Results 151 to 160 of about 85,287 (311)
Electron Microscopy Study of the Chemical and Structural Evolution of Lithium-Ion Battery Cathode Materials [PDF]
, 2017 Layered lithium transition metal oxides represent a major type of cathode materials that are widely used in commercial lithium-ion batteries. Nevertheless, these layered cathode materials suffer structural changes during electrochemical cycling that ...
Liu, Hanshuo
core
Advanced Functional Materials, EarlyView.Top‐down organic pillaring expands the interlayer spacing of bulk‐sized MoS2 particles while preserving the bulk morphology. Operando X‐ray diffraction and electrochemical dilatometry show that MoS2‐bulk undergoes solvent co‐intercalation in diglyme electrolyte, causing large structural expansion, while pillared, expanded MoS2 suppresses solvent uptake
Jaehoon Choi +8 more
wiley +1 more source
Advanced Functional Materials, EarlyView.Bandgap‐engineered AlGaAs/GaAs heterostructures exhibit wavelength‐selective dual‐polarity photoelectrochemistry, switching from photocathodic to photoanodic response depending on excitation wavelength. The polarity transition is governed by band‐selective absorption, built‐in electric‐field‐driven carrier transport, and interfacial charge‐transfer ...
Yukai Mao +9 more
wiley +1 more source
Advanced Functional Materials, EarlyView.CuFeS2 is found to induce the formation of intermediate phases, highlighting a strong Cu–Fe synergistic effect during conversion reactions in lithium all‐solid‐state batteries (Li‐SSBs). The integrated reaction pathway effectively suppresses phase separation and accelerates reaction kinetics, leading to enhanced electrochemical reversibility and ...
Changjiang Bai +15 more
wiley +1 more source
Advanced Characterization for Studying Ni-rich Cathode Materials for Li-ion Batteries
Li-ion batteries (LiBs) are energy storage devices which are able to convert chemical energy into electrical energy. Due to the recent excessive consumption of fossil fuels resulted in the uncontrolled release of carbon dioxide and significant amounts of
Colalongo, Mattia
core +1 more source
Advanced Healthcare Materials, EarlyView.An AuNPs/fMWCNT nanocomposite‐modified screen‐printed carbon electrode was engineered via sequential electrodeposition and integrated into a 3D‐printed microfluidic platform for ultrasensitive methylglyoxal detection. The non‐invasive sensing platform enables rapid analysis in saliva and sweat, highlighting strong potential for wearable point‐of‐care ...
Ahadul Amin Soshi +3 more
wiley +1 more source
Crystal Growth Engineering for Dendrite‐Free Zinc Metal Plating
Advanced Materials, EarlyView.This research employed the rare‐earth ion dysprosium (Dy) to modulate aqueous zinc (Zn) metal plating. Integrated multiscale experiments and computational modeling unveiled the preferential adsorption of Dy on specific crystal facets, which activated screw dislocation‐driven Zn growth.
Guifang Zeng +10 more
wiley +1 more source
Fluorinated Hollow Porous Carbon Spheres as High-Performance Cathode Material for Primary Battery
Fluorinated carbon cathode materials have extremely high theoretical specific energy among known cathode materials of lithium primary batteries. Nevertheless, current fluorinated carbon cannot meet the performance demands of future applications due to ...
Yan Zou +5 more
core +1 more source
Advanced Materials, EarlyView.In this work, low bandgap (≈1.55 eV) semitransparent perovskite solar cells (ST‐PSCs) having thin (thickness < ≈100 nm) perovskite layers and transparent conductive oxide‐based rear electrodes are fabricated using vacuum‐deposition methods. Two different ST‐PSCs demonstrated a high light utilization efficiency value of 4.2 (PCE: 9.26% and AVT: 45.3 ...
Abhyuday Paliwal +9 more
wiley +1 more source
POM‐Based Water Splitting Catalyst Under Acid Conditions Driven by Its Assembly on Carbon Nanotubes
Advanced Materials, EarlyView.A newly‐engineered POM‐based electrocatalyst incorporating non‐innocent counter cations exhibits fast kinetics for either the OER or HER under strongly acidic conditions (1 m H2SO4), depending on whether it is assembled on carbon nanotubes (1@CNT) or physically mixed with them (1/CNT). In water‐splitting tests using a two‐electrode setup, these systems
Eugenia P. Quirós‐Díez +8 more
wiley +1 more source