Primary rupture law of main roof in long-wall face based on principal bending moment [PDF]
Scientific ReportsIn order to accurately understand the primary rupture law of main roof in long-wall face, the principal bending moment was visualized with the aid of MATLAB software, the rupture direction of each region of the main roof was theoretically analyzed, the ...
Haigang Yang +4 more
doaj +2 more sources
Research on bending tests and modified calculation of flexural strength for hybrid reinforced pipe piles [PDF]
Scientific ReportsTo investigate the influence of ordinary reinforcement on the bending moment capacity of prestressed high-strength concrete (PHC) pipe piles, this study conducted flexural tests on four prestressed reinforced concrete (PRC) pipe piles with hybrid ...
Xinxi Liu +4 more
doaj +2 more sources
Model test study of bending moment and negative skin friction for batter rock-socketed piles under surface load [PDF]
E3S Web of Conferences, 2021 Batter rock-socketed piles (BRSP) foundation is one of common foundations, such as port engineering or cross-sea bridge, while there are few studies on negative skin friction for BRSP.
Wei Guo +5 more
doaj +1 more source
A New Design Method of Shield Tunnel Based on the Concept of Minimum Bending Moment
Applied Sciences, 2022 As the soil-resistance coefficient in a soft soil area is small, overlarge bending moment may cause exceeding transverse deformation for the shield tunnel and cause structural diseases and waterproof failure at the longitudinal segment joints.
Dawei Huang +5 more
doaj +1 more source
Applied Sciences, 2023 This paper analyzes and calculates the mechanical properties of composite tape spring structures during folding and bending and establishes a non-linear control equation for the folding and bending of composite laminate tape spring structures.
Yang Yang, Fan Wang, Jieshan Liu
doaj +1 more source
Experimental study on rubber concrete filled steel tube members under pure bending
Scientific Reports, 2022 The test of four rubber concrete filled steel tube (RuCFST) members, one concrete filled steel tube (CFST) member and one empty member were conducted under pure bending.
Hongshuang Wu +4 more
doaj +1 more source
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [PDF]
تحقیقات علوم چوب و کاغذ ایران, 2012 The goal of this study was to investigate bending moment resistance of L-shaped screwed corner joints constructed of Plywood members. The thickness of plywood members was nominal 19mm that were compared with medium density fiberboard (MDF) and ...
Sadegh Maleki +3 more
doaj +1 more source
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [PDF]
تحقیقات علوم چوب و کاغذ ایران, 2013 The bending moment resistance under diagonal tensile load of doweled joint in plywood members was investigated. Joint members were cut from 11-ply hardwood plywood (Beech, Hornbeam and Alder) at the nominal thickness of19 mm.
Mosayeb Dalvand +3 more
doaj +1 more source
Buildings, 2023 Based on the up-floating incident of the basement in a high-rise residential building, the finite element (FE) model of the up-floating destruction region is established to investigate the damage mechanism.
Zhifeng Wu +5 more
doaj +1 more source
Applied Sciences, 2022 The measurement of shaft bending (whirling) moment can be performed via a telemetry system including strain gauges which can obtain the bending stress.
Quang Dao Vuong +8 more
doaj +1 more source