Results 141 to 150 of about 1,213,077 (307)
Influence of Wall Deformation Structure on the Liquid Film Flow Behavior Under Turbulent Conditions
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT To explore the influence of typical wall deformation structure in the scrubbing‐cooling tube on the liquid film, this paper studied the liquid film flow behavior on the riblet walls with representative riblet radii and compared them with the flat wall. Under different liquid film Reynolds numbers (Rel = 8.3 × 103 ~ 3.14 × 104), the liquid film
Qian Liu +5 more
wiley +1 more source
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT Bamboo charcoal–based extruded activated carbons were prepared via molding, pre‐oxidation, carbonization, and steam activation, with coal tar, phenolic resin, and their mixtures employed as binders based on practical availability and technical feasibility. This study focused on the regulatory effects of binders on the mechanical properties and
Huitao Jiang, Songlin Zuo
wiley +1 more source
Radiation characteristics of coals at different stages of metamorphism
Записки Горного институтаThe formation of deposits and subsequent metamorphic processes that affect concentrations of radioactive elements in coal can indicate ongoing geological activities, therefore, analyzing trends in the radiation characteristics of coal throughout the ...
Nadezhda L. Aluker +2 more
doaj
The Effect of Sintering Flue Gas Composition on NO Reduction in Coke
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT The strategy of substituting combustion air with sintering flue gas in circulating fluidized bed (CFB) systems provides a low‐cost and highly efficient approach for the purification of sintering off‐gas. In this work, coke was employed as the reducing agent, and a high‐temperature vertical tube furnace was used to simulate the dense‐phase ...
Canbin Huang +5 more
wiley +1 more source
THE NIGERIAN COAL CORPORATION: AN EVALUATION OF PRODUCTION PERFORMANCE(1960 1987) [PDF]
COAL WAS DISCOVERED IN NIGERIA IN 1909 AND COAL MINING STARTED WITH A DRIFT MINE AT OGBETE, ENUGU IN 1915. SINCE 1958/59, WHEN COAL PRODUCTION REACHED ITS PEAK, THERE HAS BEEN A PERSISTENT FLUCTUATION IN THE AMOUNT OF COAL PRODUCED IN SUBSEQUENT YEARS ...
DR. GODWIN CHUKWUDUM NWAOBI
core
Construction of Lean Coal Molecular Structure Model Based on Spectroscopic Characterization
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT The chemical structure of coal exerts a profound influence on its properties and utilization pathways. A comprehensive analysis of coal's molecular structure is crucial for mitigating environmental pollution arising from coal combustion and improving the efficiency of coal utilization.
Song Liu +5 more
wiley +1 more source
Thermal Calculations for Co‐Firing of Hydrogen/Ammonia and Coal in 660‐MW Coal‐Fired Boilers
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT To achieve a clean energy transition under the dual carbon goals, blending hydrogen/ammonia into pulverized coal boilers represents a key technological pathway. Different hydrogen/ammonia co‐firing ratios (5%–50%) are investigated for their impact on the thermodynamic characteristics of 660‐MW supercritical boiler at 100% and 20% boiler ...
Yaodong Da +7 more
wiley +1 more source
Asia-Pacific Journal of Chemical Engineering, EarlyView.ABSTRACT With the rapid development of the petrochemical industry, efficient separation technology for olefins and alkanes with the same number of carbon atoms has become an important research topic to enhance the efficiency of petroleum resource utilization and optimize product quality.
Shasha Zhao, Kang Zhao, Zhen Liu
wiley +1 more source
A Novel Green Method for Producing Medical‐Grade Chitosan From Loligo plei Squid Pens
Journal of Applied Polymer Science, EarlyView.This work demonstrates a sustainable and simplified process for the production of medical‐grade chitosan from the feathers of the squid Loligo plei, employing mild chemical treatments to preserve the integrity of the polymer while achieving high purity and performance.
Talita Martins +7 more
wiley +1 more source