provides a synthesis of the research activity of RILEM TC 264-RAP Task Group 2 (Performance of Recycled As-phalt Mixtures Manufactured at Lower Temperatures). The study fo-cused on evaluating the mechanical performance of asphalt mixtures incorporating 40% reclaimed asphalt (RA) and produced using warm mix asphalt (WMA) technologies.Marsac P. +11 more
openaire +1 more source
Construction and Building Materials, 2019
Abstract The effects of cement and emulsified asphalt contents on the performance of cement-emulsified asphalt mixture were systematically evaluated, including the indirect tensile strength, compressive strength, modulus of resilience, tensile strength ratio, dynamic stability, maximum bending strain, and Cantabro loss.
Jingjing Xiao +4 more
openaire +1 more source
Abstract The effects of cement and emulsified asphalt contents on the performance of cement-emulsified asphalt mixture were systematically evaluated, including the indirect tensile strength, compressive strength, modulus of resilience, tensile strength ratio, dynamic stability, maximum bending strain, and Cantabro loss.
Jingjing Xiao +4 more
openaire +1 more source
Design Method of Asphalt Treated Base Asphalt Content Based on Cohesive Strength
Applied Mechanics and Materials, 2013Combining with compression strength and tensile strength, the cohesive strength method is applied to determine the asphalt content (by weight of aggregate) of asphalt treated base (ATB) for the purpose meeting ATB tensile performance. The results are compared with those of Marshall Method.
Yi Zhang +3 more
openaire +1 more source