Results 41 to 50 of about 24,743 (266)

Characterization of Defect Distribution in an Additively Manufactured AlSi10Mg as a Function of Processing Parameters and Correlations with Extreme Value Statistics

Advanced Engineering Materials, EarlyView.
Predicting extreme defects in additive manufacturing remains a key challenge limiting its structural reliability. This study proposes a statistical framework that integrates Extreme Value Theory with advanced process indicators to explore defect–process relationships and improve the estimation of critical defect sizes. The approach provides a basis for
Muhammad Muteeb Butt, Varma Kvvssn, Hossein Laieghi, Zia Uddin, Peyman Ansari, E. Kıvanç Sadak, Can Barış Toprak, Hüseyin Kızıl, Enrico Salvati   +8 more
wiley   +1 more source

Experimental Evaluation of 100Cr6 Steel Microindented Surfaces Under Lubricated Nonconformal Point Contacts

Advanced Engineering Materials, EarlyView.
The tribological behavior of 100Cr6 steel spheres textured via Vickers microindentation is evaluated under lubricated sliding by varying both dimple size and density. Fine and dense textures significantly reduce friction across all lubrication regimes, while large dimples increase it.
Farideh Davoodi, Pasquale Guglielmi, Gianfranco Palumbo, Giuseppe Carbone   +3 more
wiley   +1 more source

Experimental Investigation of Lift Enhancement and Drag Reduction of Rotor Airfoil Using Co-flow Jet Concept

Hangkong gongcheng jinzhan, 2021
As the novel active flow control technology,Co-flow Jet concept(CFJ)is one of the most potential methods to achieve the high lift enhancement and drag reduction of rotor airfoil.Based on the OA 312 rotor airfoil,the CFJ rotor airfoil dynamometric model ...
ZHANG Shunlei, YANG Xudong, SONG Bifeng, WANG Bo, LI Zhuoyuan   +4 more
doaj   +1 more source

Thermomechanical Fatigue and Creep–Fatigue Interaction of Inconel 718 Additively Manufactured by Laser Beam Powder Bed Fusion

Advanced Engineering Materials, EarlyView.
Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth, Tomáš Babinský, Jan Lars Riedel, Wen Hao Kan, Aijun Huang, Martin Heilmaier, Ivo Šulák   +6 more
wiley   +1 more source

Near‐Field Electrospinning Micro‐Printhead Achieves Precise Control of Nanofiber Deposition

Advanced Engineering Materials, EarlyView.
A micro‐printhead for near‐field electrospinning enables reproducible deposition of polymer nanofibers with diameters below 50 nm. Systematic parameter studies uncover the mechanisms linking operating conditions to fiber morphology, paving the way for precise and low‐cost nanoscale 3D manufacturing.As a high‐resolution, cost‐effective, and rapid ...
Han Xu, Dario Mager, Jan G. Korvink
wiley   +1 more source

The Effect of Reynolds Number on Jet in Asymmetric Co-Flows: A CFD Study

International Journal of Chemical Engineering, 2018
In rotary kilns in grate-kiln systems for iron ore pelletizing, a long and stable jet flame is needed to ensure a high quality of the pellets. The primary jet issuing from the nozzle interacts with two asymmetric co-flows creating a very complex flow. In
Ziyan Teng, I. A. Sofia Larsson, T. Staffan Lundström, B. Daniel Marjavaara   +3 more
doaj   +1 more source

Study on the Flow Control of the Airfoil Dynamic Stall Using the Co-flow Jet

Hangkong gongcheng jinzhan, 2018
Dynamic stall control is of great significance for enhancement of the airfoil aerodynamic characteristics. In the present study, the co-flow jet(CFJ) flow control method is numerically investigated to control the dynamic stall caused by the pitching ...
Yang Huiqiang, Xu Heyong, Ye Zhengyin
doaj   +1 more source

Combined Process‐ and Phase‐Field‐Simulation to Predict the Microstructure of Single‐Crystal Ni‐Based Superalloys

Advanced Engineering Materials, EarlyView.
A combined finite element and phase‐field approach predicts the evolution of microstructure during the directional solidification of Ni‐based superalloys. The model reveals how withdrawal rate, temperature gradient, and wall thickness control the dendrite spacing, highlighting the strong effect of surface regions in thin sections where dendrite growth ...
Sean Böhm, André B. Baldissera, Rainer Völkl, Uwe Glatzel   +3 more
wiley   +1 more source

Powder Optimization Strategies for Binder Jetting Printing of BaTiO3 and Ba0,6Sr0,4TiO3 Ceramics

Advanced Engineering Materials, EarlyView.
Powder optimization is investigated to enable binder jetting of BaTiO3 and Ba0.6Sr0.4TiO3 ferroelectric ceramics. The antagonistic relationship between flowability and binder compatibility is addressed through binder impregnation of granulated powders and fumed silica addition to fine powders.
Fanny Pruvost, Lionel Presmanes, Soléna Colin, Marie Vidal, Sophie Guillemet‐Fritsch   +4 more
wiley   +1 more source

Numerical Simulation of Low Reynolds Number Particle-Laden Gas Jet by Vortex Method

Journal of Fluid Science and Technology, 2009
An air jet, which remains laminar and axisymmetric in the single-phase flow condition, is simulated numerically in the particle-laden condition. The vortex method for particle-laden gas jet proposed by the authors is employed for the simulation.
Tomomi UCHIYAMA, Hisanori YAGAMI
doaj   +1 more source