Results 81 to 90 of about 251,480 (174)

Some peculiarities of bitumen emulsion modification

open access: yesChemical Bulletin of Kazakh National University, 2013
Polymer modification of bitumen emulsions obtained from bitumen of domestic production with the use of several commercial emulsifiers was studied. The influence of the polymer modifier concentration on bitumen emulsion physical-mechanical properties was considered.
A. Batyrbayev   +2 more
openaire   +2 more sources

Investigation of influential factors on the tensile strength of cold recycled mixture with bitumen emulsion due to moisture conditioning

open access: yesJournal of Traffic and Transportation Engineering (English ed. Online), 2017
The present study attempts to investigate the effect of moisture conditioning on the indirect tensile strength (ITS) of cold recycled mixture with bitumen emulsion. Firstly, samples were prepared using a Superpave gyratory compactor.
Mouhamed Bayane Bouraima, Yanjun Qiu
doaj   +1 more source

The Impact of Long-Time Chemical Bonds in Mineral-Cement-Emulsion Mixtures on Stiffness Modulus

open access: yesThe Baltic Journal of Road and Bridge Engineering, 2018
Deep cold in-place recycling is the most popular method of reuse of existing old and deteriorated asphalt layers of road pavements. In Poland, in most cases, the Mineral-Cement-Emulsion mixture technology is used, but there are also applications ...
Bohdan Dołżycki   +2 more
doaj   +1 more source

Polymer powder-modified mineral-cement mixture with bitumen emulsion

open access: yesRoads and Bridges
The article presents the impact of a polymer modifier (P) on the properties of mineral-cement-emulsion (MCE) mixes. The theoretical part of the article discusses the ways of producing mixes using deep cold recycling.
Przemysław Buczyński   +4 more
doaj   +1 more source

Modeling of Fatigue-Strength Development in Cold-Emulsion Asphalt Mixtures Using Maturity Method

open access: yesApplied Sciences, 2019
Emulsion asphalts are cost-effective, environmentally friendly, and sustainable alternatives to hot-mix asphalts. Laboratory curing protocols currently used to simulate field curing of emulsion asphalts have been observed to offer conflicting predictions.
Kiplagat Chelelgo   +2 more
doaj   +1 more source

Reducing the Environmental Impact of Asphalt Emulsion Production from Petroleum Bitumen utilizing Buton Island Natural Asphalt in Various Scenarios

open access: yesEngineering, Technology & Applied Science Research
By utilizing Buton asphalt as the solid component in the creation of emulsified asphalt, a substantial amount of petroleum bitumen, which is a finite energy resource, can be reduced.
M. Tumpu   +2 more
semanticscholar   +1 more source

Sustainable Porous Asphalt Mixtures: Experimental Laboratory Application with Recycled Aggregates, Cement and Bitumen Emulsion

open access: yesInternational Journal of Pavement Research and Technology
The road sector seeks eco-friendly alternatives to traditional hot mix asphalt due to climate change concerns. Cold mix asphalt technology offers an effective solution by producing asphalt concrete without heating, using a low-viscosity asphalt binder ...
B. De Pascale   +3 more
semanticscholar   +1 more source

Moisture migration characterization of bitumen emulsion-based cold in-place recycling mixture over curing

open access: yesMaterials Structure, 2023
Jiwang Jiang   +5 more
semanticscholar   +1 more source

Study of the Viscoelastic Performance of Cold Recycling Mixtures with Bitumen Emulsion

open access: yesApplied Sciences
To limit reflective cracking in asphalt pavements with cold-recycled base courses, cold recycling mixtures (CRMs) are designed to provide predominantly bituminous bonding, making their viscoelastic behaviour of paramount importance.
Katarzyna Konieczna   +2 more
doaj   +1 more source

Rheological properties of cold recycled mixtures [PDF]

open access: yesActa Montanistica Slovaca, 2007
The paper presents some of the results of research focused on cold recycled mixtures properties. Within the study, eight mixtures with a different amount of reclaimed asphalt, bitumen emulsion and cement were evaluated.
Ján Gillinger
doaj  

Home - About - Disclaimer - Privacy