Results 61 to 70 of about 599,200 (171)
Within developing countries, there is an appeal to use waste biomass for energy generation in the form of bio-briquettes. This study investigated the potential use of bio-briquettes that are produced from the waste biomass of the following tropical ...
Anna Brunerová +5 more
doaj +1 more source
Bio‐based polymer composites were 3D printed by LCD vat photopolymerization using acrylate epoxidized soybean oil as the monomer and isobornyl methacrylate as the reactive diluent. Two different poplar powders derived from plywood processing waste were incorporated within the photocurable formulations.
Francesca Sacchi +7 more
wiley +1 more source
The study evaluates mill scale‐based briquettes, which meet industrial standards for shatter strength and exhibit a low decrepitation index. Despite their limited reducibility in nonisothermal reduction experiments, softening and melting results indicate potential application as a substitute for conventional acidic iron‐bearing materials for use in ...
Ismael Vemdrame Flores +4 more
wiley +1 more source
งานวิจัยนี้เป็นการพัฒนาเชื้อเพลิงชีวมวลอัดแท่งจากเปลือกสับปะรดผสมซังข้าวโพดเปรียบเทียบกับการใช้ซังข้าวโพดอย่างเดียว การศึกษาแบ่งออกเป็น 2 ส่วนหลัก ได้แก่ 1) ศึกษาความเหมาะสมของการอัดแท่งเชื้อเพลิงและทำการศึกษาความเหมาะสมทางเทคนิคซึ่งประกอบด้วยการวิเคราะห์
Srithiang, Kanokpong; Faculty of Sciences and Agricultural Technology, Rajamangala University of Technology Lanna, Chiang Rai
core +1 more source
Abstract Advancements in biofuel production technologies are essential for reducing global dependence on fossil fuels and addressing their overexploitation. Many valuable components of biomass, such as cellulose, hemicellulose, and lignin, remain underused in traditional biorefineries, which typically rely on a single feedstock to produce a primary ...
Marcos Paulo Patta Granado +5 more
wiley +1 more source
Characterization of woodstove briquettes from torrefied biomass and coal
Using waste biomass materials offers the potential to reduce the greenhouse gas emissions from fossil fuels. Torrefaction is very useful for improving the fuel properties of biomass in order to better match those of coal.
Yazhenskikh, Elena +8 more
core +1 more source
Biocarbon Suitability Evaluation for Direct Injection in Blast Furnace Ironmaking
This study examines densified biocarbon for direct injection in blast furnace ironmaking to reduce greenhouse gas (GHG). Enhanced burnout performance, along with favorable reactivity and carbon structure of the combustion residue, supports its suitability for blast furnace injection. Modeling results indicate that up to a 27% reduction in GHG emissions
Xianai Huang +3 more
wiley +1 more source
We tested whether anaerobic digesters could operate at lower temperatures without losing methane production. Pilot‐scale reactors were run at 48°C or 55°C. Methane yields and gas quality were similar. Lower temperatures reduced volatile fatty acids and supported more diverse microbial communities.
Richard K. Tennant +10 more
wiley +1 more source
Production and Characterization of Coal-Biomass Briquettes
Roll press briquetting of coal-biomass mixtures presents a significant opportunity to address feedstock challenges associated with co-utilization of coal and biomass in existing coal-fired facilities.
Dohm, Erich David
core
Efficient utilization of biomass requires conversion into forms that can be optimally applied in energy generation. Briquetting involves the compaction of biomass into solid blocks that are more efficient than raw biomass, and provides ease of transport ...
Joseph Ifeolu Orisaleye +5 more
doaj +1 more source

