Results 71 to 80 of about 1,100 (178)

Dynamic geo‐hydrogeological monitoring‐driven situational awareness for real‐time floor water inrush risk prediction in deep mining

Deep Underground Science and Engineering, EarlyView.
The fused data extracted from the distributed monitoring system as the data basis, combined with dynamic geological data, are imported into a deep learning model. As the geological conditions of mining and excavation change, the risk of water inrush at the working face is retrieved in real time.
Yongjie Li, Huiyong Yin, Fangying Dong, Tao Wu, Chao Zhang   +4 more
wiley   +1 more source

Performance assessment of a potential underground thermal storage facility: Case study of the closed mine Prosper‐Haniel in the Ruhr coal mining area in Germany

Deep Underground Science and Engineering, EarlyView.
This study demonstrates the feasibility of an underground closed‐loop thermal storage facility at a post‐mining site, intended for seasonal heat energy storage. Its principal design shows water flow directions in winter and summer (1, 2), heat pumps (3), an upper water reservoir (4), and connecting pipes (5).
Dmytro Rudakov, Oleksandr Inkin
wiley   +1 more source

Surface Pre-Grouting Borehole Arrangement and Division of the Broken Roof of the Lower Seam of a Bifurcated Coal Seam

Energy Exploration & Exploitation, 2023
The coal roof of the lower seam of a bifurcated coal seam is always broken and is caused by the mining of the upper seam, which results in difficult support for the coal roof. This seriously affects the safe and efficient mining of the lower seam.
Xiaorong Zhai, Yaoshan Bi, Ru Hu, Wu Jiwen, Hongjun Hao   +4 more
doaj   +1 more source

Research on Optimization of Roadway Location in Close-Distance Coal Seam Mining

Frontiers in Science and Engineering
With the continuous exploitation of coal resources, close-distance coal seam mining has gradually become a crucial aspect in coal mine production. During close-distance coal seam mining, due to the small spacing between the upper and lower coal seams, the residual coal pillars and goaf areas left after the mining of the upper coal seam have a ...
openaire   +1 more source

Uniaxial compressive strength prediction and ratio parameter optimization of titanium tailings composite backfill materials using intelligent hybrid models

Deep Underground Science and Engineering, EarlyView.
Based on the 90 datasets, ERT and four optimization algorithms were used to build four hybrid models to predict the UCS of the backfill body. The SMA‐ERT model was the most effective model, and it can reliably guide the design of the backfill ratio parameters. Abstract This study analyzed the feasibility of using titanium (Ti) tailings as a backfilling
Weijun Liu, Zida Liu, Zhixiang Liu
wiley   +1 more source

Experimental and smoothed particle hydrodynamics‐finite element method simulation investigation of synergistic erosion mechanism of gangue‐based abrasive water jets

Deep Underground Science and Engineering, EarlyView.
This study proposes an eco‐friendly coal permeability enhancement technique by utilizing mine waste gangue as an abrasive in high‐pressure water jets. Integrating erosion experiments with smoothed particle hydrodynamics‐finite element method coupled simulations, the research study elucidates the flow field dynamics and a nonlinear solid–liquid ...
Qingxiang Wang, Jiaxu Tang, Qiheng Ren, Ding Wang, Tong Wang   +4 more
wiley   +1 more source

Study on the Migration Laws of Overlying Strata in Backfill Mining of Close-Distance Coal Seams

Processes
To clarify the migration characteristics of overlying strata during backfill mining of close-distance coal seams, the 3306 working face of Chaili Coal Mine was taken as the engineering background, and similar-material simulation, fracture-fractal analysis, and FLAC3D numerical simulation were carried out under an 85% backfill ratio.
Peisen Zhang, Zelin Xu, Xingang Deng, Yong Zhang, Xin Hu   +4 more
openaire   +1 more source

Integrated numerical simulation and source‐sink matching methodology for Basin‐Wide CO2 storage assessment in depleted reservoirs: A Cambay Basin case study

Deep Underground Science and Engineering, EarlyView.
This study presents an integrated workflow to evaluate secure and large‐scale CO2 storage in depleted oil reservoirs of the Cambay Basin, India. Industrial CO2 sources are systematically matched with mature oil fields using a quantitative source–sink framework to minimize transport distance and cost.
Bhaskarjyoti Khanikar
wiley   +1 more source

Disaster mechanism induced by overburden structure and control techniques for close-distance coal seam group

Meitan xuebao
Compared to single-seam mining, the close-distance coal seam group is strongly influenced by the movement of overburden structure resulting from upper seam mining.
Yunliang TAN, Xuebin LI, Xuesheng LIU, Deyuan FAN, Shilin SONG, Yu ZHANG, Hu SONG   +6 more
doaj   +1 more source

Mechanism of “seesaw‐type” rock burst in coal seam mining beneath mountainous areas

Deep Underground Science and Engineering, EarlyView.
This study reveals the mechanism of “seesaw‐type” rock bursts during coal mining beneath mountainous areas. The advancing working face induces nonuniform fracturing of the overburden. The detached mountain mass then undergoes a seesaw‐type rotational movement around a shifting pivot, driving the primary fracture through a characteristic “open‐close ...
Chao Zhou, Xueqiu He, Zhenlei Li, Ping Wang, Dazhao Song, Fuxing Jiang, Shan Yin, Anliang Lü, Menghan Wei, Taoping Zhong   +9 more
wiley   +1 more source