Results 11 to 20 of about 2,415 (217)
Effect of SiC Nanoparticles on Hot Deformation Behavior and Processing Maps of Magnesium Alloy AZ91 [PDF]
Nanomaterials, 2018 The hot deformation behavior and processing characteristics of AZ91 alloy and nano-SiCp/AZ91 composite were compared at temperature ranges of 523 K–673 K and strain rates of 0.001–1 s−1.
Kaibo Nie +5 more
doaj +2 more sources
Creep Behavior of AZ91 Magnesium Alloy [PDF]
Procedia Engineering, 2013 AbstractEffects of intermetallic phases on the creep behavior of AZ91 magnesium alloy have been studied. Thermally stable intermetallic phases such as Mg2Si and Mg3Sb2 are introduced deliberately in AZ91 alloy by the adding Si and Sb (0.5% Si, 0.5% Sb and 0.5% Si+0.2% Sb, all are in wt %).
Srinivasan, A. +4 more
openaire +2 more sources
Scratch Test Studies on the Connection of Al2O3+40%TiO2 Coating with AZ91 Alloy Casting [PDF]
Archives of Foundry EngineeringThe paper presents the results of scratch tests on the connection of the Al2O3+40%TiO2 coating with the AZ91 alloy casting. The Al2O3+40%TiO2 coating was applied to the AZ91 alloy casting using the APS (Atmospheric Plasma Spraying) method. Microstructure
S. Olszewska, M. Mróz
doaj +3 more sources
Microstructure and surface integrity of machined AZ91 magnesium alloy [PDF]
Journal of Materials Research and Technology, 2023 AZ91 magnesium alloy is one of the most popular materials among all cast magnesium alloys due to its excellent corrosion resistance and good cast-ability.
A. Asgari, H. Delavar, M. Sedighi
doaj +2 more sources
Improving the Corrosion Resistance of AZ91 Magnesium Alloy by Surface Coating TiO2 Layers [PDF]
Metals, 2023 This study adopts the sol-gel method to prepare a TiO2 coating on the surface of the AZ91 magnesium alloy, hydrolyse C16H36O4Ti to generate the TiO2 coating and form a film with excellent corrosion resistance on the surface of an AZ91 magnesium alloy ...
Diqing Wan +8 more
doaj +2 more sources
Investigation of the photo-catalytic coating on AZ91 alloy [PDF]
Journal of Alloys and Compounds, 2009 AT iO 2 thin film was deposited on AZ91 alloy to enhance the corrosion–resistance and photo-catalytic properties. Experimental results showed that the TiO2-coated AZ91 exhibited hydrophilicity. The corrosion potential of TiO2-deposited AZ91 was higher than that of the uncoated AZ91, suggesting an increase in the intrinsic corrosion resistance. Compared
Wang, J.Y. +4 more
openaire +4 more sources
The Effects of Rare Earth Pr and Heat Treatment on the Wear Properties of AZ91 Alloy [PDF]
Crystals, 2018 This paper investigated the influences of Pr addition and heat treatment (T6) on the dry sliding wear behavior of AZ91 alloy. The wear rates and friction coefficients were measured by using a pin-on-disc tribometer under loads of 30, 60 and 90 N at dry ...
Ning Li, Hong Yan
doaj +2 more sources
Improvement of AZ91 Alloy Corrosion Properties by Duplex NI-P Coating Deposition. [PDF]
Materials (Basel), 2020 The corrosion behavior of duplex Ni-P coatings deposited on AZ91 magnesium alloy was studied. The electroless deposition process of duplex Ni-P coating consisted in the preparation of low-phosphorus Ni-P coating (5.7 wt.% of P), which served as a bond ...
Wasserbauer J +5 more
europepmc +2 more sources
Composition of AZ91 alloy. [PDF]
, 2022 Composition of AZ91 alloy.
Lifeng Sun (6727607) +5 more
core +1 more source
Solidification curve of AZ91 alloy. [PDF]
, 2022 Solidification curve of AZ91 alloy.
Lifeng Sun (6727607) +5 more
core +1 more source