Results 91 to 100 of about 4,444 (221)

Microstructural Evolution and Mechanical Properties of AZ91 and SiCp/AZ91 Magnesium Alloys upon Rapid Solidification/Powder Metallurgy Followed by Hot Extrusion

open access: yes, 2010
In this study, AZ91 and SiC particulates reinforced AZ91 (SiCp/AZ91) magnesium alloys were successfully fabricated using rapid solidification/powder metallurgy technique followed by hot extrusion.
Guang Hui Min   +4 more
core   +1 more source

Investigation of Mechanical and Corrosion Behavior of ECAP Processed AA7075 Through ML, ANNW, RSM, and SA Methodologies

open access: yesEngineering Reports, Volume 7, Issue 4, April 2025.
The impact of ECAP processing parameters on mechanical properties and corrosion behavior of AA7075 were discussed using experimental, ML, and RS methodologies. It was found that ECAP resulted in notable improvement in both mechanical and corrosion behavior for AA7075, which can be attributed to the significant grain refinement after processing ...
Majed Alinizzi   +9 more
wiley   +1 more source

“Impact of Grain Reduction on the Behavior of AZ91 Magnesium Alloys During Wear and Corrosion” [PDF]

open access: yesIranian Journal of Materials Science and Engineering
Magnesium and the alloys made from the same metal are utilized in the engineering applications such as automotive, marine, and aircraft, among others due to high strength to weight. Nevertheless, the applications of magnesium alloys are currently limited
Gajanan M Naik   +5 more
doaj  

Tribological Properties of WC-12Co Coating on AZ91 Magnesium Alloy Fabricated by High Velocity Oxy-Fuel Spray

open access: yesHigh Temperature Materials and Processes, 2014
In this study, conventional WC-12Co cermet coatings were deposited on AZ91 magnesium alloy using High Velocity Oxy-Fuel spray method. The effects of different coating thicknesses (60 and 120 µm) and wear loads (20 and 30 N) on tribological properties of ...
Yıldız F.
doaj   +1 more source

AZ91 magnezyum alaşımının işlenebilirliğinin incelenmesi

open access: yes, 2020
Bu çalışmada AZ91D Magnezyum alaşımının tornalamada işlenebilirliği, Taguchi metodu yöntemi kullanılarak araştırılmıştır. Çalışmanın sonucunda, elde edilen yüzey pürüzlülük sonuçları Yapay Sinir Ağları (YSA) ile modellenerek karşılaştırması yapılmıştır.
openaire   +2 more sources

Creep Behavior of AZ91 Magnesium Alloy

open access: yesProcedia Engineering, 2013
AbstractEffects of intermetallic phases on the creep behavior of AZ91 magnesium alloy have been studied. Thermally stable intermetallic phases such as Mg2Si and Mg3Sb2 are introduced deliberately in AZ91 alloy by the adding Si and Sb (0.5% Si, 0.5% Sb and 0.5% Si+0.2% Sb, all are in wt %).
Srinivasan, A.   +4 more
openaire   +1 more source

Effects of Erbium Addition on the Corrosion Resistance and Microstructure of AZ91 Magnesium Alloy

open access: yes, 2011
The microstructures and corrosion resistance of AZ91 and AZ91+0.5 wt.% erbium (Er) magnesium alloys were studied, respectively. The results show that the Er addition in scrap AZ91 magnesium alloy can improve the corrosion resistance, markedly.
Yang Xu, Jing Zhu, Zhong Jun Wang
core   +1 more source

The growth behavior and performance of microarc oxidation coating on AZ91/Ti composite: Influence of Ti-reinforcement phase and electrolyte

open access: yesJournal of Magnesium and Alloys
Magnesium matrix composites with both high strength and ductility have been achieved by introducing pure Ti particles. However, the properties of the surfaces of the composites need to be improved by surface technology, such as micro-arc oxidation (MAO).
Jinchao Jiao   +6 more
doaj   +1 more source

Effect of welding parameters on mechanical performance, fracture toughness, and microstructural evolution of similar and dissimilar AA6082/AZ91 friction stir welded joints

open access: yesJournal of Materials Research and Technology
Friction stir welding of aluminum–magnesium systems requires careful control of heat input because excessive or insufficient thermal exposure can degrade joint integrity.
Ibrahim Sabry, Mohamed ElWakil
doaj   +1 more source

A comparative corrosion behavior of Mg, AZ31 and AZ91 alloys in 3.5% NaCl solution

open access: yesJournal of Magnesium and Alloys, 2015
The corrosion behavior of Mg, AZ31 and AZ91 has been evaluated in 3.5% NaCl solution using weight loss, electrochemical polarization and impedance measurements.
I.B. Singh, M. Singh, S. Das
doaj   +1 more source

Home - About - Disclaimer - Privacy