Propionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer [PDF]
Iranian Journal of Chemical Engineering, 2018 In this work, extraction of propionic acid from the aqueous phase to the organic phase (1-octanol) was performed in T-junction microchannels and effects of channel diameter and fluid flow rate on the mass transfer characteristics were investigated.
F. Hosseini, M. Rahimi, O. jafari
doaj
Journal of Agriculture and Food Research, 2023 A study was conducted to evaluate the efficiency of a cabinet-type solar dryer with naturally convection drying specifically for Indian gooseberries. One notable advantage of utilizing a passive solar dryer is its reliance on natural energy sources, such
Chhotelal Prajapati, Tanuja Sheorey
doaj +1 more source
Investigation of Liquid–Liquid Two-Phase Flow Pattern in Microreactors for Biodiesel Production [PDF]
Iranian Journal of Chemical Engineering, 2015 "> In the present study, transesterification of soybean oil to Fatty Acid Methyl Ester (FAME) was carried out in the microreactor. The system performance was investigated in the presence of hexane as a cosolvent.
M. Basiri, M. Rahimi, F. Mohammadi
doaj
Tiltrotor CFD part I: validation [PDF]
, 2017 This paper presents performance analyses of the model-scale ERICA and TILTAERO tiltrotors and of the full-scale XV-15 rotor with high-fidelity computational fluids dynamics.
Barakos, George N. +2 more
core +1 more source
Infrared thermal imaging for melt pool analysis in SLM: a feasibility investigation
Virtual and Physical Prototyping, 2018 Melt pool dimension can help to relate process parameters and build part quality in selective laser melting (SLM) process. In this study, a near-infrared thermal imager (about 670 nm spectral range) was employed to collect powder layer thermal signal in ...
Bo Cheng +5 more
doaj +1 more source
Functional Relationships between Kinetic, Flow, and Geometrical Parameters in a High-Temperature Chemical Microreactor. [PDF]
, 2018 Computational fluid dynamics (CFD) simulations and isothermal approximation were applied for the interpretation of experimental measurements of the C10H7Br pyrolysis efficiency in the high-temperature microreactor and of the pressure drop in the flow ...
Ahmed, M +6 more
core +3 more sources
Advanced Engineering Materials, EarlyView.The wettability of aluminum droplets (Al) on different copper substrates (Cu), where liquid Al spreads on solid Cu surfaces to form a liquid–solid interface, is studied numerically and experimentally. The experimental and numerical results show good agreement in the fast‐spreading regime.
Shan Lyu +8 more
wiley +1 more source
Embedded One-Dimensional Orifice Elements for Slosh Load Calculations in Volume-Of-Fluid CFD
Applied Sciences, 2022 For CFD liquid sloshing simulations, fine computational mesh resolutions are typically required to model the flow within small flow passages or orifices found in fuel tanks.
Elrich Botha +2 more
doaj +1 more source
Synopsis of marine prawn fishery of India for the third quarter of 1978 [PDF]
, 1979 The data for the third quarter of 1978 is presented in this paper. The statewise and monthwise details of catch during the months of the quarter and the total catch of prawns for the quarter are summarized.
CMFRI, CFD
core
Experimental and CFD airflow studies of a cleanroom with special respect to air supply inlets [PDF]
, 2010 Investigations were carried out into the airflow in a non-unidirectional airflow cleanroom and its affect on the local airborne particle cleanliness The main influence was the method of air supply A supply inlet with no diffuser gave a pronounced ...
Green, G. +3 more
core +1 more source