Results 111 to 120 of about 208,968 (293)

Austenite grain growth and grain size distribution in isothermal heat-treatment of 300M steel

, 2017
In order to investigate the austenite grain growth behavior in isothermal heat-treatment of 300M steel, experiments under different temperatures are conducted.
Rongchuang Chen, C. Hong, Jianjun Li, Zhizhen Zheng, P. Li   +4 more
semanticscholar   +1 more source

Thermodynamic Modeling of Sn–C and Fe–Sn–C Systems for the Tramp Elements Control in Steel Production

steel research international, EarlyView.
A CALculation of PHAse Diagrams thermodynamic modeling for Fe–Sn–C system is carried out. The model and the developed database can be used to calculate phase diagrams and thermodynamic properties of this system over wide temperature/composition range, and a part of a larger thermodynamic database for steel and alloy system, and effectively used to ...
Won‐Bum Park, Michael Bernhard, Youn‐Bae Kang   +2 more
wiley   +1 more source

Mechanical Properties Improvement of Low Carbon Steel by Combined Heat Treatments [PDF]

, 2001
The improvement of the Mechanical properties of the low Carbon steel and increasing its strength, was the goal of some heat treatment technologies developed in the last twenty years. One of these technologies is the Rapid Heat Treatment (RHT), by which
Abou-Jahjah, J., Dobránszky, János
core  

Increasing the Reuse Potential of High‐Strength Steels by Extending the Fatigue Life through Surface Treatments

steel research international, EarlyView.
Surface reconditioning through mechanical and electrochemical polishing is shown to extend the fatigue life of predamaged 42CrMo4 steel by over 12 times. By removing ≈100 μm of surface material, surface‐driven fatigue damage is mitigated. This study introduces a reuse potential metric to evaluate fatigue recovery and support sustainable steel reuse. To
Ayush Shrivastava, Oguz Gulbay, Srinivasa Raghavan Raghuraman, Marion Kreins, Fabian Weber, Peter Starke, Alexander Gramlich, Ulrich Krupp   +7 more
wiley   +1 more source

Austenite Grain Growth Kinetics after Isothermal Deformation in Microalloyed Steels with Varying Nb Concentrations

, 2018
Grain growth in microalloyed steels has been studied extensively in the last two decades with some equations developed to predict the growth behaviour in these steels.1–3) The addition of microalloying elements (Nb, Ti, or V) results in precipitation of ...
K. Annan, W. Stumpf
semanticscholar   +1 more source

Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra‐Heavy Gage

steel research international, EarlyView.
This study develops alloy concepts for ultraheavy steel plates (>100 mm) with ≥690 MPa yield strength. Through dilatometry and Jominy testing, the effects of Mo, Ni, and B on hardenability are quantified. A synergy between 0.5% Mo and 0.5%–1.0% Ni ensures core strength at low cooling rates, while boron microalloying suppresses ferrite and promotes ...
Xabier Azpeitia, Unai Mayo, Nerea Isasti, Eric Detemple, Hardy Mohrbacher, Pello Uranga   +5 more
wiley   +1 more source

Exploiting Residual Elements Arising from Scrap Steel in Future Sustainable Steel Alloy Design

steel research international, EarlyView.
Herein, the effects of residual elements Cu and Sn on grain growth, recrystallization, and phase transformation in C–Mn steel are summarized, and a case study is presented on how the presence of residual elements can be exploited to reduce deliberate Nb microalloying while achieving the same grain size control and strength during thermomechanical ...
Claire Davis, Carl Slater, Yulin Ju, Jiaqi Duan, Pedram Dastur, Martin Strangwood   +5 more
wiley   +1 more source

Microstructure, Defects, and Fatigue Response of High‐Strength Tool Steels

steel research international, EarlyView.
The martensitic tool steel family is designed for use in various working environments where they are subjected to repeatedly high mechanical loads. Despite the continuous upgrade of material´s microstructures through compositional development or processing techniques, defects remain a critical factor for the tool performance by leading to fatigue ...
Katerina Chantziara, Jens Bergström, Dimitrios Nikas, Mikael Thomas Grehk   +3 more
wiley   +1 more source

Study of austenite grain growth and recrystallization behavior in pipeline steels containing niobium

Materials Research Express
The austenite grain growth and recrystallization behaviors of three pipeline steels with different Nb contents were investigated through reheating and thermal simulation compression experiments.
Fengliang Tan, Jinbiao Cui, Ning Liu, Li Wang, Jiansheng Chen, Shiwei Tian, Yantao Li   +6 more
doaj   +1 more source

Influence of Heat Treatment Temperature on Crevice and Pitting Corrosion of UNS S32205 Duplex Stainless Steel

steel research international, EarlyView.
Heat treatments that alter the proportions of austenite and ferrite phases or induce the precipitation of phases such as sigma in duplex stainless steel UNS S32205 make it more susceptible to pitting and crevice corrosion. However, the effects of these treatments are not always evident when analyzed using the cyclic polarization technique.
Alba Regina Turin, Jomar José Knaip Ribeiro, Alex Pizzatto, Oriana Palma Calabokis, Yamid E. Nuñez de la Rosa, Pedro Victorio Caetano Abrantes Quadros, Claudio Moreira de Alcantara, Tiago Cousseau, Paulo César Borges   +8 more
wiley   +1 more source