Results 41 to 50 of about 1,267 (161)

Study on the composite fracture characteristics of filling and reinforcing cracked rock mass after high temperature damage

Deep Underground Science and Engineering, EarlyView.
Cement infill shares compressive and shear stresses during loading, while interfacial friction hinders crack propagation and reduces stress concentration, improving the rock's load‐bearing capacity. Failure modes vary with crack inclination. Unfilled specimens show four modes.
Shihao Yuan, Qiang Sun, Jianjun Hu, Liwei Zhang, Jishi Geng   +4 more
wiley   +1 more source

Modeling and experimental validation of bolt–grout bond–slip behavior for deep underground excavation support

Deep Underground Science and Engineering, EarlyView.
A novel shear‐lag model, validated by pull‐out tests, incorporates a constant bond stress stage to predict the complete load–displacement response of grouted rock bolts, providing a new tool for optimizing anchorage length and material toughness in deep underground engineering. Abstract The stability of rock masses in deep underground excavations, such
Wenhui Bian, Xiaohui He, Kexue Wang, Yufei Wu, Guoxin Wang, Shaochen Zhang, Jun Yang   +6 more
wiley   +1 more source

Fracture evolution of a thick soft protection layer and the water inrush mechanism in overburden under longwall mining

Deep Underground Science and Engineering, EarlyView.
Through shear–tensile creep tests and viscoelastic modeling, the fracture evolution of thick soft protective layers is clarified. Results show thickness‐dependent rheological failure modes that govern four types of roof water inrush, providing a mechanism‐based framework for hazard prediction and control. Abstract In the Jurassic coal‐bearing strata of
Mengnan Liu, Wei Qiao, Xianggang Cheng, Xiangsheng Meng, Peichao Feng   +4 more
wiley   +1 more source

Mechanism and disaster control new technology of strong ground pressure manifestation in ultra‐large mining face

Deep Underground Science and Engineering, EarlyView.
In response to the problem of strong mining pressure manifestation along the goaf roadway in a thick coal seam mining area, this study uses a new type of combined blasting roof cutting technology to effectively control the manifestation and deformation of mining pressure along the goaf roadway.
Xiaoding Xu, Manchao He, Jun Yang, Yubing Gao, Qiang Fu, Qing Ma, Yajun Wang   +6 more
wiley   +1 more source

Utilization of Basalt Dust as Waste Material in Cement Grouts for Geothermal Application

Energies, 2022
Research on the utilization of the Earth’s heat focuses mainly on effective sourcing of energy accumulated in rock mass. One of the most important parameters is thermal conductivity, which can be modified using various compositions of cement grouts ...
Krzysztof Seńczuk, Aneta Sapińska-Śliwa, Tomasz Kowalski   +2 more
doaj   +1 more source

Stress Redistribution Mechanisms and Subsidence Control of Fluidized Gangue Backfilling in Underground Coal Mining: Integrated Experimental and Numerical Investigation

Energy Science &Engineering, EarlyView.
Fluidized gangue backfilling controls mining subsidence through stress redistribution in composite backfill‐pillar systems, reducing surface settlement and stress concentrations. Multi‐scale experimental and numerical analysis provides quantitative design parameters for optimizing ground control in sustainable underground coal mining operations ...
Weilong Zhang, Jie Zhang, Yuanzhen Zhang, Wenjing Liu, Liang Li, Deyi Nan, Guannan Zhao, Chen Yang, Haiqing Bian, Hua Shao, Xiao Zuo, Changtai Zhou   +11 more
wiley   +1 more source

Improvement of Shear Strength of Sandy Soil by Cement Grout with Fly Ash

Journal of Engineering, 2018
The effects of the permeation cement grout with fly ash on the sandy soil skeleton were studied in the present work in two phase; first phase the shear strength parameters, and the second phase effect of these grouted materials on volume grouted zone by ...
Haifaa Abdulrasool Ali, Yasir Muyuad Yousuf   +1 more
doaj  

Heat of hydration of Portland cement containing coal-derived char at different temperatures

Results in Materials
The heat of hydration is fundamental in understanding the hydration mechanism of cementitious materials, and temperature can significantly affect the heat of hydration.
Hua Yu, Prayush Jonchhe, Chooikim Lau, Kam Ng   +3 more
doaj   +1 more source

Soil Nail Design Optimization Through Adaptive Slope Stability Analysis Using Improved Limit Equilibrium Method

International Journal for Numerical and Analytical Methods in Geomechanics, EarlyView.
ABSTRACT Design optimization for automatically generating optimal design results is a promising technique for enhancing the efficiency of design processes and outcomes. However, its development for soil nail reinforced slopes is limited since the traditional slope stability analysis using the limit equilibrium method (LEM) becomes relatively time ...
Weihang Ouyang, Kai Liu, Si‐Wei Liu
wiley   +1 more source

Evaluations of the effectiveness of the near‐surface mounted steel materials in strengthening short RC wall‐like columns with openings

Structural Concrete, EarlyView.
Abstract In practice, reinforced concrete (RC) wall‐like columns often have openings to facilitate building services, which creates stress concentrations around the opening, resulting in the weakening of their load‐carrying capacity. This study proposes innovative strengthening methods using near‐surface mounted (NSM) incorporating steel materials to ...
Ahmed Hamoda, Mizan Ahmed, Mohamed Ghalla, Ahmad G. Saad, Aref A. Abadel   +4 more
wiley   +1 more source