Results 41 to 50 of about 642,117 (232)

Hawaii Deep Water Cable Program federally funded - phase II : test cable selection [PDF]

, 1985
The cable selection task is another step towards accomplishing the goals and objectives of the Hawaii Deep Water Cable (HDWC) Program. The primary purpose of this task is the selection of a cable that best meets the Program's system and subsystem ...
The Ralph M. Parsons Company DBA Parsons Hawaii
core   +2 more sources

Transient Overvoltages in Onshore HVDC Cable Joints: Surge Reflections and the Influence of Grounding Configurations

High Voltage
This study examines transient overvoltage phenomena in 525 kV high‐voltage direct current (HVDC) onshore cable systems, with particular emphasis on the influence of grounding configurations in two joint types: straight‐through and screen‐separated ...
Tanumay Karmokar, Roland Dongping Zhang, Mohamad Ghaffarian Niasar, Marjan Popov   +3 more
doaj   +1 more source

Development of electrically conductive polymer nanocomposites for the automotive cable industry

Polímeros, 2021
Environmental concerns and the urgent need for reduction of fossil fuel consumption motivate materials research towards increased transportation efficiency.
Miguel Guerreiro, Joana Rompante, André Costa Leite, Luís Paulo Fernandes, Rosa Maria Santos, Maria Conceição Paiva, José António Covas   +6 more
doaj   +1 more source

Density Measurement of Irradiated and Nonirradiated Zirconium Oxide by Ptychographic X‐Ray Computed Tomography (PXCT)

Advanced Engineering Materials, EarlyView.
Mass density governs the protective behavior of oxide layers on nuclear fuel cladding. Ptychographic X‐ray computed tomography measures zirconium oxide grown on Zircaloy‐4 under reactor and autoclave conditions, revealing nearly identical bulk densities of 5.1 ± 0.80 g cm−3.
Okan Yetik, Liliana I. Duarte, Malgorzata G. Makowska, Roland Brütsch, Andrej Bullemer, Ana Diaz, Mirko Holler, Andreas Menzel, Johannes Bertsch, Pavel Trtik   +9 more
wiley   +1 more source

Long-Term Permissible Load Currents of Single-Core Cables with a Voltage of 10 kV with Cross-Linked Polyethylene Insulation of Various Designs

Известия высших учебных заведений и энергетических объединенний СНГ: Энергетика
There is a large number of factors that affect the long-term permissible load currents of power cables, including environmental conditions, the method of laying, as well as the geometric, thermal and electrical characteristics of the cable structure. The
M. E. Vysotski
doaj   +1 more source

Inverse Identification of Energy‐Dependent Laser Absorptivity in NiTi Laser Powder‐Bed Fusion via Calibrated Melt Pool Simulation

Advanced Engineering Materials, EarlyView.
A combined experimental–computational framework identifies energy‐dependent laser absorptivity for NiTi in laser powder‐bed fusion, applicable to conduction and transition modes. Single‐track experiments and thermofluid smoothed particle hydrodynamics simulations are coupled through inverse analysis of melt pool geometry.
Mohamadreza Afrasiabi, Hadi Moutablaleh, Ignatius A. Setiawan, Mehrshad Mehrpouya   +3 more
wiley   +1 more source

Influence of Scan Strategies in Electron Beam Powder Bed Fusion on Solidification, Microstructure, and High‐Temperature Compressive Properties of γ′‐Strengthened Inconel 738LC

Advanced Engineering Materials, EarlyView.
Experiments and thermophysical simulations were conducted to investigate the electron beam powder bed fusion electron beam (PBF‐EB/M) process for the γ′‐strengthened nickel‐based superalloy Inconel 738LC. The results demonstrate the impact of process‐induced microstructural variations on high‐temperature mechanical behavior, providing a basis for ...
Jan Niklas Petenati, Karthik Kumar Banku, Prasanth Bondi, Ivan Zhirnov, Yangyiwei Yang, Gordon Schmidt, Jürgen Christen, Georg Hasemann, Manja Krüger, Bai‐Xiang Xu, Bilal Gökce, Silja‐Katharina Rittinghaus   +11 more
wiley   +1 more source

Investigating the Effect of Inclination Angle and the Influence of Scan Parameters on the Appearance and Thermal and Mechanical Properties of Filigree Tension Rods of LPBF‐Manufactured NiTi Shape‐Memory Alloys

Advanced Engineering Materials, EarlyView.
This article investigates the dependence of the properties on the manufacturing orientation in the form of the inclination angle to the build plate of LPBF‐fabricated NiTi rods with a diameter of 150–220 µm. Metallographic, chemical, thermal, and mechanical characterization show behavior under identical manufacturing conditions that ranges from ...
Sandra Herzig, Michael Werner, Christian Rotsch   +2 more
wiley   +1 more source

Design of a Multistable Finger Prosthesis with Programmable Metamaterials

Advanced Engineering Materials, EarlyView.
This research article shows the development of a multistable programmble metamaterial for the use as a finger prosthesis. The material was designed on different hierarchical levels where the influence of geometrical parameters and combination of mechanical elements was explored.
Franziska Wenz, Jannik Krohn, Alexander Leichner, Dilip Chalissery, Heiko Andrae, Chris Eberl   +5 more
wiley   +1 more source

Fabrication Routes for Ionic Conducting Fiber Strain Sensors

Advanced Engineering Materials, EarlyView.
Ionic conducting fiber strain sensors (ICFSs) offer compliant, textile‐integrable sensing. Thus far, the commercialization of ICFSs has been constrained by fiber fabrication routes. This review provides a fabrication‐centric analysis of ICFSs correlating processing strategies with material properties and scalability.
Leo John Kershaw, Zhanhong Yang, Anne Ladegaard Skov, Magdalena Skowyra   +3 more
wiley   +1 more source