Results 161 to 170 of about 2,616,861 (245)
This study addresses hard roof coal seam conditions by optimizing key stratum blasting‐cutting parameters through theoretical analysis, numerical simulation, and field tests. It proposes calculation methods for blast hole spacing and delay timing based on stress wave theory, controlling roadway deformation within 35 mm, thereby enhancing resource ...
Qiong Liu, Duanxiang Fu, Hongbin Li
wiley +1 more source
Out-of-Plane Skew Effects on the Cyclic Performance of Column-Tree Steel Moment Connections. [PDF]
Kim GW, Hong JK.
europepmc +1 more source
This study on close coal seams shows that multi‐seam mining increases the height of the fractured zone from approximately 26 m (single upper‐seam mining) to about 49 m. When the lower seam is mined after the extraction of the upper seam, the heights of both the caved zone and the fractured zone increase by approximately two times.
Xiaoyu Wu +4 more
wiley +1 more source
Structural response of RC beam-column joints reinforced with smart alloys and polyvinyl alcohol fibers. [PDF]
Alqarni AS, Alshannag MJ, Higazey MM.
europepmc +1 more source
Effect of volume for injection of the 15th to 16th thoracic interspinous space: An ex vivo study
Abstract Background Impinging (overriding) spinous processes (ISPs) are commonly identified in horses with back pain. Diagnostic analgesia is widely used as the clinical reference standard for confirming association with clinical signs of back pain, but the specificity of dorsal spinous region diagnostic analgesia remains poorly understood.
Virginia Melly +6 more
wiley +1 more source
Investigation of finite element simulation-based bond-slip effect for seismically vulnerable school reinforced concrete building frame. [PDF]
Kang H, Lee K, Shin S, Woo J, Shin J.
europepmc +1 more source
ABSTRACT Aeolian desertification poses a critical threat to ecosystem stability in arid regions worldwide. Although the combination of sand barriers and vegetation has been widely applied for sand fixation, its long‐term effectiveness is constrained by barrier degradation, slow natural development of biological soil crusts (BSCs), and the resulting ...
Bin Pan, Chen Meng
wiley +1 more source
3D-Printed Geopolymer Composite Truss Beam: Experimental Verification of Manufacturing and Load-Bearing Capacity in Four-Point Bending. [PDF]
Stoklasa VJ +6 more
europepmc +1 more source
A monochrome multi‐task diffractive optical network architecture is designed to leverage illumination‐phase multiplexing to dynamically reconfigure its output function and accurately implement a large set of complex‐valued linear transformations between an input and an output aperture.
Xiao Wang, Aydogan Ozcan
wiley +1 more source
Controllable patterning of magnetic bits with atomically sharp boundaries. [PDF]
Wang Q +7 more
europepmc +1 more source

