Results 1 to 10 of about 18,620 (288)
Initial Design of a Novel Barge-Type Floating Offshore Wind Turbine in Shallow Water
The studies on floating offshore wind turbines (FOWTs) have been increasing over recent decades due to the growing interest in offshore renewable energy.
Yiming Zhou +6 more
doaj +2 more sources
The dynamic responses of a new structure combining a barge-type floating offshore wind turbine and an aquaculture cage is investigated numerically. First, a 5 MW barge-type floating offshore wind turbine with an aquaculture cage (FOWT-AC) is designed and
Yuting Zhai +3 more
doaj +2 more sources
Structural Analysis of a Barge Midship Section Considering the Still Water and Wave Load Effects
Structural failures in the barge midship sections can cause operational delay, sinking, cargo loss and environmental damage. These failures can be generated by the barge and cargo weights, and wave load effects on the midships sections.
Cristian M. Salazar-Domínguez +4 more
doaj +2 more sources
Undesired motions in Floating Offshore Wind Turbines (FOWT) lead to reduction of system efficiency, the system’s lifespan, wind and wave energy mitigation and increment of stress on the system and maintenance costs.
Payam Aboutalebi +3 more
doaj +2 more sources
Motion Control System Design for Barge-Type Surface Ships Using Tugboats
Barge ships are designed to transport and assemble heavy and massive pieces of equipment at sea. Active propulsion systems are not installed in this type of ship, so the desirable motion and positioning of these ships can only be achieved with the ...
Dong-Hun Lee +3 more
doaj +2 more sources
Mean Wave Drift Forces on a Barge-Type Floating Wind Turbine Platform with Moonpools
Barge-type platforms with moonpools are a promising type of foundation for floating offshore wind turbines due to their good seakeeping performance.
Lei Tan +3 more
doaj +2 more sources
The shipbuilding design rules require several criteria for the assessment of any floating structure. For this technical paper, a 23000 t off-shore barge is assessed by oblique waves global strength criteria.
Leonard Domnișoru
doaj +1 more source
In this paper, a yacht project in Tingjiang Town, Mawei, Fujian, is suggested as an example of a barge type breakwater made out of scrap barges. The physical modelling of a two-dimensional flume wave test was carried out on a barge-type breakwater ...
Xiaofei Cheng, Shimin Li, G. Wang
semanticscholar +1 more source
On the river barge of 3000 T preliminary seakeeping approach
This study concerns the preliminary seakeeping analysis of a river barge of 3000 T with length of 90 m and two main loading conditions: full cargo and ballast. As environmental conditions the maximum wave heigh is 2 m, with whole range wave-barge heading
Dumitru Silviu Perijoc +1 more
doaj +1 more source
Bridges across waterways are susceptible to failure from ship collisions. Therefore, to provide a reference for bridge design and protection, reported here is a study of the response of a bridge pier during a collision with a barge.
semanticscholar +1 more source

