Results 211 to 220 of about 37,827 (316)

Lithium Metal Anode Fabrication: Methods, Challenges, and Strategies

EcoEnergy, EarlyView.
Schematic illustration of four representative fabrication techniques for thin lithium metal anodes: extrusion, molten lithium infusion, electroplating, and physical vapor deposition (PVD). ABSTRACT The pursuit of ultra‐high energy‐dense lithium‐metal batteries (LMBs) has reignited the drive to fabricate ultrathin high‐quality lithium metal anodes. This
Ji Hyun Baek, Mi Ji Kang, Ho Won Jang
wiley   +1 more source

Evaluating Seismic Resistance and Energy Dissipation of CFRP‐Reinforced Concrete Frames Under Monotonic Loading

Earthquake Engineering and Resilience, EarlyView.
“It was found that good ductility can be achieved in CFRP‐strengthened frames, and this result was validated through experimental testing.” ABSTRACT Reinforced concrete structures are increasingly vulnerable to deterioration by steel reinforcement corrosion, resulting in severe loss of fracture strength and service life, particularly in severe ...
Moab Maidi, Gili Lifshits Sherzer, Erez Gal   +2 more
wiley   +1 more source

Shaking Table Tests and Numerical Analysis of Rocking Vault‐Shaped Segmental Piers Equipped With an Annular Double Sliding System

Earthquake Engineering &Structural Dynamics, EarlyView.
ABSTRACT To enhance the structural robustness of bridges, a rocking arch‐shaped segmental pier with a double sliding system was previously proposed as a low‐cost solution to protect bridges in developing countries. The rocking behavior is triggered by halting the sliding motion, which increases the horizontal load‐bearing capacity and limits ...
Shengming Feng, Mitsuyoshi Akiyama, Shintaro Kobayashi, Ryosuke Kato, Elisa Vitolo, Hirokazu Takahashi, Shun Arima   +6 more
wiley   +1 more source

Full‐scale Shaking Table Tests on a 10‐story Steel Moment‐resisting Frame Building with Buckling‐restrained Braces

Earthquake Engineering &Structural Dynamics, EarlyView.
ABSTRACT In February 2023, a comprehensive series of shaking table tests were conducted at the E‐Defense facility, the world's largest three‐dimensional earthquake simulator, on a full‐scale 10‐story steel moment‐resisting frame supplemented with BRBs.
Jun Fujiwara, Jialiang Jin, Jionghui Li, Tianhao Yan, Ryota Nishi, Akiko Kishida, Koichi Kajiwara, Takuya Nagae, Taichiro Okazaki, Tatsuya Asai   +9 more
wiley   +1 more source

Concept, Tests, and Optimum Design of Novel Negative Stiffness Friction Dampers for Seismic Protection of Long‐Span Bridges

Earthquake Engineering &Structural Dynamics, EarlyView.
ABSTRACT Viscous dampers (VDs) are widely used to mitigate the excessive responses of long‐span bridges. However, VDs face some intricate challenges in engineering practices, including high damping coefficient requirement, potential base shear amplification and tremendous damping force under high velocity. To address these issues, this study develops a
Ruisheng Ma, Shaodong Jiang, Kun Xu, Qiang Han, Xiuli Du, Kaiming Bi   +5 more
wiley   +1 more source

Applied Element Modelling of Out‐Of‐Plane Instability in Boundary Elements of Thin RC Walls

Earthquake Engineering &Structural Dynamics, EarlyView.
ABSTRACT Recent earthquakes in Chile (2010) and New Zealand (2011) caused extensive damage to buildings featuring reinforced concrete (RC) structural walls, with observed failure modes including out‐of‐plane instability of slender walls. This buckling‐type response under combined in‐plane and out‐of‐plane loading has also been documented in ...
Andrea Orgnoni, Rui Pinho, João Pacheco de Almeida   +2 more
wiley   +1 more source

Effect of Ammonium Polyphosphate/Silicate Content on the Postfire Mechanics of Epoxy Glass‐Fiber Composites Using Facile Chocolate Bar‐Inspired Structures

Fire and Materials, Volume 49, Issue 3, Page 329-346, April 2025.
ABSTRACT This study investigates the postfire mechanical properties of epoxy glass‐fiber reinforced composites (EP GFRCs) using increasing concentrations of ammonium polyphosphate (APP) and inorganic silicate (InSi) to modify the char and fire residue.
Sruthi Sunder, Maria Jauregui Rozo, Sneha Inasu, Dietmar Meinel, Bernhard Schartel, Holger Ruckdäschel   +5 more
wiley   +1 more source

Mechanical Behaviour of Vacuum‐Infused GFRP Composites at Elevated Temperatures—Influence of Fibre Architecture

Fire and Materials, EarlyView.
ABSTRACT This study addresses the influence of fibre architecture on the mechanical properties of vacuum‐infused glass fibre reinforced polymer (GFRP) composites at elevated temperatures (ET). Laminates with three different fibre configurations—unidirectional (UD), bidirectional 0°/90° cross‐ply (BD), and ±45° off‐axis angle‐ply (OA) – were tested in ...
Eloísa Castilho, João P. Firmo, Mário Garrido, João R. Correia, Afonso Ataíde   +4 more
wiley   +1 more source

Programmable crack dynamics engineering enables flexible strain sensors with high linearity

FlexMat, EarlyView.
First‐decoupling theoretical framework of crack evolution elucidating the control methods, mechanistic insights, and structure‐activity relationships is established. Crack propagation from uncontrollable randomness systematically evolves into spatially ordered states.
Chunjin Wu, Shaolong Wang, Xu Wang, Heng Zhu, Yongliang Tian, Xinchen Jiang, Xin Rao, Yutong Han, Changrun Wang, Wen‐Yong Lai   +9 more
wiley   +1 more source

Modular stayed 3D-lattice structures manufactured by MEX-AM: buckling behaviour and energy absorption. [PDF]

Sci Rep
Ou Y, Yousif A, Haroske T, Thiele M, Panjalipoursangari N, Völlmecke C.   +5 more
europepmc   +1 more source