Results 81 to 90 of about 116 (103)
Some of the next articles are maybe not open access.
Measurement, 2019
Abstract Contact angles quantify the wettability of the rough or smooth surfaces of board materials. The aim of this study was to experimentally verify the Wenzel and Cassie theory and evaluate the essential properties of the binderless bio-composite particleboard fabricated from oil palm trunk and Acacia mangium wood.
Mohammed Danish +7 more
openaire +3 more sources
Abstract Contact angles quantify the wettability of the rough or smooth surfaces of board materials. The aim of this study was to experimentally verify the Wenzel and Cassie theory and evaluate the essential properties of the binderless bio-composite particleboard fabricated from oil palm trunk and Acacia mangium wood.
Mohammed Danish +7 more
openaire +3 more sources
Binderless Particleboard from Steam Exploded Wheat Straw
Advanced Materials Research, 2011Wheat straw is one of the most abundant and cheap lignocellulosic waste materials in the world. Nowadays, field burning is the major practice for removing wheat straw due to lack of effective utilization, but it increases the air pollution and consequently affects public health.
Peng Luo, Chuan Min Yang
openaire +1 more source
Characterization of Rattan Waste for Binderless Particleboard (BPB) Production
Advanced Materials Research, 2015The manufacturing of furniture using rattan is becoming common nowadays, and creates high amount of waste that can be value-added into binderless particleboards (BPB). In order to determine the suitability of the rattan waste for production of BPB, characterization of rattan waste is executed and reported in this paper.
Tajuddin Maisarah +3 more
openaire +1 more source
Physical properties of heat-treated rattan waste binderless particleboard
AIP Conference Proceedings, 2017The objective of this study is to investigate the effects of heat treatment on the properties of binderless particleboard (BPB) fabricated via hot-pressing process with pressing temperature, pressing time and pressing pressure of 180ᴼC, 5 minutes and 1 MPa, respectively.
Maisarah Tajuddin +5 more
openaire +1 more source
Solid State Phenomena, 2020
In this study, the first objective was to investigate the basic mechanical and physical properties of the binderless banana pseudo-stem particleboard (BBP) at a targeted density of 650 kg/m3. The second objective was to examine the effect of laminates on the properties of BBP.
Mohd Ariff Jamaludin +3 more
openaire +1 more source
In this study, the first objective was to investigate the basic mechanical and physical properties of the binderless banana pseudo-stem particleboard (BBP) at a targeted density of 650 kg/m3. The second objective was to examine the effect of laminates on the properties of BBP.
Mohd Ariff Jamaludin +3 more
openaire +1 more source
Production of Binderless Particleboard Using Rice Straw Pretreated with Liquid Hot Water
Applied Mechanics and Materials, 2012Bonding of agricultural lignocellulosic fibers can be improved by liquid hot water pretreatment. This work applied liquid hot water pretreatment to rice straw. The pretreated rice straw was used to make binderless particleboard. The effect of reaction temperature and residence time on the yield of cellulose pulps, chemical composition of rice straw, and
Peng Luo, Chuan Min Yang
openaire +1 more source
Journal of the Indian Academy of Wood Science, 2019
The aims of this study were to evaluate the characteristics of the binderless particleboard made from jabon wood, using several combinations of hydrogen peroxide (H2O2) and ferrous sulfate (FeSO4) in an oxidation process. Jabon wood obtained from a community forest was chipped into particles. The particles were then dried to about 10% moisture content.
A. D. Yunianti +2 more
openaire +1 more source
The aims of this study were to evaluate the characteristics of the binderless particleboard made from jabon wood, using several combinations of hydrogen peroxide (H2O2) and ferrous sulfate (FeSO4) in an oxidation process. Jabon wood obtained from a community forest was chipped into particles. The particles were then dried to about 10% moisture content.
A. D. Yunianti +2 more
openaire +1 more source
Influence of processing parameters on some properties of oil palm trunk binderless particleboard
European Journal of Wood and Wood Products, 2013The objective of the study was to evaluate some properties of experimental binderless particleboards produced from various processing parameters. Three different temperatures (160, 180, 200 °C), two different hot pressing times (15, 20 min) and two different pressures (5, 10 MPa) were applied in manufacturing the binderless particleboard.
Jia Geng Boon +5 more
openaire +1 more source
Properties of jute stick binderless particleboard reinforced with bagasse pith
Journal of the Indian Academy of Wood Science, 2022Ireen Parvin Nitu +4 more
openaire +1 more source
2010 International Conference on Mechanic Automation and Control Engineering, 2010
Binderless particleboard from kenaf core was prepared by steam-injection hot pressing technology and conventional hot pressing technology respectively, and temperature variations of mat core layer was tested by thermocouple during hot-pressing process, density profile of binderless particleboard was tested by isotopic density tester, the effect of two ...
null Zheng Xia, Jian-ying Xu
openaire +1 more source
Binderless particleboard from kenaf core was prepared by steam-injection hot pressing technology and conventional hot pressing technology respectively, and temperature variations of mat core layer was tested by thermocouple during hot-pressing process, density profile of binderless particleboard was tested by isotopic density tester, the effect of two ...
null Zheng Xia, Jian-ying Xu
openaire +1 more source