Results 181 to 190 of about 4,444 (221)
Some of the next articles are maybe not open access.

Microstructural stability and high-temperature mechanical properties of AZ91 and AZ91+2RE magnesium alloys

Materials & Design, 2011
Abstract The effects of 2 wt.% rare earth element addition on the microstructure evolution, thermal stability and shear strength of AZ91 alloy were investigated in the as-cast and annealed conditions. The as-cast structure of AZ91 consists of α-Mg matrix and the β-Mg17Al12 intermetallic phase.
R. Mahmudi, F. Kabirian, Z. Nematollahi
openaire   +1 more source

Precipitation Simulation of AZ91 Alloy

JOM, 2014
Precipitation simulation of AZ91 (Mg-9Al-1Zn; all compositions are in wt.% unless otherwise stated.) magnesium alloy is carried out in this work using the PanPrecipitation module of Pandat™ software. In addition to the software, the thermodynamic database, mobility database, and precipitation database for AZ91 were developed to perform the simulation ...
C. Zhang   +6 more
openaire   +1 more source

Superplasticity in magnesium alloy AZ91

Materials Science and Engineering: A, 1991
Abstract The superplastic properties of conventionally cast and rapidly solidified magnesium alloy AZ91 have been studied. The latter material had by far the best superplastic properties, and elongations of at least 1000% were obtained in the temperature range 275–300 °C. Formation of pores during superplastic deformation had an adverse effect on the
Jan Ketil Solberg   +3 more
openaire   +1 more source

AZ91D and AZ91E ALLOYS

Alloy Digest, 1988
Abstract AZ91D and AZ91E alloys are magnesium-aluminum-zinc-manganese alloys of closely controlled purity. Ingot is available for use in the production of improved corrosion resistant sand, permanent-mold and die castings. AZ91D is used for die casting and AZ91E for sand and permanent-mold castings. This datasheet provides information on
openaire   +1 more source

Superplasticity of an AZ91 Magnesium Alloy

Materials Science Forum, 2007
The superplastic deformation characteristics of the AZ91, the mostly used magnesium alloy, were investigated at various strain rates in the interval from 3x10-5 to 1x10-2 s-1 and temperature of 420 °C. To prepare superplastic alloys thermo-mechanical treatment was used.
Zoltán Száraz   +3 more
openaire   +1 more source

Damping capacities and tensile properties in Grp/AZ91 and SiCp/Grp/AZ91 magnesium matrix composites

Materials Science and Engineering: A, 2010
Grp/AZ91 and SiCp/Grp/AZ91 magnesium matrix composites were fabricated by stir casting with graphite particle size of 50 μm and SiC particle size of 10 μm. The as-cast composites were extruded at 350 °C with an extrusion ratio of 12:1. The experimental results reveal that the reinforcements play an important role on the tensile properties and damping ...
Y.W. Wu   +6 more
openaire   +1 more source

Corrosion of AZ91 - Influence of the β-Phase Morphology

Materials Science Forum, 2009
The influence of the microstructure, particularly the morphology of the β phase, on the corrosion of Mg alloys has been studied using AZ91 as a model alloy and compared with the corrosion of pure magnesium, used as a standard for comparison. The concentration of the impurity element Fe was below the limit evaluated from theoretical phase diagram ...
M.C. Zhao   +5 more
openaire   +1 more source

Growth of Al8Mn5 Intermetallic in AZ91

2017
Al8Mn5 is crucial for impurity control and corrosion resistance of AZ91. We study the growth morphology of primary and eutectic Al8Mn5 after the equiaxed solidification of AZ91 cooled at ~1 K/s. Primary Al8Mn5 grew as ~10 μm equiaxed faceted crystals with multiple growth facets.
G. Zeng, J. W. Xian, C. M. Gourlay
openaire   +1 more source

Fatigue Fracture of AZ91 Magnesium Alloy

Advances in Computational Intelligence in Materials Science, 2023
On today's environment, the use of the proper material is critical in every business. Materials must be suitable for or meet the specifications of the industrial component. Magnesium alloys are well recognized as the lightest structural alloys. To strengthen its physical attributes, mg is alloyed with other elements.
Subash Chandrabose E   +3 more
openaire   +1 more source

Dendritic solidification of magnesium alloy AZ91

Metallurgical Transactions A, 1990
The magnesium alloy AZ91 has been studied under different solidification conditions, to establish the details of the as-cast structure. The electron backscattered pattern (EBSP) technique has been used to determine the crystallographic directions of the dendrite stem and the secondary arms.
K. Pettersen, O. Lohne, N. Ryum
openaire   +1 more source

Home - About - Disclaimer - Privacy