Results 121 to 128 of about 574 (128)
Some of the next articles are maybe not open access.
Properties of binderless particleboard from oil palm trunk with addition of polyhydroxyalkanoates
Composites Part B: Engineering, 2012Abstract This study evaluated the properties of binderless particleboard made from oil palm trunk with addition of polyhydroxyalkanoates in the form of freeze dried and pure samples. Modulus of rupture, internal bonding strength, thickness swelling and water absorption of the boards were evaluated based on Japanese Industrial Standards.
Mohana Baskaran +11 more
openaire +1 more source
Materials Today: Proceedings, 2020
Abstract Binderless particleboard panel made from sugarcane (Saccharum officinarum L.) bagasse was manufactured by using waste product of sugarcane. The target density, pressing temperature, pressing time and pressing pressure used were 0.8 g/cm3, 180 °C, 10–40 min and 12 Mpa respectively.
Wan Noor Aidawati Wan Nadhari +7 more
openaire +1 more source
Abstract Binderless particleboard panel made from sugarcane (Saccharum officinarum L.) bagasse was manufactured by using waste product of sugarcane. The target density, pressing temperature, pressing time and pressing pressure used were 0.8 g/cm3, 180 °C, 10–40 min and 12 Mpa respectively.
Wan Noor Aidawati Wan Nadhari +7 more
openaire +1 more source
Journal of the Indian Academy of Wood Science, 2019
The aims of this study were to evaluate the characteristics of the binderless particleboard made from jabon wood, using several combinations of hydrogen peroxide (H2O2) and ferrous sulfate (FeSO4) in an oxidation process. Jabon wood obtained from a community forest was chipped into particles. The particles were then dried to about 10% moisture content.
A. D. Yunianti +2 more
openaire +1 more source
The aims of this study were to evaluate the characteristics of the binderless particleboard made from jabon wood, using several combinations of hydrogen peroxide (H2O2) and ferrous sulfate (FeSO4) in an oxidation process. Jabon wood obtained from a community forest was chipped into particles. The particles were then dried to about 10% moisture content.
A. D. Yunianti +2 more
openaire +1 more source
Radiation Physics and Chemistry, 2017
Abstract This research aims to evaluate the suitability of using binderless particleboard made from Rhizophora spp. mangrove wood as a dosimetric phantom for X-ray in the diagnostic energy regions. Comparative measurements of percentage depth and surface doses in Rhizophora spp.
M.W. Marashdeh +3 more
openaire +1 more source
Abstract This research aims to evaluate the suitability of using binderless particleboard made from Rhizophora spp. mangrove wood as a dosimetric phantom for X-ray in the diagnostic energy regions. Comparative measurements of percentage depth and surface doses in Rhizophora spp.
M.W. Marashdeh +3 more
openaire +1 more source
Influence of processing parameters on some properties of oil palm trunk binderless particleboard
European Journal of Wood and Wood Products, 2013The objective of the study was to evaluate some properties of experimental binderless particleboards produced from various processing parameters. Three different temperatures (160, 180, 200 °C), two different hot pressing times (15, 20 min) and two different pressures (5, 10 MPa) were applied in manufacturing the binderless particleboard.
Jia Geng Boon +5 more
openaire +1 more source
Measurement, 2019
Abstract Contact angles quantify the wettability of the rough or smooth surfaces of board materials. The aim of this study was to experimentally verify the Wenzel and Cassie theory and evaluate the essential properties of the binderless bio-composite particleboard fabricated from oil palm trunk and Acacia mangium wood.
Mohammed Danish +7 more
openaire +1 more source
Abstract Contact angles quantify the wettability of the rough or smooth surfaces of board materials. The aim of this study was to experimentally verify the Wenzel and Cassie theory and evaluate the essential properties of the binderless bio-composite particleboard fabricated from oil palm trunk and Acacia mangium wood.
Mohammed Danish +7 more
openaire +1 more source
Properties of jute stick binderless particleboard reinforced with bagasse pith
Journal of the Indian Academy of Wood Science, 2022Ireen Parvin Nitu +4 more
openaire +1 more source
2010 International Conference on Mechanic Automation and Control Engineering, 2010
Binderless particleboard from kenaf core was prepared by steam-injection hot pressing technology and conventional hot pressing technology respectively, and temperature variations of mat core layer was tested by thermocouple during hot-pressing process, density profile of binderless particleboard was tested by isotopic density tester, the effect of two ...
null Zheng Xia, Jian-ying Xu
openaire +1 more source
Binderless particleboard from kenaf core was prepared by steam-injection hot pressing technology and conventional hot pressing technology respectively, and temperature variations of mat core layer was tested by thermocouple during hot-pressing process, density profile of binderless particleboard was tested by isotopic density tester, the effect of two ...
null Zheng Xia, Jian-ying Xu
openaire +1 more source