Results 1 to 10 of about 789,390 (184)

Stabilization of Shield Muck Treated with Calcium Carbide Slag–Fly Ash

open access: yesBuildings, 2023
Solidifying shield muck with calcium carbide slag and fly ash as curing agents was proposed as a highly efficient method for reusing waste shield muck.
Jinzhe Wang   +3 more
doaj   +3 more sources

Preparation and adsorption properties of microsphere geopolymers derived from calcium carbide slag and fly ash [PDF]

open access: yesScientific Reports
In this work, using fly ash and calcium carbide slag as mixed precursors, hydrogen peroxide and sodium dodecyl sulfate as mixed foaming agents, porous microsphere geopolymer was prepared by suspension curing technology to remove Cu (II) from aqueous ...
Yinnian Liao   +6 more
doaj   +5 more sources

Preparation of alkali-activated oil shale residue-slag geopolymer-based binder using calcium carbide slag and sodium carbonate as alkali activator. [PDF]

open access: yesPLoS ONE
Based on the reuse of industrial solid wastes such as calcium carbide slag, slag, and oil shale residue, this work utilizes oil shale residue and slag as precursor materials, calcium carbide slag and sodium carbonate as alkaline activator to prepare a ...
Chenchen Luo, Bo Zheng, Yi Li, Qiao Yang
doaj   +3 more sources

Study on carbonation behavior and carbon footprint of steel slag-calcium carbide slag-desulfurization gypsum composite system [PDF]

open access: yesScientific Reports
The carbonation of steel slag (SS) can enhance its performance while capturing CO2. The synergistic effect of combining multi-solid waste materials improves SS’s carbon sequestration efficiency, thereby contributing to reduce carbon emissions. This study
Kang Wang   +5 more
doaj   +4 more sources

Preparation of a novel composite geopolymer based on calcium carbide slag-fly ash and its characterization, mechanism and adsorption properties

open access: yesWater Science and Technology, 2022
In this study, a mixed precursor system of fly ash (50 wt%) and calcium carbide slag (50 wt%) was used to prepare a geopolymer, and the hydration and hardening mechanism of the whole system and the microscopic characterization of the calcium carbide-fly ...
Xiaoqing Ma   +4 more
doaj   +3 more sources

Research on the Performance of Calcium Carbide Slag–Fly Ash Stabilized Soil

open access: yesAdvances in Civil Engineering, 2023
To address the scarcity of lime resources, this study explores the potential of using industrial solid waste, including fly ash (FA) and carbide slag, as replacements for lime or cement in soil stabilization for roadbed construction.
Yanxia Cai   +6 more
doaj   +2 more sources

Calcium waste as a catalyst in the transesterification for demanding esters: scalability perspective [PDF]

open access: yesBeilstein Journal of Organic Chemistry
Esters are valuable compounds in fine organic synthesis and industry. The significant growth in the demand for esters requires the development of scalable production methods.
Anton N. Potorochenko   +1 more
doaj   +2 more sources

Formation mechanism of carbide slag composite sustained-alkalinity-release particles for the source control of acid mine drainage

open access: yesScientific Reports, 2021
Acid mine drainage (AMD) has caused serious and long-lasting damage to the environment in many countries. Preventing AMD formation at the source is considered the most direct and effective method of remediation.
Jichi Bai, Haiqin Zhang, Liping Xiao
doaj   +1 more source

Decay on Cyclic CO2 Capture Performance of Calcium-Based Sorbents Derived from Wasted Precursors in Multicycles

open access: yesEnergies, 2022
In order to obtain the cheap waste calcium-based sorbent, three wasted CaCO3 precursors, namely carbide slag, chicken eggshells, and analytical reagent-grade calcium carbonate, were selected and prepared at 700 °C to form calcium-based sorbents for CO2 ...
Dehong Gong, Zhongxiao Zhang, Ting Zhao
doaj   +1 more source

The experience of using calcium carbide for the deoxidation of steel to replace aluminum in the conditions of OJSC «BSW – Management company of the holding «BMC»

open access: yesЛитьë и металлургия, 2020
The article deals with issues related to the use of calcium carbide in steelmaking, instead of secondary aluminum and other deoxidizing materials, in order to reduce the cost of deoxidizing steel and slag.It was assumed that reducing the content of ...
О. M. Grudnitsky
doaj   +1 more source

Home - About - Disclaimer - Privacy