Results 1 to 10 of about 116 (103)

Optimization of processing parameters for the manufacturing of jute stick binderless particleboard [PDF]

Journal of Wood Science, 2020
This study investigated the effects of processing parameters, namely particle mixing ratios, press temperatures, and time for the manufacturing of jute stick binderless particleboard (JBPB).
Ireen Parvin Nitu, Md Nazrul Islam, Md Ashaduzzaman, Md Khairul Amin, Md Iftekhar Shams   +4 more
doaj   +2 more sources

Development of a Binderless Particleboard from Brown Seaweed Sargassum spp. [PDF]

Materials (Basel)
Since 2010, huge quantities of Sargassum spp. algae have been proliferating in the Atlantic Ocean and stranding on Caribbean beaches, causing major economic, environmental, and health problems. In this study, an innovative high-density binderless particleboard was developed using uniaxial thermo-compression coupled with a cooling system.
Bauta J, Vaca-Medina G, Delgado Raynaud C, Simon V, Vandenbossche V, Rouilly A.   +5 more
europepmc   +5 more sources

PROPERTIES OF BINDERLESS PARTICLEBOARD PANELS MANUFACTURED FROM OIL PALM BIOMASS

BioResources, 2012
The objective of the study was to investigate physical and mechanical properties of experimental particleboard panels manufactured from oil palm (Elaeis guineensis) biomass without using any adhesives.
Rokiah Hashim,, Wan Noor Aidawati Wan Nadhari,, Othman Sulaiman,, Masatoshi Sato,, Salim Hiziroglu,, Fumio Kawamura,, Tomoko Sugimoto,, Tay Guan Seng, ,Ryohei Tanaka   +8 more
doaj   +2 more sources

The Influence of Processing and Particle Size on Binderless Particleboards Made from Arundo donax L. Rhizome. [PDF]

Polymers (Basel), 2020
The giant reed (Arundo donax L.) is considered one of the world’s 100 worst invasive species. The main method by which this species propagates is by growth of scattered fragments of rhizome, spreading without control with very strong, deep roots. Agricultural waste consists of lignocellulosic materials that can substitute natural wood and offer a ...
Ferrandez-Villena M, Ferrandez-Garcia CE, Garcia-Ortuño T, Ferrandez-Garcia A, Ferrandez-Garcia MT.   +4 more
europepmc   +5 more sources

EFFECT OF ALKALINE TREATMENT ON PROPERTIES OF RATTAN WASTE AND FABRICATED BINDERLESS PARTICLEBOARD

International Islamic University Malaysia Engineering Journal, 2018
Binderless particleboard (BPB) has become an alternative to avoiding the usage of synthetic resin, possessing excellent properties but having low dimensional stability characteristics.
Zuraida Ahmad, Maisarah Tajuddin, Nurul Farhana Fatin Salim, Zahurin Halim   +3 more
doaj   +3 more sources

Engineering Wood Products from Eucalyptus spp.

Advances in Materials Science and Engineering, Volume 2022, Issue 1, 2022., 2022
Forest covers 4.06 billion hectares (ha) or 31% of the total land area worldwide, where 93% (3.75 billion ha) are natural regenerating forests and the remaining 7% (294 million ha) are planted forests. Eucalyptus spp., being one of the most important plantation species, has been planted in 95 countries around the world, and the area of plantation has ...
Lee Seng Hua, Lum Wei Chen, Petar Antov, Lubos Kristak, Paridah Md Tahir, Veronica Calado   +5 more
wiley   +1 more source

Study on preparation of high-performance binderless board from Broussonetia papyrifera

Journal of Wood Science, 2023
Binderless particleboards were prepared without any resin adhesives from Broussonetia papyrifera trunk by hot pressing. The effects of particle size, pressing time, pressing temperature and board density on the physical and mechanical properties of ...
Muyang Chen, Siqi Zheng, Jiabiao Wu, Jianying Xu   +3 more
doaj   +1 more source

Influence of the Density in Binderless Particleboards Made from Sorghum

Agronomy, 2022
In order to fight climate change and decouple economic growth from material use, valorization of waste will be fundamental. Sorghum is one of the most important summer crops in the world. The non-edible parts of the plant, the stalks and leaves are left over and must be disposed of. This work proposes to use sorghum waste particles as a raw material to
Antonio Ferrandez-Garcia, Maria Teresa Ferrandez-Garcia, Teresa Garcia-Ortuño, Manuel Ferrandez-Villena   +3 more
openaire   +3 more sources

A Review of Natural Fibers and Processing Operations for the Production of Binderless Boards

BioResources, 2016
Decreasing wood supplies and the need for formaldehyde-free particleboard have become important issues. This has led to studies about the use of raw materials other than wood, along with the manufacture of particleboard without using any synthetic ...
Maisarah Tajuddin, Zuraida Ahmad, Hanafi Ismail   +2 more
doaj   +1 more source

Binderless Particleboard Resistance to Termite Attack

Forest Products Journal, 2012
Abstract Three particleboard types, including urea-formaldehyde (UF), melamine-formaldehyde (MF), and binderless, were made from three wood species, sengon (Paraserianthes falcataria), gmelina (Gmelina arborea), and mindi (Melia azedarach). Wood particle sizes of 10 to 20 mesh were manufactured for the 30 by 30 by 0.7-cm (length by width by ...
Suhasman, Hadi, Y.S., Massijaya, M.Y., Santoso, A.   +3 more
openaire   +2 more sources