Results 1 to 10 of about 36,648 (255)
Journal of Materials Research and Technology, 2021 In addition to dispersed nanoparticles in the binder phase, the effect of Ni3Al on the growth mechanism of tungsten carbide (WC) grains is also essential for the fabrication of high-quality of cemented carbides.
Yingbiao Peng +6 more
doaj +1 more source
Prediction the Initiation of Pitting Corrosion Depending on Carbides in the Microstructure of 304 Stainless Steel [PDF]
Engineering and Technology Journal, 2017 Stainless steel has excellent corrosion resistance due to formation oxides protective films in many environments. When steel exposed to temperature in the range of (500-900) ºC, the carbon in the structure will be effective to react with chromium in the ...
S. I.Alrubaiey, Sh. F.Hasan
doaj +1 more source
Modification of cast alloys nanostructured material
Литьë и металлургия, 2021 The third article of the series devoted to the application of nanomaterials and nanotechnologies in industry in general and, first of all, in metallurgy, materials science and foundry is presented. This article deals with the use of nanomaterials for the
P. A. Vitiaz +4 more
doaj +1 more source
WEAR RESISTANCE OF MULTI-COMPONENT COMPOSITE COATINGS APPLIED BY CONCENTRATING ENERGY FLOWS [PDF]
Proceedings on Engineering Sciences, 2019 In this work are presented the results of comparative tests of the abrasion wear characteristics and the wear resistance of new coatings from multi-component composite materials.
M. KANDEVA +4 more
doaj +1 more source
The effect of boron on the amount and type of carbides in chromium white irons [PDF]
Journal of the Serbian Chemical Society, 2002 The effect of boron, in the amounts of 0.26, 0.39, and 0.59 wt.%, on the volume fraction and structure of carbides in Cr white irons was examined. It was demonstrated that the addition of boron can change the microstructural characteristics of white iron
Tomović-Petrović Stanka M. +2 more
doaj +1 more source
Secondary Hardness and Heat Resistance of High-Speed Steels
Успехи физики металлов, 2020 This paper presents the research results concerning factors affecting the secondary hardness and heat resistance of high-speed steels. Processing parameters making possible to achieve the necessary levels of heat resistance and hardness are considered ...
O. V. Movchan, K. O. Chornoivanenko
doaj +1 more source
Metals, 2023 In this paper, through high-temperature tensile tests of 55NiCrMoV7 steel, high-temperature fracture behavior, microstructure evolution, and carbide distribution characteristics of both the thermal–mechanical coupling zone (fracture zone) and thermal ...
Yasha Yuan +4 more
doaj +1 more source
Materials Research Express, 2021 Co–Cr–W alloys were widely used in the inlet exhaust valve of aeroengine. However, the traditional manufacturing process of Co–Cr–W alloys can not meet the demand for higher comprehensive performance, and an optimum method needs to be developed.
S Y Wang +7 more
doaj +1 more source
Aging Phenomena during In-Service Creep Exposure of Heat-Resistant Steels
Metals, 2019 An investigation of aging phenomena during creep exposure has been conducted for HP-Nb cast reformer tubes for several exposure conditions. Aging was manifested by carbide precipitation, carbide coarsening, and carbide transformation.
G. N. Haidemenopoulos +7 more
doaj +1 more source
Metals, 2022 Ledeburitic tool steel X210Cr12 was processed by passing through a semi-solid state with subsequent forming on a hydraulic press, thus achieving a fine-grained martensitic matrix, uniformly dispersed fine precipitates, and removal of sharp-edged primary ...
Hana Jirková +4 more
doaj +1 more source