Results 241 to 250 of about 2,919,349 (288)
Some of the next articles are maybe not open access.

Inelastic Buckling of Rings with Residual Stresses

Journal of the Engineering Mechanics Division, 1973
Circular rings are commonly fabricated by cold rolling long straight bars of desired cross sections to the required radii and then completing them with a single butt weld. This process induces significant amount of residual stress in a ring which affects its in-service performance.
Subhash C. Anand, Alvin R. Griffith
openaire   +1 more source

Stress, buckling and vibration of prismatic shells

9th Aerospace Sciences Meeting, 1971
A computer code for the general treatment of complex shells of revolution is applied to the analysis of prismatic shells such as oval cylinders, corrugated sheets, and longitudinally stiffened cylinders with stringer discreteness retained in the model.
openaire   +1 more source

Stress, Vibration, and Buckling of Multilayered Cylinders

Journal of Structural Engineering, 1989
An efficient computational method for lowering the cost of the free vibration, stress, and buckling analyses of multilayered composite cylinders is presented. The analytical methodology is based on the linear three-dimensional theory of elasticity where the cylinders are assumed to have simply supported curved edges, and the fibers of the different ...
Ahmed K. Noor, Jeanne M. Peters
openaire   +1 more source

Stresses in rock outside buckled layers

International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1979
Abstract The author presents a theory of folding stresses in rocks, based on assumption of elastic equilibrium or slow viscous flow and a known fold geometry. The theory was first formulated in 1960–1961 and applied in practical problems. At this stage the general form of the solution is derived, applicable to arbitrary fold configurations.
openaire   +2 more sources

STRESS, BUCKLING, AND VIBRATION OF HYBRID BODIES OF REVOLUTION

17th Structures, Structural Dynamics, and Materials Conference, 1976
Abstract The analysis is applicable to bodies of revolution composed of thin shell segments, thick segments and discrete rings. The thin shell segments are discretized by the finite difference energy method and the thick or solid segments are treated as assemblages of 8-node isoparametric quadrilateral finite elements of revolution.
openaire   +2 more sources

Buckling Stress States of Cylindrical Shells

Journal of the Structural Division, 1974
Plexiglass cylindrical shell models with nearly perfect geometry and constant thickness were tested under various combinations of membrane stresses. In cylinders under axial compression alone and axial compression with internal pressure, the buckling procedure was initiated by means of a small dynamic disturbance which reduced the dispersion of the ...
openaire   +1 more source

Simultaneous contraction and buckling of stress fibers in individual cells

Journal of Cellular Biochemistry, 2012
AbstractIt has been proposed that buckling of actin stress fibers (SFs) may be associated with their disassembly. However, much of the detail remains unknown partly because the use of an elastic membrane sheet, conventionally necessary for inducing SF buckling with a mechanical compression to adherent cells, may limit high quality and quick imaging of ...
Shinji, Deguchi   +2 more
openaire   +2 more sources

SHEAR BUCKLING OF THIN PLATES WITH CONSTANT IN-PLANE STRESSES

International Journal of Structural Stability and Dynamics, 2007
This work presents highly accurate numerical calculations of the buckling loads for thin elastic rectangular plates with known constant in-plane stresses, and in-plane shear loading that is increased until the critical load is obtained and the plate losses its stability. The solutions are obtained using the multi-term extended Kantorovich method.
Igor Shufrin, Moshe Eisenberger
openaire   +1 more source

Effect of Residual Stresses on Buckling Localization in a Cylindrical Panel

AIAA Journal, 2000
Localization, in the sense of a more or less abrupt change from a smoothly varying deformation pattern to a pattern involving one or more regions of highly localized deformation, occurs in a wide variety of circumstances, including shear band localizations in structural metals, rocks, and concrete and localized tearing in sheet forming operations.
V. Tvergaard, A. Needleman
openaire   +1 more source

Shape Optimization with Buckling and Stress Constraints

AIAA Journal, 1996
Design variables control the shape of boundaries, holes, and cutouts. Internal mesh points move as the boundaries move using the static displacements of an auxiliairy model. A parametric modeling approach is used to define the complete problem, which includes fully automatic mesh generation to create the finite element mesh. A commercial finite element
openaire   +1 more source

Home - About - Disclaimer - Privacy