Results 211 to 220 of about 2,453 (263)

In-depth modifications of implanted amorphous carbon films

Applied Physics A Solids and Surfaces, 1994
Amorphous carbon films (a-C:H) and nitrogen incorporated carbon films [a-C:H(N)] deposited by a self-bias glow discharge have been implanted with 70 keV nitrogen ions at fluences of 0.6, 1 and 2×1017 N/cm2. The in-depth modifications caused by ion implantation were determined by means of nuclear techniques, such as Rutherford Backscattering ...
FREIRE F.L., ACHETE C.A., FRANCESCHINI D.F., MARIOTTO, Gino   +3 more
openaire   +2 more sources

Pore Structural Changes and Carbonated Depth of Carbonated Steel Slag

Advanced Materials Research, 2011
Steel slag and carbon dioxide were used as raw materials to prepare building material by carbonation. Effects of forming pressure on carbonation of steel slag and carbonated depth were studied by pore structural changes before and after carbonation and carbonated region.
Hao Ze Wu, Jun Chang, Hua Wang
openaire   +1 more source

Measurement of beryllium depth profiles in carbon

Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2004
Abstract This paper is concerned with the measurement of Be diffusion profiles in C by combining RBS and XPS sputter depth profiling. The total Be content in the samples was measured by RBS (2 MeV 4 He + ) at a scattering angle of 102° in order to increase depth resolution and sensitivity for Be.
Schmid, K., Wiltner, A., Linsmeier, C.
openaire   +2 more sources

Depth profiling free carbon in silicon carbide

Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1995
A fingerprint for free carbon was identified from the negative ion mass spectra of various carbon and silicon carbide standards. It was found that high-mass carbon molecular species can be used to distinguish free carbon in silicon carbide. Secondary ion mass spectrometry (SIMS) depth profiling (12 keV Cs+ primary beam, negative SIMS mode) was used to ...
T. E. Paulson, V. J. Bojan, B. M. Wichterman, C. G. Pantano   +3 more
openaire   +1 more source

The experimental investigation of concrete carbonation depth

Cement and Concrete Research, 2006
Abstract Phenolphthalein indicator has traditionally been used to determine the depth of carbonation in concrete. This investigation uses the thermalgravimetric analysis (TGA) method, which tests the concentration distribution of Ca(OH)2 and CaCO3, while the X-ray diffraction analysis (XRDA) tests the intensity distribution of Ca(OH)2 and CaCO3.
Cheng-Feng Chang, Jing-Wen Chen
openaire   +1 more source

Depth indicators in sedimentary carbonates

Marine Geology, 1967
Abstract Determination of depth criteria applicable to the study of ancient limestones can only be based on an understanding of modern carbonate sedimentation. Since oolites and micrites are frequently used as depth criteria in stratigraphic studies, our knowledge of their Recent counterparts is examined in some detail.
openaire   +1 more source

Depth profiling of deuterium in a beryllium/carbon layer

Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1992
Abstract Depth distributions for deuterium trapped within the Be/C layer on a JET limiter after long-term operation have been measured up to a depth of 7 μm using the D(3He, p)4He reaction in a resonance-like technique. For several points along a JET limiter tile, depth profiles and the total amount of trapped deuterium have been determined.
Hughes, I., Behrisch, R., Martinelli, A.
openaire   +2 more sources

Minimal Drilling Technique to Measure Chloride-Penetration Depth and Carbonation Depth in Concrete

Journal of Materials in Civil Engineering, 2020
AbstractA method was investigated to determine concrete durability by measuring the carbonation depth and chloride ion (Cl−) penetration depth.
Shunsei Tanaka, Yuya Sakai
openaire   +1 more source

Tritium depth profiling in carbon by accelerator mass spectrometry

Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1997
Abstract A facility for tritium depth profiling measurements by AMS has been installed at the Rossendorf 3 MV Tandetron. Depth profiles are obtained by mechanical scanning of the sputter sample inside a commercial Cs sputter ion source. The deuterium profiles are obtained simultaneously using the injection magnet for mass separation. First results of
Friedrich, M., Sun, G., Grötzschel, R., Behrisch, R., Garcia-Rosales, C., Roberts, M. L.   +5 more
openaire   +3 more sources

Evaluation of hybrid depth scanning for carbon‐ion radiotherapy

Medical Physics, 2012
Purpose:In radiotherapy with a scanned carbon‐ion beam, its Bragg peak is shifted along the depth direction either by inserting the range shifter plates or by changing the beam‐extraction energy of a synchrotron. In the former technique (range shifter scanning: RS), the range shifter plates broaden the beam size and produce secondary fragments through ...
Taku, Inaniwa, Takuji, Furukawa, Nobuyuki, Kanematsu, Shinichiro, Mori, Kota, Mizushima, Shinji, Sato, Toshiyuki, Toshito, Toshiyuki, Shirai, Koji, Noda   +8 more
openaire   +2 more sources