Results 81 to 90 of about 4,854 (180)
Surface and Interface Analysis, Volume 58, Issue 5, Page 326-333, May 2026.ABSTRACT In the present study, we have analyzed the growth profile of ruthenium (Ru) thin films, deposited using pulsed direct current (DC) magnetron sputtering technique, by varying the sputtering voltages in the range of 150–420 V. The grazing incidence X‐ray reflectivity (GIXRR), time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS), and atomic ...
Shruti Gupta +6 more
wiley +1 more source
FrictionTo improve the wear and corrosion resistance, bioactivity, and antimicrobial properties of 316L stainless steel in clinical environment, three kinds of composite coatings of B4C, B4C/chitosan (CS), and B4C/CS/SiO2 were designed and deposited by liquid ...
Zhaobo Wu +6 more
doaj +1 more source
The effect of hydrogen on B4C coatings fabrication in inductively coupled plasma torch
AIP Advances, 2018 Boron carbide (B4C) coatings are prepared by an RF inductively coupled plasma (ICP) torch with different amounts of hydrogen introduced into the sheath gas.
Q. J. Guo +5 more
doaj +1 more source
Pulsed DC Sputter Deposition of Stable Turbostratic Boron Nitride Thin Films
Advanced Materials Interfaces, Volume 13, Issue 8, 21 April 2026.Boron nitride (BN) films are deposited by sputtering from a boron target. During deposition, a substrate bias voltage is applied between the plasma and the sample, which reduces excess boron in the film and enhances the crystallinity. This process prevents the formation of boric acid and ammonium borate hydrate.
Josef Schätz +9 more
wiley +1 more source
SPS sintering of B4C-SiC composites [PDF]
, 2023 Boron carbide (B4C) - silicon carbide (SiC) ceramic composites were obtained through the densification of B4C and -SiC powders with different ratios using the spark plasma sintering (SPS) technique.
Matović, Branko
core
Development of Laterally Graded X‐Ray Multilayer Optics
Advanced Materials Technologies, Volume 11, Issue 8, 17 April 2026.This work presents the development of laterally graded X‐ray multilayer optics with both constant and variable lateral gradients. By precisely controlling substrate speed profiles and mask design, these multilayers achieve highly accurate lateral gradients and excellent sagittal thickness uniformity, making them ideal for spectroscopy application at ...
Arindam Majhi +11 more
wiley +1 more source
Nano Select, Volume 7, Issue 4, April 2026.This review analyses wearable electronic textiles for health monitoring by connecting technological innovations with adoption barriers. It discusses advances in textile‐integrated physiological sensing while emphasizing challenges such as user comfort, manufacturing scalability, reliability in real‐use conditions, and socio‐technical acceptance that ...
George Kwame Fobiri +9 more
wiley +1 more source
Sintering aids for manufacture of hot-pressed TiB2-B4C composite ceramics [PDF]
To search the effective sintering aids for (TiB2)0.6(B4C)0.4 composite ceramics, the ceramic compacts were hot-pressed at 1950℃ (some 1750, 1650℃) for 1 hour under 28.2 MPa with 6 mol% each of SiC, AlN, Si3N4, TiN and Y2O3 sintering aids.
HORIGUCHI Katsumi +3 more
core
Gazi Üniversitesi Fen Bilimleri DergisiBu çalışmada sürtünme karıştırma yöntemi ile AA6061 alüminyum alaşımı ve farklı oranlarda TiB2/Nano Grafen/B4C takviyeli hibrit yüzey kompozitleri üretilmiş ve mekanik özellikleri ile mikroyapı analizleri yapılmıştır.
Burcu Şahingöz +2 more
doaj +1 more source
Effect of Microstructure on Mechanical Properties and Erosive Wear of B4C and B4C-CrB2 Composites.
Journal of the Ceramic Society of Japan, 2003 Monolithic B4C and B4C-20 mol% CrB2 composite ceramics were fabricated by hot pressing at 1900 and 2050°C. Erosive wear by Al2O3 particle impingement was tested using a sandblaster. The microstructure, mechanical properties and erosive wear of the ceramic specimens were examined and compared with those of a commercial B4C ceramic.
YAMADA, Suzuya +4 more
openaire +2 more sources