Results 31 to 40 of about 3,411 (200)
In order to solve the defect of insufficient performance of the single fiber reinforced plastic (FRP) bars. The basalt fibers and glass fibers are prepared into the basalt-glass fibers hybrid FRP composite bars (B/G hybrid FRP bars) in this paper.
Gang Wu +4 more
doaj +1 more source
Abstract: Basalt fiber is a type of mineral fiber that is derived from basalt rock. It has excellent mechanical properties, high resistance to chemicals, superior thermal stability, and good resistance to moisture. Additionally, it is environmentally friendly as it can be easily recycled.
Gajanan S. Mundhe +3 more
openaire +1 more source
Surface functionalization of polypropylene macrofibers to enhance fiber‐matrix interfacial bonding. ABSTRACT Concrete is the most used higher compressive strength‐building material, albeit brittle to tensile, and flexural loads. Polypropylene (PP) synthetic polymeric macrofibres are commonly employed as reinforcement material to prevent this situation ...
Elena Saccani +3 more
wiley +1 more source
Influence of sizing of basalt fiber on the mechanical behavior of basalt fiber reinforced concrete
In this study, the original basalt fiber (BF), and the sizing-removed BF through the heat treatment were pneumatically dispersed by using an air compressor and then were added into normal strength concrete to produce BF reinforced concrete (BFRC). The compressive test, splitting tensile test, and flexural test of BFRC specimens with two types of BF ...
Yeou-Fong Li +4 more
openaire +2 more sources
Revisiting the synthesis of dimethyl carbonate from methanol and carbon dioxide
Abstract The process for producing dimethyl carbonate (DMC) from carbon dioxide (CO2) and methanol is explored in this article. It provides an overview of the thermodynamics involved in DMC synthesis, discussing the challenges and potential solutions. The article highlights the reported use of catalysts and dehydrating agents to improve DMC yield and ...
Diego Alexander Santos Araque +3 more
wiley +1 more source
Fatigue Performance Of High-Modulus Basalt Fiber-Reinforced Asphalt Mixture
An effective way to improve the rutting resistance of asphalt pavement is to increase the modulus of the middle surface layer of the asphalt mixture. However, the fatigue performance of high-modulus asphalt mixtures hinders this development.
Jingjing Dai, Xiaodong Jia
doaj +1 more source
Review and prospects of shear test of bolted rock joints
The laboratory shear test equipment, test method, and numerical simulation of bolted rock joints were summarized. The shortcomings and limitations of the current research were analyzed, and the research prospects were proposed. Abstract Rock bolting is a critical approach in geotechnical engineering for supporting weak rocks.
Shulin Ren +4 more
wiley +1 more source
This study investigates the compression behavior of circular concrete columns confined with basalt fiber-reinforced polymer (BFRP) stirrups, comparing their performance with traditional steel-reinforced columns.
Sufian Muhammad +5 more
doaj +1 more source
The Williams–Landel–Ferry (WLF) equation is critical for predicting the rheological behavior of viscoelastic materials. However, no research has reported the main parameters, C1 and C2, in WLF equations for fiber-reinforced asphalts (FRAs).
Xiao Cheng, Bin Zhong, Zhishen Wu
doaj +1 more source
Seismic analysis and design of tunnels within fault ground: A review
The research methods of seismic response of tunnels within fault ground, including field investigations, analytical solutions, physical experiments, and numerical simulations, and seismic countermeasures are discussed. The present study examines the shortcomings and limitations of the current research and design, and puts forward proposals for future ...
Xingda Wang +6 more
wiley +1 more source

