Results 41 to 50 of about 23,553 (264)

Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment

Advanced Engineering Materials, EarlyView.
The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin, Samson Dare Oguntuyi, Peter Apata Olubambi   +2 more
wiley   +1 more source

Characterization of Aluminized Layers on Inconel‐738 Alloy: Microstructure, Modeling of Aluminizing Kinetics, and Thermal Behavior

Advanced Engineering Materials, EarlyView.
This study explored how effective nickel aluminide coatings are obtained in providing oxidation resistance applied to the Inconel 738 alloy, modeling with diffusion models. In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C ...
Gozde Celebi Efe, Tuba Yener, Suayb Cagri Yener, Mourad Keddam, Cuma Bindal   +4 more
wiley   +1 more source

HA/β-TCP Biphasic Calcium Phosphate Ceramics Derived From Butterfish Bones Loaded With Bone Marrow Mesenchymal Stem Cells Promote Osteogenesis

Frontiers in Materials, 2022
Biphasic calcium phosphate (BCP) containing hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) is considered the gold standard for bone repair. However, the complex synthesis of BCP restricts the wide application of BCP.
Kehan Deng, Zhixiao Liu, Wenxufe Dou, Qi Cai, Wei Ma, Shaohai Wang   +5 more
doaj   +1 more source

Variable Stiffness Flexure Structures Enabled by Phase‐Change Gallium and Adhesive Interfacial Locking for Soft Robotic Applications

Advanced Engineering Materials, EarlyView.
A flexure‐based variable stiffness structure is developed by integrating phase‐change modulation and adhesive interfacial locking of gallium. The design enables a wide stiffness variability, transitioning from soft, flexible behavior to rigid, load‐supporting performance.
Sungjin Kim, Sohee John Yoon, Yong‐Lae Park   +2 more
wiley   +1 more source

Potential and challenges for Powder Bed Fusion – Laser Beam (PBF-LB) in industrial ceramic additive manufacturing

Open Ceramics
In recent years, ceramic 3D printing has proven its potential for increasing the cost and time efficiency of ceramic manufacturing, especially for customizable products, small series production and for (multi-material) parts with complex design.
Christian Berger, Gabriela Schimo-Aichhorn, Stefan Gronau, Franziska Saft, Sarah Seiringer, Uwe Scheithauer   +5 more
doaj   +1 more source

Reliability and properties of core materials for all-ceramic dental restorations

Japanese Dental Science Review, 2008
Various core materials have been used as all-ceramic dental restorations. Since many foreign zirconia product systems were introduced to the Japanese dental market in the past few years, the researches and the papers on zirconia for ceramic biomaterials ...
Seiji Ban
doaj   +1 more source

Degradation of Ceramic Materials in Thermotechnical Plants

The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science, 2018
It is demonstrated that the degradation of materials is currently a poorly studied scientific area. We propose a definition of degradation and a classification of the types of degradation. It is investigated, using a technical model, the destructive interactions between the ceramic materials of the tundish refractory lining, in a continuous steel ...
Maria NICOLAE, Catalin Stefan GRADINARU, Claudia Ionela DRAGAN, Avram NICOLAE   +3 more
openaire   +1 more source

Microstructural Evolution and Vacancy Defect Formation in Mn–Mo–Ni RPV Steel Under Low Cycle Fatigue: Insights From EBSD and PALS

Advanced Engineering Materials, EarlyView.
Low‐cycle fatigue damage in Mn–Mo–Ni reactor pressure vessel steel is examined using a combined electron backscatter diffraction and positron annihilation lifetime spectroscopy approach. The study correlates texture evolution, dislocation substructure development, and vacancy‐type defect formation across uniform, necked, and fracture regions, providing
Apu Sarkar, Dhanadeep Dutta, G. Bharat Reddy   +2 more
wiley   +1 more source

TiO2-PDMS Super Hydrophilic Coating with Self-Cleaning and Antimicrobial Properties

Jurnal Kimia Sains dan Aplikasi, 2021
In this paper, self-synthesized TiO2 nanoparticle was used as a coating material with the addition of polydimethylsiloxane (PDMS) on the surface of the glass and ceramic substrate via spray coating.
Dessy Ariyanti, Afiatin Afiatin, Pury Diana Shintawati, Aprilina Purbasari   +3 more
doaj   +1 more source

Enhancing Strength and Electrical Conductivity in Al–Zr–Sc Conductor Alloys Through Sn and Sr Microalloying and Two‐Step Aging Treatment

Advanced Engineering Materials, EarlyView.
Trace additions of Sn and Sr combined with a two‐step aging treatment are shown to enhance the microstructure and performance of Al–Zr–Sc conductor alloys. Strength and electrical conductivity increase concurrently through accelerated precipitation of fine Al3(Sc, Zr) precipitates and improved dislocation resistance, offering a cost‐effective pathway ...
Quan Shao, Emad M. Elgallad, Alexandre Maltais, X.‐Grant Chen   +3 more
wiley   +1 more source