Results 71 to 80 of about 15,502 (266)

An Oxygen Sensor based on Electrospun Carbon Nanofibers Modified with Pd Particles

International Journal of Electrochemical Science, 2018
Electrospun carbon nanofibers modified with Pd sensors have been developed for O2 sensing with high sensitivity. The average diameter of carbon nanofiber and Pd particle is about 251 and 20.5 nm, respectively. The sensing performances of the Pd decorated
Yu-Ching Weng, Zhao-Nan Wang, Shu-Yii Wu
doaj   +1 more source

Temperature dependence of carbon nanofiber resistance

Nanotechnology, 2010
Transport properties under current stress are examined for a carbon nanofiber (CNF) on an insulating substrate between tungsten-deposited gold electrodes. The temperature dependence of CNF resistance is determined based on our previously reported heat transport model. The measured devices exhibit a thermal activation behavior, suggesting transport in a
Yamada, Toshishige, Yabutani, Hisashi, Saito, Tsutomu, Yang, Cary Y.   +3 more
openaire   +3 more sources

Testing and Simulation of Multilayer Polyvinylidene Fluoride‐Based Piezoelectric Energy Harvester Devices

Advanced Materials Technologies, EarlyView.
The study considers the use of polymer/dielectric‐based multilayers piezoelectric Energy Harvesters (EH) to produce an output voltage and current, by exploiting the mechanical energy provided by human organs movements. In particular, the heart motion is considered from the kinematic viewpoint, and a multiphysics theoretical model is developed to assess
Hamdi Ezzin, Silvia Monchetti, Paolo Emilio Puddu, Luciano Teresi, Antonio DeSimone, Roberto Brighenti   +5 more
wiley   +1 more source

Scaling up the Fabrication of Mechanically-Robust Carbon Nanofiber Foams

Fibers, 2016
This work aimed to identify and address the main challenges associated with fabricating large samples of carbon foams composed of interwoven networks of carbon nanofibers. Solutions to two difficulties related with the process of fabricating carbon foams,
William Curtin, Pedro J. Arias-Monje, Charliean Dominguez, Jonathan Phillips, Claudia C. Luhrs   +4 more
doaj   +1 more source

Extrusion Bioprinting for Wound Healing: Innovations in Functionalized Bioinks and Bioprinting Technology

Advanced Materials Technologies, EarlyView.
Extrusion‐based bioprinting (EBB) has emerged as a versatile biofabrication platform capable of precisely depositing bioinks composed of biomaterials, cells, and bioactive agents to generate patient‐specific, biomimetic skin constructs. This paper presents a state‐of‐the‐art and forward‐looking overview of EBB for wound healing, encompassing printing ...
Hien‐Phuong Le, Anh Tuan Trong Tran, Ammara Waheed, Tran Thanh Tung, Dusan Losic   +4 more
wiley   +1 more source

Electrospun Ni-doped ZnO nanofiber coatings on carbon fabric for enhanced electromagnetic interference shielding

Scientific Reports
Electromagnetic interference (EMI) is a critical concern in aerospace and defense applications, where lightweight structural composites must provide effective shielding against high-frequency electromagnetic (EM) radiation. In this work, Ni-doped ZnO (Ni-
R. Suresha, Jagadeesh R. B. Chandra, Niranjan N. Prabhu, H. K. Sachidananda, Gibin George, Sampath Parasuram, B. Shivamurthy   +6 more
doaj   +1 more source

Nature‐Derived Chitosan Biopolymer: A Promising Candidate for Sustainable Electronics

Advanced Materials Technologies, EarlyView.
In the creation of environmentally friendly devices, nature‐derived chitosan biopolymer is a promising contender for sustainable electronic research. It can be utilized to create more ecologically friendly scalable gadgets and has a variety of uses in different active layers of electronics.
Joshua McDonald, Ali Nawaz, Amandeep Singh, Prashant Sonar   +3 more
wiley   +1 more source

Investigating Impact of The Interfacial Debonding on The Mechanical Propertiesof NanoFiber Reinforced Composites [PDF]

Журнал нано- та електронної фізики, 2014
This work investigates the influence of the interfacial debonding in a nanofiber reinforced composite on the mechanical properties. Mainly, three dimensional-axisymmetric finite element analysis is adopted to study a representative volume element (RVE ...
Waleed.K. Ahmed
doaj  

Wood‐Derived Nanocellulose‐Biocarbon Fresnel‐Zone Plate Lenses for Sub‐THz Frequency Applications

Advanced Materials Technologies, EarlyView.
Wood‐derived nanocellulose and lignin‐based biocarbon were combined to fabricate fully bio‐based Fresnel zone plate (FZP) lenses for sub‐terahertz frequencies. These sustainable FZP lenses exhibit low dielectric loss and high directivity, achieving performance comparable to that of metallic references, and remain functional under environmental stress ...
Riikka Haataja, Mikko Kokkonen, Niina Halonen, Sami Myllymäki, Umair Rafique, Mandeep Singh, Ossi Laitinen, Heli Jantunen, Kristiina Oksman, Henrikki Liimatainen   +9 more
wiley   +1 more source

3D Printing of Soft Robotic Systems: Advances in Fabrication Strategies and Future Trends

Advanced Robotics Research, EarlyView.
Collectively, this review systematically examines 3D‐printed soft robotics, encompassing material selections, function integration, and manufacturing methodologies. Meanwhile, fabrication strategies are analyzed in order of increasing complexity, highlighting persistent challenges with proposed solutions.
Changjiang Liu, Bin Cui, Xumin Huang, Xiaoyu (Rayne) Zheng, T. Thang Vo‐Doan, Ruirui Qiao   +5 more
wiley   +1 more source