Results 101 to 110 of about 1,103 (216)

Caving‐enhanced geothermal system overwhelms fracturing‐ and pipe‐enhanced geothermal system in heat extraction

Deep Underground Science and Engineering, EarlyView.
Our study reveals that caving‐enhanced geothermal systems (C‐EGS) with adequately fractured reservoirs achieve optimal heat extraction by minimizing preferential flow paths, while conventional fracturing (F‐EGS) and pipe‐based (P‐EGS) systems suffer accelerated thermal drawdown.
Fangchao Kang, Tianjiao Li, Yingchun Li, Jinlong Men, Chun'an Tang   +4 more
wiley   +1 more source

Performance assessment of a potential underground thermal storage facility: Case study of the closed mine Prosper‐Haniel in the Ruhr coal mining area in Germany

Deep Underground Science and Engineering, EarlyView.
This study demonstrates the feasibility of an underground closed‐loop thermal storage facility at a post‐mining site, intended for seasonal heat energy storage. Its principal design shows water flow directions in winter and summer (1, 2), heat pumps (3), an upper water reservoir (4), and connecting pipes (5).
Dmytro Rudakov, Oleksandr Inkin
wiley   +1 more source

Carbon emission assessment of tunnel infrastructures: From construction to operation

Deep Underground Science and Engineering, EarlyView.
This study develops a lifecycle carbon accounting framework for tunnel infrastructures, covering design, construction, operation, maintenance, and dismantling. Applied to a subsea tunnel case, the framework reveals the carbon emission distribution among four typical tunnel types and highlights potential carbon offset methods for low‐carbon tunnel ...
Luyuan Long, Wout Broere, Xuehui Zhang, Tian Xia, Richard de Nijs   +4 more
wiley   +1 more source

Uniaxial compressive strength prediction and ratio parameter optimization of titanium tailings composite backfill materials using intelligent hybrid models

Deep Underground Science and Engineering, EarlyView.
Based on the 90 datasets, ERT and four optimization algorithms were used to build four hybrid models to predict the UCS of the backfill body. The SMA‐ERT model was the most effective model, and it can reliably guide the design of the backfill ratio parameters. Abstract This study analyzed the feasibility of using titanium (Ti) tailings as a backfilling
Weijun Liu, Zida Liu, Zhixiang Liu
wiley   +1 more source

Combination of CO 2 ${\text{CO}}_{2}$ storage and geothermal energy production in porous and fractured superhot geothermal systems

Deep Underground Science and Engineering, EarlyView.
The graphical abstract depicts the workflow for porous‐ and fractured‐media simulations, where stochastically generated discrete natural fractures are required for the fracture‐media simulation. Abstract CO 2 ${\text{CO}}_{2}$ leakage is one of the main risks and barriers to geologic carbon storage. However, under the high‐temperature and high‐pressure
Christoph Scherounigg, Rotman Criollo, Victor Vilarrasa, Keita Yoshioka   +3 more
wiley   +1 more source

Modeling and monitoring injectivity evolution during cold CO2 injection with field evidence from aquistore carbon capture and storage operations

Deep Underground Science and Engineering, EarlyView.
This work integrates 5 years of field data from the Aquistore CCS project with a non‐isothermal THM modeling framework to explain how cold CO2 injection alters injectivity over time. The study shows that sustained cooling near the wellbore reduces effective stresses, promotes tensile micro‑cracking, and leads to semi‑reversible permeability enhancement
Alireza Rangriz Shokri, Stephen Talman, Erik Nickel, Rick Chalaturnyk   +3 more
wiley   +1 more source

Design of a Novel CeW/Fe‐TiO2 Catalyst With High Oxygen Vacancy for Enhancing the Reactivity and SO2 Resistance in Low‐Temperature NH3‐SCR Reaction

EcoEnergy, EarlyView.
Fe3+ was introduced into the TiO2 lattice using the hydrothermal method, and low‐valent cations replaced part of Ti4+ to generate oxygen vacancies within the Fe‐Ov‐Ti unit, resulting in CeW/Fe‐TiO2 catalysts with oxygen‐deficient structures. Compared with CeW/TiO2 catalyst, the increase in oxygen vacancy content significantly improved the catalytic ...
Yuhang Wang, Xiaosheng Huang, Guodong Zhang, Haitao Zhang, Yongjie Xi, Zhicheng Tang   +5 more
wiley   +1 more source

Lithium Metal Anode Fabrication: Methods, Challenges, and Strategies

EcoEnergy, EarlyView.
Schematic illustration of four representative fabrication techniques for thin lithium metal anodes: extrusion, molten lithium infusion, electroplating, and physical vapor deposition (PVD). ABSTRACT The pursuit of ultra‐high energy‐dense lithium‐metal batteries (LMBs) has reignited the drive to fabricate ultrathin high‐quality lithium metal anodes. This
Ji Hyun Baek, Mi Ji Kang, Ho Won Jang
wiley   +1 more source

Recovery and Repurposing of End‐of‐Life Graphitic Anodes for Green Lithium‐Ion Batteries

EcoEnergy, EarlyView.
This review summarizes the degradation mechanisms of spent graphite anodes in lithium‐ion batteries and highlights key recycling, regeneration, and modification strategies, including hydrometallurgical and pyrometallurgical approaches. It also discusses recent advances in surface engineering, structural regulation, and material hybridization, offering ...
Wei Wei, Weiguo Liu, Jiangqi Zhou
wiley   +1 more source

Carbon Anodes for Low‐Temperature Nonaqueous Alkali Metal‐Ion Batteries

EcoEnergy, EarlyView.
This review summarizes recent progress in carbon anodes for low‐temperature nonaqueous alkali‐metal ion batteries. Fundamental thermodynamic and kinetic limitations are examined, alongside a systematic discussion of graphite, hard carbon, and emerging carbon architectures.
Zhichun Miao, Dandan Yu, Guojie Liu, Yuyang Qin, Jingyun Mou, Wenlong Song, Lu Shi, Zengqin Xiao, Xin Yuan, Huayu Chen, Laishun Qin, Da Chen   +11 more
wiley   +1 more source