Results 121 to 130 of about 18,897 (273)

Phase-field analysis of quenching and partitioning in a polycrystalline Fe-C system under constrained-carbon equilibrium condition

, 2018
Mechanical properties of steels are significantly enhanced by retained austenite. Particularly, it has been shown that a recently developed heat-treatment technique called Quenching and Partitioning (Q\&P) stabilises austenite effectively. In the present
Amos, P G Kubendran, Nestler, Britta, Schneider, Daniel, Schoof, Ephraim, Streichan, Nick   +4 more
core   +1 more source

In Situ Alloying of H13 Tool Steel With TiC via PBF‐LB/M

steel research international, EarlyView.
H13 tool steel is in situ alloyed with titanium carbides (TiC) in amounts up to 30 wt.%. This approach offers the advantage that the carbides melt only partially during processing, preventing excessive carbon enrichment of the steel matrix. The resulting microstructure consists of coarse, undissolved and fine, reprecipitated carbides, leading to grain ...
Oliver Bürgi, Anke Kaletsch, Christoph Broeckmann   +2 more
wiley   +1 more source

Exploiting Residual Elements Arising from Scrap Steel in Future Sustainable Steel Alloy Design

steel research international, EarlyView.
Herein, the effects of residual elements Cu and Sn on grain growth, recrystallization, and phase transformation in C–Mn steel are summarized, and a case study is presented on how the presence of residual elements can be exploited to reduce deliberate Nb microalloying while achieving the same grain size control and strength during thermomechanical ...
Claire Davis, Carl Slater, Yulin Ju, Jiaqi Duan, Pedram Dastur, Martin Strangwood   +5 more
wiley   +1 more source

Study on the stability of retained austenite in marine steel

Metalurgija, 2020
The residual austenite stability in marine steel was studied by different heat treatment processes. After heat-treatment process 1 (quenching + tempering) and heat treatment process 2 (quenching + intercritical annealing + tempering), the austenite ...
X. Z. He, X. Y. Zhang, J. G. Li, L. Yan
doaj  

Microstructure, Defects, and Fatigue Response of High‐Strength Tool Steels

steel research international, EarlyView.
The martensitic tool steel family is designed for use in various working environments where they are subjected to repeatedly high mechanical loads. Despite the continuous upgrade of material´s microstructures through compositional development or processing techniques, defects remain a critical factor for the tool performance by leading to fatigue ...
Katerina Chantziara, Jens Bergström, Dimitrios Nikas, Mikael Thomas Grehk   +3 more
wiley   +1 more source

Modelling the flow behaviour, recrystallisation and crystallographic texture in hot deformed Fe-30wt%Ni Austenite [PDF]

, 2007
: The present work describes a hybrid modelling approach developed for predicting the flow behaviour, recrystallisation characteristics and crystallographic texture evolution in a Fe-30wt%Ni austenitic model alloy subjected to hot plane strain ...
Abbod, MF, Cizek, P, Linkens, DA, Mahfouf, M, Sellars, CM   +4 more
core  

Two‐Stage Isothermal Transformation of Austenite into Nanobainite in a Chemically Inhomogeneous Medium‐Alloy Steel Containing 0.5 wt% C

steel research international, EarlyView.
The effect of chemical inhomogeneity on the microstructure and properties of nanobainitic steel is investigated. A two‐stage isothermal heat treatment that produced a more uniform microstructure is designed. The first‐stage temperature is higher than the MS of depleted bands; conversely, the second‐stage temperature is lower than the first‐stage ...
Bogdan Garbarz, Jarosław Marcisz, Marek Jelec, Władysław Zalecki, Radosław Rozmus, Zofia Kania‐Pifczyk   +5 more
wiley   +1 more source

Effect of Precipitated Particles on Austenite Grain Growth of Al- and Nb-Microalloyed 20MnCr Gear Steel

Metals
The paper deals with the effect of the morphology characteristics, grain size, and the volume fraction of AlN- and NbC-precipitated particles on the prior austenite grain growth behavior in the Al- and Nb-microalloying 20MnCr gear steel during pseudo ...
Yingqi Zhu, Shitao Fan, Xiuzhen Lian, Na Min   +3 more
doaj   +1 more source

Influence of Heat Treatment Temperature on Crevice and Pitting Corrosion of UNS S32205 Duplex Stainless Steel

steel research international, EarlyView.
Heat treatments that alter the proportions of austenite and ferrite phases or induce the precipitation of phases such as sigma in duplex stainless steel UNS S32205 make it more susceptible to pitting and crevice corrosion. However, the effects of these treatments are not always evident when analyzed using the cyclic polarization technique.
Alba Regina Turin, Jomar José Knaip Ribeiro, Alex Pizzatto, Oriana Palma Calabokis, Yamid E. Nuñez de la Rosa, Pedro Victorio Caetano Abrantes Quadros, Claudio Moreira de Alcantara, Tiago Cousseau, Paulo César Borges   +8 more
wiley   +1 more source

Tailoring Laser Powder Bed Fusion and Post‐Processing Parameters for JIS SKD61 Tool Steels: Surface Roughness, Microstructure, and Mechanical Properties

steel research international, EarlyView.
Laser powder bed fusion of JIS SKD61 tool steel is systematically optimized using a Taguchi design and ANOVA. Hatch spacing and layer thickness are identified as dominant parameters controlling surface roughness and tensile strength. Subsequent tempering at 600°C improves microstructural stability and mechanical performance, enabling high‐density SKD61
Masrurotin Masrurotin, Andi Ard Maidhah, Maziar Ramezani, Wojciech Macek, Cho‐Pei Jiang   +4 more
wiley   +1 more source